Initial commit: Linux kernel 4.19 for Unplugged OS

This commit is contained in:
ziv committed 2025-10-06 13:52:42 +00:00
commit d30235b04c
80519 files changed
+35800681

No files matched your search

@@ -0,0 +1,19 @@
PCI TEST ENDPOINT FUNCTION
name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
Configurable Fields:
vendorid : should be 0x104c
deviceid : should be 0xb500 for DRA74x and 0xb501 for DRA72x
revid : don't care
progif_code : don't care
subclass_code : don't care
baseclass_code : should be 0xff
cache_line_size : don't care
subsys_vendor_id : don't care
subsys_id : don't care
interrupt_pin : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
msi_interrupts : Should be 1 to 32 depending on the number of MSI interrupts
to test
msix_interrupts : Should be 1 to 2048 depending on the number of MSI-X
interrupts to test
@@ -0,0 +1,105 @@
CONFIGURING PCI ENDPOINT USING CONFIGFS
Kishon Vijay Abraham I <kishon@ti.com>
The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
PCI endpoint function and to bind the endpoint function
with the endpoint controller. (For introducing other mechanisms to
configure the PCI Endpoint Function refer to [1]).
*) Mounting configfs
The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
directory. configfs can be mounted using the following command.
mount -t configfs none /sys/kernel/config
*) Directory Structure
The pci_ep configfs has two directories at its root: controllers and
functions. Every EPC device present in the system will have an entry in
the *controllers* directory and and every EPF driver present in the system
will have an entry in the *functions* directory.
/sys/kernel/config/pci_ep/
.. controllers/
.. functions/
*) Creating EPF Device
Every registered EPF driver will be listed in controllers directory. The
entries corresponding to EPF driver will be created by the EPF core.
/sys/kernel/config/pci_ep/functions/
.. <EPF Driver1>/
... <EPF Device 11>/
... <EPF Device 21>/
.. <EPF Driver2>/
... <EPF Device 12>/
... <EPF Device 22>/
In order to create a <EPF device> of the type probed by <EPF Driver>, the
user has to create a directory inside <EPF DriverN>.
Every <EPF device> directory consists of the following entries that can be
used to configure the standard configuration header of the endpoint function.
(These entries are created by the framework when any new <EPF Device> is
created)
.. <EPF Driver1>/
... <EPF Device 11>/
... vendorid
... deviceid
... revid
... progif_code
... subclass_code
... baseclass_code
... cache_line_size
... subsys_vendor_id
... subsys_id
... interrupt_pin
*) EPC Device
Every registered EPC device will be listed in controllers directory. The
entries corresponding to EPC device will be created by the EPC core.
/sys/kernel/config/pci_ep/controllers/
.. <EPC Device1>/
... <Symlink EPF Device11>/
... <Symlink EPF Device12>/
... start
.. <EPC Device2>/
... <Symlink EPF Device21>/
... <Symlink EPF Device22>/
... start
The <EPC Device> directory will have a list of symbolic links to
<EPF Device>. These symbolic links should be created by the user to
represent the functions present in the endpoint device.
The <EPC Device> directory will also have a *start* field. Once
"1" is written to this field, the endpoint device will be ready to
establish the link with the host. This is usually done after
all the EPF devices are created and linked with the EPC device.
| controllers/
| <Directory: EPC name>/
| <Symbolic Link: Function>
| start
| functions/
| <Directory: EPF driver>/
| <Directory: EPF device>/
| vendorid
| deviceid
| revid
| progif_code
| subclass_code
| baseclass_code
| cache_line_size
| subsys_vendor_id
| subsys_id
| interrupt_pin
| function
[1] -> Documentation/PCI/endpoint/pci-endpoint.txt
+215
View File
@@ -0,0 +1,215 @@
PCI ENDPOINT FRAMEWORK
Kishon Vijay Abraham I <kishon@ti.com>
This document is a guide to use the PCI Endpoint Framework in order to create
endpoint controller driver, endpoint function driver, and using configfs
interface to bind the function driver to the controller driver.
1. Introduction
Linux has a comprehensive PCI subsystem to support PCI controllers that
operates in Root Complex mode. The subsystem has capability to scan PCI bus,
assign memory resources and IRQ resources, load PCI driver (based on
vendor ID, device ID), support other services like hot-plug, power management,
advanced error reporting and virtual channels.
However the PCI controller IP integrated in some SoCs is capable of operating
either in Root Complex mode or Endpoint mode. PCI Endpoint Framework will
add endpoint mode support in Linux. This will help to run Linux in an
EP system which can have a wide variety of use cases from testing or
validation, co-processor accelerator, etc.
2. PCI Endpoint Core
The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
library, the Endpoint Function library, and the configfs layer to bind the
endpoint function with the endpoint controller.
2.1 PCI Endpoint Controller(EPC) Library
The EPC library provides APIs to be used by the controller that can operate
in endpoint mode. It also provides APIs to be used by function driver/library
in order to implement a particular endpoint function.
2.1.1 APIs for the PCI controller Driver
This section lists the APIs that the PCI Endpoint core provides to be used
by the PCI controller driver.
*) devm_pci_epc_create()/pci_epc_create()
The PCI controller driver should implement the following ops:
* write_header: ops to populate configuration space header
* set_bar: ops to configure the BAR
* clear_bar: ops to reset the BAR
* alloc_addr_space: ops to allocate in PCI controller address space
* free_addr_space: ops to free the allocated address space
* raise_irq: ops to raise a legacy, MSI or MSI-X interrupt
* start: ops to start the PCI link
* stop: ops to stop the PCI link
The PCI controller driver can then create a new EPC device by invoking
devm_pci_epc_create()/pci_epc_create().
*) devm_pci_epc_destroy()/pci_epc_destroy()
The PCI controller driver can destroy the EPC device created by either
devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
pci_epc_destroy().
*) pci_epc_linkup()
In order to notify all the function devices that the EPC device to which
they are linked has established a link with the host, the PCI controller
driver should invoke pci_epc_linkup().
*) pci_epc_mem_init()
Initialize the pci_epc_mem structure used for allocating EPC addr space.
*) pci_epc_mem_exit()
Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
2.1.2 APIs for the PCI Endpoint Function Driver
This section lists the APIs that the PCI Endpoint core provides to be used
by the PCI endpoint function driver.
*) pci_epc_write_header()
The PCI endpoint function driver should use pci_epc_write_header() to
write the standard configuration header to the endpoint controller.
*) pci_epc_set_bar()
The PCI endpoint function driver should use pci_epc_set_bar() to configure
the Base Address Register in order for the host to assign PCI addr space.
Register space of the function driver is usually configured
using this API.
*) pci_epc_clear_bar()
The PCI endpoint function driver should use pci_epc_clear_bar() to reset
the BAR.
*) pci_epc_raise_irq()
The PCI endpoint function driver should use pci_epc_raise_irq() to raise
Legacy Interrupt, MSI or MSI-X Interrupt.
*) pci_epc_mem_alloc_addr()
The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
allocate memory address from EPC addr space which is required to access
RC's buffer
*) pci_epc_mem_free_addr()
The PCI endpoint function driver should use pci_epc_mem_free_addr() to
free the memory space allocated using pci_epc_mem_alloc_addr().
2.1.3 Other APIs
There are other APIs provided by the EPC library. These are used for binding
the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
using these APIs.
*) pci_epc_get()
Get a reference to the PCI endpoint controller based on the device name of
the controller.
*) pci_epc_put()
Release the reference to the PCI endpoint controller obtained using
pci_epc_get()
*) pci_epc_add_epf()
Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
can have up to 8 functions according to the specification.
*) pci_epc_remove_epf()
Remove the PCI endpoint function from PCI endpoint controller.
*) pci_epc_start()
The PCI endpoint function driver should invoke pci_epc_start() once it
has configured the endpoint function and wants to start the PCI link.
*) pci_epc_stop()
The PCI endpoint function driver should invoke pci_epc_stop() to stop
the PCI LINK.
2.2 PCI Endpoint Function(EPF) Library
The EPF library provides APIs to be used by the function driver and the EPC
library to provide endpoint mode functionality.
2.2.1 APIs for the PCI Endpoint Function Driver
This section lists the APIs that the PCI Endpoint core provides to be used
by the PCI endpoint function driver.
*) pci_epf_register_driver()
The PCI Endpoint Function driver should implement the following ops:
* bind: ops to perform when a EPC device has been bound to EPF device
* unbind: ops to perform when a binding has been lost between a EPC
device and EPF device
* linkup: ops to perform when the EPC device has established a
connection with a host system
The PCI Function driver can then register the PCI EPF driver by using
pci_epf_register_driver().
*) pci_epf_unregister_driver()
The PCI Function driver can unregister the PCI EPF driver by using
pci_epf_unregister_driver().
*) pci_epf_alloc_space()
The PCI Function driver can allocate space for a particular BAR using
pci_epf_alloc_space().
*) pci_epf_free_space()
The PCI Function driver can free the allocated space
(using pci_epf_alloc_space) by invoking pci_epf_free_space().
2.2.2 APIs for the PCI Endpoint Controller Library
This section lists the APIs that the PCI Endpoint core provides to be used
by the PCI endpoint controller library.
*) pci_epf_linkup()
The PCI endpoint controller library invokes pci_epf_linkup() when the
EPC device has established the connection to the host.
2.2.2 Other APIs
There are other APIs provided by the EPF library. These are used to notify
the function driver when the EPF device is bound to the EPC device.
pci-ep-cfs.c can be used as reference for using these APIs.
*) pci_epf_create()
Create a new PCI EPF device by passing the name of the PCI EPF device.
This name will be used to bind the the EPF device to a EPF driver.
*) pci_epf_destroy()
Destroy the created PCI EPF device.
*) pci_epf_bind()
pci_epf_bind() should be invoked when the EPF device has been bound to
a EPC device.
*) pci_epf_unbind()
pci_epf_unbind() should be invoked when the binding between EPC device
and EPF device is lost.
@@ -0,0 +1,87 @@
PCI TEST
Kishon Vijay Abraham I <kishon@ti.com>
Traditionally PCI RC has always been validated by using standard
PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
However with the addition of EP-core in linux kernel, it is possible
to configure a PCI controller that can operate in EP mode to work as
a test device.
The PCI endpoint test device is a virtual device (defined in software)
used to test the endpoint functionality and serve as a sample driver
for other PCI endpoint devices (to use the EP framework).
The PCI endpoint test device has the following registers:
1) PCI_ENDPOINT_TEST_MAGIC
2) PCI_ENDPOINT_TEST_COMMAND
3) PCI_ENDPOINT_TEST_STATUS
4) PCI_ENDPOINT_TEST_SRC_ADDR
5) PCI_ENDPOINT_TEST_DST_ADDR
6) PCI_ENDPOINT_TEST_SIZE
7) PCI_ENDPOINT_TEST_CHECKSUM
8) PCI_ENDPOINT_TEST_IRQ_TYPE
9) PCI_ENDPOINT_TEST_IRQ_NUMBER
*) PCI_ENDPOINT_TEST_MAGIC
This register will be used to test BAR0. A known pattern will be written
and read back from MAGIC register to verify BAR0.
*) PCI_ENDPOINT_TEST_COMMAND:
This register will be used by the host driver to indicate the function
that the endpoint device must perform.
Bitfield Description:
Bit 0 : raise legacy IRQ
Bit 1 : raise MSI IRQ
Bit 2 : raise MSI-X IRQ
Bit 3 : read command (read data from RC buffer)
Bit 4 : write command (write data to RC buffer)
Bit 5 : copy command (copy data from one RC buffer to another
RC buffer)
*) PCI_ENDPOINT_TEST_STATUS
This register reflects the status of the PCI endpoint device.
Bitfield Description:
Bit 0 : read success
Bit 1 : read fail
Bit 2 : write success
Bit 3 : write fail
Bit 4 : copy success
Bit 5 : copy fail
Bit 6 : IRQ raised
Bit 7 : source address is invalid
Bit 8 : destination address is invalid
*) PCI_ENDPOINT_TEST_SRC_ADDR
This register contains the source address (RC buffer address) for the
COPY/READ command.
*) PCI_ENDPOINT_TEST_DST_ADDR
This register contains the destination address (RC buffer address) for
the COPY/WRITE command.
*) PCI_ENDPOINT_TEST_IRQ_TYPE
This register contains the interrupt type (Legacy/MSI) triggered
for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
Possible types:
- Legacy : 0
- MSI : 1
- MSI-X : 2
*) PCI_ENDPOINT_TEST_IRQ_NUMBER
This register contains the triggered ID interrupt.
Admissible values:
- Legacy : 0
- MSI : [1 .. 32]
- MSI-X : [1 .. 2048]
@@ -0,0 +1,203 @@
PCI TEST USERGUIDE
Kishon Vijay Abraham I <kishon@ti.com>
This document is a guide to help users use pci-epf-test function driver
and pci_endpoint_test host driver for testing PCI. The list of steps to
be followed in the host side and EP side is given below.
1. Endpoint Device
1.1 Endpoint Controller Devices
To find the list of endpoint controller devices in the system:
# ls /sys/class/pci_epc/
51000000.pcie_ep
If PCI_ENDPOINT_CONFIGFS is enabled
# ls /sys/kernel/config/pci_ep/controllers
51000000.pcie_ep
1.2 Endpoint Function Drivers
To find the list of endpoint function drivers in the system:
# ls /sys/bus/pci-epf/drivers
pci_epf_test
If PCI_ENDPOINT_CONFIGFS is enabled
# ls /sys/kernel/config/pci_ep/functions
pci_epf_test
1.3 Creating pci-epf-test Device
PCI endpoint function device can be created using the configfs. To create
pci-epf-test device, the following commands can be used
# mount -t configfs none /sys/kernel/config
# cd /sys/kernel/config/pci_ep/
# mkdir functions/pci_epf_test/func1
The "mkdir func1" above creates the pci-epf-test function device that will
be probed by pci_epf_test driver.
The PCI endpoint framework populates the directory with the following
configurable fields.
# ls functions/pci_epf_test/func1
baseclass_code interrupt_pin progif_code subsys_id
cache_line_size msi_interrupts revid subsys_vendorid
deviceid msix_interrupts subclass_code vendorid
The PCI endpoint function driver populates these entries with default values
when the device is bound to the driver. The pci-epf-test driver populates
vendorid with 0xffff and interrupt_pin with 0x0001
# cat functions/pci_epf_test/func1/vendorid
0xffff
# cat functions/pci_epf_test/func1/interrupt_pin
0x0001
1.4 Configuring pci-epf-test Device
The user can configure the pci-epf-test device using configfs entry. In order
to change the vendorid and the number of MSI interrupts used by the function
device, the following commands can be used.
# echo 0x104c > functions/pci_epf_test/func1/vendorid
# echo 0xb500 > functions/pci_epf_test/func1/deviceid
# echo 16 > functions/pci_epf_test/func1/msi_interrupts
# echo 8 > functions/pci_epf_test/func1/msix_interrupts
1.5 Binding pci-epf-test Device to EP Controller
In order for the endpoint function device to be useful, it has to be bound to
a PCI endpoint controller driver. Use the configfs to bind the function
device to one of the controller driver present in the system.
# ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
Once the above step is completed, the PCI endpoint is ready to establish a link
with the host.
1.6 Start the Link
In order for the endpoint device to establish a link with the host, the _start_
field should be populated with '1'.
# echo 1 > controllers/51000000.pcie_ep/start
2. RootComplex Device
2.1 lspci Output
Note that the devices listed here correspond to the value populated in 1.4 above
00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
2.2 Using Endpoint Test function Device
pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
tests. Before pcitest.sh can be used pcitest.c should be compiled using the
following commands.
cd <kernel-dir>
make headers_install ARCH=arm
arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
cp pcitest <rootfs>/usr/sbin/
cp tools/pci/pcitest.sh <rootfs>
2.2.1 pcitest.sh Output
# ./pcitest.sh
BAR tests
BAR0: OKAY
BAR1: OKAY
BAR2: OKAY
BAR3: OKAY
BAR4: NOT OKAY
BAR5: NOT OKAY
Interrupt tests
SET IRQ TYPE TO LEGACY: OKAY
LEGACY IRQ: NOT OKAY
SET IRQ TYPE TO MSI: OKAY
MSI1: OKAY
MSI2: OKAY
MSI3: OKAY
MSI4: OKAY
MSI5: OKAY
MSI6: OKAY
MSI7: OKAY
MSI8: OKAY
MSI9: OKAY
MSI10: OKAY
MSI11: OKAY
MSI12: OKAY
MSI13: OKAY
MSI14: OKAY
MSI15: OKAY
MSI16: OKAY
MSI17: NOT OKAY
MSI18: NOT OKAY
MSI19: NOT OKAY
MSI20: NOT OKAY
MSI21: NOT OKAY
MSI22: NOT OKAY
MSI23: NOT OKAY
MSI24: NOT OKAY
MSI25: NOT OKAY
MSI26: NOT OKAY
MSI27: NOT OKAY
MSI28: NOT OKAY
MSI29: NOT OKAY
MSI30: NOT OKAY
MSI31: NOT OKAY
MSI32: NOT OKAY
SET IRQ TYPE TO MSI-X: OKAY
MSI-X1: OKAY
MSI-X2: OKAY
MSI-X3: OKAY
MSI-X4: OKAY
MSI-X5: OKAY
MSI-X6: OKAY
MSI-X7: OKAY
MSI-X8: OKAY
MSI-X9: NOT OKAY
MSI-X10: NOT OKAY
MSI-X11: NOT OKAY
MSI-X12: NOT OKAY
MSI-X13: NOT OKAY
MSI-X14: NOT OKAY
MSI-X15: NOT OKAY
MSI-X16: NOT OKAY
[...]
MSI-X2047: NOT OKAY
MSI-X2048: NOT OKAY
Read Tests
SET IRQ TYPE TO MSI: OKAY
READ ( 1 bytes): OKAY
READ ( 1024 bytes): OKAY
READ ( 1025 bytes): OKAY
READ (1024000 bytes): OKAY
READ (1024001 bytes): OKAY
Write Tests
WRITE ( 1 bytes): OKAY
WRITE ( 1024 bytes): OKAY
WRITE ( 1025 bytes): OKAY
WRITE (1024000 bytes): OKAY
WRITE (1024001 bytes): OKAY
Copy Tests
COPY ( 1 bytes): OKAY
COPY ( 1024 bytes): OKAY
COPY ( 1025 bytes): OKAY
COPY (1024000 bytes): OKAY
COPY (1024001 bytes): OKAY