Initial commit: Linux kernel 4.19 for Unplugged OS

This commit is contained in:
ziv committed 2025-10-06 13:52:42 +00:00
commit d30235b04c
80519 files changed
+35800681

No files matched your search

@@ -0,0 +1,41 @@
* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
Required properties:
- compatible : property name that conveys the platform architecture
identifiers, as 'IBM,vtpm'
- device_type : specifies type of virtual device
- interrupts : property specifying the interrupt source number and
sense code associated with this virtual I/O Adapters
- ibm,my-drc-index : integer index for the connector between the device
and its parent - present only if Dynamic
Reconfiguration(DR) Connector is enabled
- ibm,#dma-address-cells: specifies the number of cells that are used to
encode the physical address field of dma-window
properties
- ibm,#dma-size-cells : specifies the number of cells that are used to
encode the size field of dma-window properties
- ibm,my-dma-window : specifies DMA window associated with this virtual
IOA
- ibm,loc-code : specifies the unique and persistent location code
associated with this virtual I/O Adapters
- linux,sml-base : 64-bit base address of the reserved memory allocated
for the firmware event log
- linux,sml-size : size of the memory allocated for the firmware event log
Example (IBM Virtual Trusted Platform Module)
---------------------------------------------
vtpm@30000003 {
ibm,#dma-size-cells = <0x2>;
compatible = "IBM,vtpm";
device_type = "IBM,vtpm";
ibm,my-drc-index = <0x30000003>;
ibm,#dma-address-cells = <0x2>;
linux,sml-base = <0xc60e 0x0>;
interrupts = <0xa0003 0x0>;
ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
ibm,loc-code = "U8286.41A.10082DV-V3-C3";
reg = <0x30000003>;
linux,sml-size = <0xbce10200>;
};
@@ -0,0 +1,34 @@
* STMicroelectronics SAS. ST33ZP24 TPM SoC
Required properties:
- compatible: Should be "st,st33zp24-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
Optional ST33ZP24 Properties:
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
&i2c2 {
st33zp24: st33zp24@13 {
compatible = "st,st33zp24-i2c";
reg = <0x13>;
clock-frequency = <400000>;
interrupt-parent = <&gpio5>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
};
};
@@ -0,0 +1,32 @@
* STMicroelectronics SAS. ST33ZP24 TPM SoC
Required properties:
- compatible: Should be "st,st33zp24-spi".
- spi-max-frequency: Maximum SPI frequency (<= 10000000).
Optional ST33ZP24 Properties:
- interrupts: GPIO interrupt to which the chip is connected
- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
If set, power must be present when the platform is going into sleep/hibernate mode.
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
&mcspi4 {
st33zp24@0 {
compatible = "st,st33zp24-spi";
spi-max-frequency = <10000000>;
interrupt-parent = <&gpio5>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
};
};
@@ -0,0 +1,26 @@
* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
Required properties:
- compatible : 'manufacturer,model', eg. nuvoton,npct650
- label : human readable string describing the device, eg. "tpm"
- linux,sml-base : 64-bit base address of the reserved memory allocated for
the firmware event log
- linux,sml-size : size of the memory allocated for the firmware event log
Optional properties:
- powered-while-suspended: present when the TPM is left powered on between
suspend and resume (makes the suspend/resume
callbacks do nothing).
Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
----------------------------------------------------------
tpm@57 {
reg = <0x57>;
label = "tpm";
compatible = "nuvoton,npct650", "nuvoton,npct601";
linux,sml-base = <0x7f 0xfd450000>;
linux,sml-size = <0x10000>;
};
@@ -0,0 +1,25 @@
Trusted Computing Group MMIO Trusted Platform Module
The TCG defines multi vendor standard for accessing a TPM chip, this
is the standard protocol defined to access the TPM via MMIO. Typically
this interface will be implemented over Intel's LPC bus.
Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
publication for the specification.
Required properties:
- compatible: should contain a string below for the chip, followed by
"tcg,tpm-tis-mmio". Valid chip strings are:
* "atmel,at97sc3204"
- reg: The location of the MMIO registers, should be at least 0x5000 bytes
- interrupts: An optional interrupt indicating command completion.
Example:
tpm_tis@90000 {
compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
reg = <0x90000 0x5000>;
interrupt-parent = <&EIC0>;
interrupts = <1 2>;
};
@@ -0,0 +1,23 @@
Required properties:
- compatible: should be one of the following
"st,st33htpm-spi"
"infineon,slb9670"
"tcg,tpm_tis-spi"
- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
&mcspi4 {
tpm_tis@0 {
compatible = "tcg,tpm_tis-spi";
spi-max-frequency = <10000000>;
};
};