Initial commit: Linux kernel 4.19 for Unplugged OS

This commit is contained in:
ziv committed 2025-10-06 13:52:42 +00:00
commit d30235b04c
80519 files changed
+35800681

No files matched your search

+105
View File
@@ -0,0 +1,105 @@
===================================
cfag12864b LCD Driver Documentation
===================================
License: GPLv2
Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
--------
0. INDEX
--------
1. DRIVER INFORMATION
2. DEVICE INFORMATION
3. WIRING
4. USERSPACE PROGRAMMING
---------------------
1. DRIVER INFORMATION
---------------------
This driver supports a cfag12864b LCD.
---------------------
2. DEVICE INFORMATION
---------------------
Manufacturer: Crystalfontz
Device Name: Crystalfontz 12864b LCD Series
Device Code: cfag12864b
Webpage: http://www.crystalfontz.com
Device Webpage: http://www.crystalfontz.com/products/12864b/
Type: LCD (Liquid Crystal Display)
Width: 128
Height: 64
Colors: 2 (B/N)
Controller: ks0108
Controllers: 2
Pages: 8 each controller
Addresses: 64 each page
Data size: 1 byte each address
Memory size: 2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte
---------
3. WIRING
---------
The cfag12864b LCD Series don't have official wiring.
The common wiring is done to the parallel port as shown:
Parallel Port cfag12864b
Name Pin# Pin# Name
Strobe ( 1)------------------------------(17) Enable
Data 0 ( 2)------------------------------( 4) Data 0
Data 1 ( 3)------------------------------( 5) Data 1
Data 2 ( 4)------------------------------( 6) Data 2
Data 3 ( 5)------------------------------( 7) Data 3
Data 4 ( 6)------------------------------( 8) Data 4
Data 5 ( 7)------------------------------( 9) Data 5
Data 6 ( 8)------------------------------(10) Data 6
Data 7 ( 9)------------------------------(11) Data 7
(10) [+5v]---( 1) Vdd
(11) [GND]---( 2) Ground
(12) [+5v]---(14) Reset
(13) [GND]---(15) Read / Write
Line (14)------------------------------(13) Controller Select 1
(15)
Init (16)------------------------------(12) Controller Select 2
Select (17)------------------------------(16) Data / Instruction
Ground (18)---[GND] [+5v]---(19) LED +
Ground (19)---[GND]
Ground (20)---[GND] E A Values:
Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm
Ground (22)---[GND] | - P1 = Preset = 10 Kohm
Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm
Ground (24)---[GND] | |
Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
------------------------
4. USERSPACE PROGRAMMING
------------------------
The cfag12864bfb describes a framebuffer device (/dev/fbX).
It has a size of 1024 bytes = 1 Kbyte.
Each bit represents one pixel. If the bit is high, the pixel will
turn on. If the pixel is low, the pixel will turn off.
You can use the framebuffer as a file: fopen, fwrite, fclose...
Although the LCD won't get updated until the next refresh time arrives.
Also, you can mmap the framebuffer: open & mmap, munmap & close...
which is the best option for most uses.
Check samples/auxdisplay/cfag12864b-example.c
for a real working userspace complete program with usage examples.
+55
View File
@@ -0,0 +1,55 @@
==========================================
ks0108 LCD Controller Driver Documentation
==========================================
License: GPLv2
Author & Maintainer: Miguel Ojeda Sandonis
Date: 2006-10-27
--------
0. INDEX
--------
1. DRIVER INFORMATION
2. DEVICE INFORMATION
3. WIRING
---------------------
1. DRIVER INFORMATION
---------------------
This driver supports the ks0108 LCD controller.
---------------------
2. DEVICE INFORMATION
---------------------
Manufacturer: Samsung
Device Name: KS0108 LCD Controller
Device Code: ks0108
Webpage: -
Device Webpage: -
Type: LCD Controller (Liquid Crystal Display Controller)
Width: 64
Height: 64
Colors: 2 (B/N)
Pages: 8
Addresses: 64 each page
Data size: 1 byte each address
Memory size: 8 * 64 * 1 = 512 bytes
---------
3. WIRING
---------
The driver supports data parallel port wiring.
If you aren't building LCD related hardware, you should check
your LCD specific wiring information in the same folder.
For example, check Documentation/auxdisplay/cfag12864b.
@@ -0,0 +1,24 @@
Some LCDs allow you to define up to 8 characters, mapped to ASCII
characters 0 to 7. The escape code to define a new character is
'\e[LG' followed by one digit from 0 to 7, representing the character
number, and up to 8 couples of hex digits terminated by a semi-colon
(';'). Each couple of digits represents a line, with 1-bits for each
illuminated pixel with LSB on the right. Lines are numbered from the
top of the character to the bottom. On a 5x7 matrix, only the 5 lower
bits of the 7 first bytes are used for each character. If the string
is incomplete, only complete lines will be redefined. Here are some
examples :
printf "\e[LG0010101050D1F0C04;" => 0 = [enter]
printf "\e[LG1040E1F0000000000;" => 1 = [up]
printf "\e[LG2000000001F0E0400;" => 2 = [down]
printf "\e[LG3040E1F001F0E0400;" => 3 = [up-down]
printf "\e[LG40002060E1E0E0602;" => 4 = [left]
printf "\e[LG500080C0E0F0E0C08;" => 5 = [right]
printf "\e[LG60016051516141400;" => 6 = "IP"
printf "\e[LG00103071F1F070301;" => big speaker
printf "\e[LG00002061E1E060200;" => small speaker
Willy