werunplugged/unplugged-kernel
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial commit: Linux kernel 4.19 for Unplugged OS

Browse Source
This commit is contained in:
ziv committed 2025-10-06 13:52:42 +00:00
commit d30235b04c
80519 files changed
+35800681
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

include/linux/mmc/card.h
+334
View File
@@ -0,0 +1,334 @@
/*
* linux/include/linux/mmc/card.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Card driver specific definitions.
*/
#ifndef LINUX_MMC_CARD_H
#define LINUX_MMC_CARD_H
#include <linux/device.h>
#include <linux/mod_devicetable.h>
struct mmc_cid {
unsigned int manfid;
char prod_name[8];
unsigned char prv;
unsigned int serial;
unsigned short oemid;
unsigned short year;
unsigned char hwrev;
unsigned char fwrev;
unsigned char month;
};
struct mmc_csd {
unsigned char structure;
unsigned char mmca_vsn;
unsigned short cmdclass;
unsigned short taac_clks;
unsigned int taac_ns;
unsigned int c_size;
unsigned int r2w_factor;
unsigned int max_dtr;
unsigned int erase_size; /* In sectors */
unsigned int wp_grp_size;
unsigned int read_blkbits;
unsigned int write_blkbits;
unsigned int capacity;
unsigned int read_partial:1,
read_misalign:1,
write_partial:1,
write_misalign:1,
dsr_imp:1;
};
struct mmc_ext_csd {
u8 rev;
u8 erase_group_def;
u8 sec_feature_support;
u8 rel_sectors;
u8 rel_param;
u8 part_config;
u8 cache_ctrl;
u8 rst_n_function;
u8 max_packed_writes;
u8 max_packed_reads;
u8 packed_event_en;
unsigned int part_time; /* Units: ms */
unsigned int sa_timeout; /* Units: 100ns */
unsigned int generic_cmd6_time; /* Units: 10ms */
unsigned int power_off_longtime; /* Units: ms */
u8 power_off_notification; /* state */
unsigned int hs_max_dtr;
unsigned int hs200_max_dtr;
#define MMC_HIGH_26_MAX_DTR 26000000
#define MMC_HIGH_52_MAX_DTR 52000000
#define MMC_HIGH_DDR_MAX_DTR 52000000
#define MMC_HS200_MAX_DTR 200000000
unsigned int sectors;
unsigned int hc_erase_size; /* In sectors */
unsigned int hc_erase_timeout; /* In milliseconds */
unsigned int sec_trim_mult; /* Secure trim multiplier */
unsigned int sec_erase_mult; /* Secure erase multiplier */
unsigned int trim_timeout; /* In milliseconds */
bool partition_setting_completed; /* enable bit */
unsigned long long enhanced_area_offset; /* Units: Byte */
unsigned int enhanced_area_size; /* Units: KB */
unsigned int cache_size; /* Units: KB */
bool hpi_en; /* HPI enablebit */
bool hpi; /* HPI support bit */
unsigned int hpi_cmd; /* cmd used as HPI */
bool bkops; /* background support bit */
bool man_bkops_en; /* manual bkops enable bit */
bool auto_bkops_en; /* auto bkops enable bit */
unsigned int data_sector_size; /* 512 bytes or 4KB */
unsigned int data_tag_unit_size; /* DATA TAG UNIT size */
unsigned int boot_ro_lock; /* ro lock support */
bool boot_ro_lockable;
bool ffu_capable; /* Firmware upgrade support */
bool cmdq_en; /* Command Queue enabled */
bool cmdq_support; /* Command Queue supported */
unsigned int cmdq_depth; /* Command Queue depth */
#define MMC_FIRMWARE_LEN 8
u8 fwrev[MMC_FIRMWARE_LEN]; /* FW version */
u8 raw_exception_status; /* 54 */
u8 raw_partition_support; /* 160 */
u8 raw_rpmb_size_mult; /* 168 */
u8 boot_wp_status; /* 174 */
u8 raw_erased_mem_count; /* 181 */
u8 strobe_support; /* 184 */
u8 raw_ext_csd_structure; /* 194 */
u8 raw_card_type; /* 196 */
u8 raw_driver_strength; /* 197 */
u8 out_of_int_time; /* 198 */
u8 raw_pwr_cl_52_195; /* 200 */
u8 raw_pwr_cl_26_195; /* 201 */
u8 raw_pwr_cl_52_360; /* 202 */
u8 raw_pwr_cl_26_360; /* 203 */
u8 raw_s_a_timeout; /* 217 */
u8 raw_hc_erase_gap_size; /* 221 */
u8 raw_erase_timeout_mult; /* 223 */
u8 raw_hc_erase_grp_size; /* 224 */
u8 raw_sec_trim_mult; /* 229 */
u8 raw_sec_erase_mult; /* 230 */
u8 raw_sec_feature_support;/* 231 */
u8 raw_trim_mult; /* 232 */
u8 raw_pwr_cl_200_195; /* 236 */
u8 raw_pwr_cl_200_360; /* 237 */
u8 raw_pwr_cl_ddr_52_195; /* 238 */
u8 raw_pwr_cl_ddr_52_360; /* 239 */
u8 raw_pwr_cl_ddr_200_360; /* 253 */
u8 raw_bkops_status; /* 246 */
u8 raw_sectors[4]; /* 212 - 4 bytes */
u8 pre_eol_info; /* 267 */
u8 device_life_time_est_typ_a; /* 268 */
u8 device_life_time_est_typ_b; /* 269 */
unsigned int feature_support;
#define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */
};
struct sd_scr {
unsigned char sda_vsn;
unsigned char sda_spec3;
unsigned char bus_widths;
#define SD_SCR_BUS_WIDTH_1 (1<<0)
#define SD_SCR_BUS_WIDTH_4 (1<<2)
unsigned char cmds;
#define SD_SCR_CMD20_SUPPORT (1<<0)
#define SD_SCR_CMD23_SUPPORT (1<<1)
};
struct sd_ssr {
unsigned int au; /* In sectors */
unsigned int erase_timeout; /* In milliseconds */
unsigned int erase_offset; /* In milliseconds */
};
struct sd_switch_caps {
unsigned int hs_max_dtr;
unsigned int uhs_max_dtr;
#define HIGH_SPEED_MAX_DTR 50000000
#define UHS_SDR104_MAX_DTR 208000000
#define UHS_SDR50_MAX_DTR 100000000
#define UHS_DDR50_MAX_DTR 50000000
#define UHS_SDR25_MAX_DTR UHS_DDR50_MAX_DTR
#define UHS_SDR12_MAX_DTR 25000000
#define DEFAULT_SPEED_MAX_DTR UHS_SDR12_MAX_DTR
unsigned int sd3_bus_mode;
#define UHS_SDR12_BUS_SPEED 0
#define HIGH_SPEED_BUS_SPEED 1
#define UHS_SDR25_BUS_SPEED 1
#define UHS_SDR50_BUS_SPEED 2
#define UHS_SDR104_BUS_SPEED 3
#define UHS_DDR50_BUS_SPEED 4
#define SD_MODE_HIGH_SPEED (1 << HIGH_SPEED_BUS_SPEED)
#define SD_MODE_UHS_SDR12 (1 << UHS_SDR12_BUS_SPEED)
#define SD_MODE_UHS_SDR25 (1 << UHS_SDR25_BUS_SPEED)
#define SD_MODE_UHS_SDR50 (1 << UHS_SDR50_BUS_SPEED)
#define SD_MODE_UHS_SDR104 (1 << UHS_SDR104_BUS_SPEED)
#define SD_MODE_UHS_DDR50 (1 << UHS_DDR50_BUS_SPEED)
unsigned int sd3_drv_type;
#define SD_DRIVER_TYPE_B 0x01
#define SD_DRIVER_TYPE_A 0x02
#define SD_DRIVER_TYPE_C 0x04
#define SD_DRIVER_TYPE_D 0x08
unsigned int sd3_curr_limit;
#define SD_SET_CURRENT_LIMIT_200 0
#define SD_SET_CURRENT_LIMIT_400 1
#define SD_SET_CURRENT_LIMIT_600 2
#define SD_SET_CURRENT_LIMIT_800 3
#define SD_SET_CURRENT_NO_CHANGE (-1)
#define SD_MAX_CURRENT_200 (1 << SD_SET_CURRENT_LIMIT_200)
#define SD_MAX_CURRENT_400 (1 << SD_SET_CURRENT_LIMIT_400)
#define SD_MAX_CURRENT_600 (1 << SD_SET_CURRENT_LIMIT_600)
#define SD_MAX_CURRENT_800 (1 << SD_SET_CURRENT_LIMIT_800)
};
struct sdio_cccr {
unsigned int sdio_vsn;
unsigned int sd_vsn;
unsigned int multi_block:1,
low_speed:1,
wide_bus:1,
high_power:1,
high_speed:1,
disable_cd:1,
sai:1,
eai:1;
};
struct sdio_cis {
unsigned short vendor;
unsigned short device;
unsigned short blksize;
unsigned int max_dtr;
};
struct mmc_host;
struct sdio_func;
struct sdio_func_tuple;
struct mmc_queue_req;
#define SDIO_MAX_FUNCS 7
/* The number of MMC physical partitions. These consist of:
* boot partitions (2), general purpose partitions (4) and
* RPMB partition (1) in MMC v4.4.
*/
#define MMC_NUM_BOOT_PARTITION 2
#define MMC_NUM_GP_PARTITION 4
#define MMC_NUM_PHY_PARTITION 7
#define MAX_MMC_PART_NAME_LEN 20
/*
* MMC Physical partitions
*/
struct mmc_part {
u64 size; /* partition size (in bytes) */
unsigned int part_cfg; /* partition type */
char name[MAX_MMC_PART_NAME_LEN];
bool force_ro; /* to make boot parts RO by default */
unsigned int area_type;
#define MMC_BLK_DATA_AREA_MAIN (1<<0)
#define MMC_BLK_DATA_AREA_BOOT (1<<1)
#define MMC_BLK_DATA_AREA_GP (1<<2)
#define MMC_BLK_DATA_AREA_RPMB (1<<3)
};
/*
* MMC device
*/
struct mmc_card {
struct mmc_host *host; /* the host this device belongs to */
struct device dev; /* the device */
u32 ocr; /* the current OCR setting */
unsigned int rca; /* relative card address of device */
unsigned int type; /* card type */
#define MMC_TYPE_MMC 0 /* MMC card */
#define MMC_TYPE_SD 1 /* SD card */
#define MMC_TYPE_SDIO 2 /* SDIO card */
#define MMC_TYPE_SD_COMBO 3 /* SD combo (IO+mem) card */
unsigned int state; /* (our) card state */
unsigned int quirks; /* card quirks */
unsigned int quirk_max_rate; /* max rate set by quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
/* for byte mode */
#define MMC_QUIRK_NONSTD_SDIO (1<<2) /* non-standard SDIO card attached */
/* (missing CIA registers) */
#define MMC_QUIRK_NONSTD_FUNC_IF (1<<4) /* SDIO card has nonstd function interfaces */
#define MMC_QUIRK_DISABLE_CD (1<<5) /* disconnect CD/DAT[3] resistor */
#define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
/* byte mode */
#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */
#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */
#define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx could create a fake interrupt */
#define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
bool reenable_cmdq; /* Re-enable Command Queue */
unsigned int erase_size; /* erase size in sectors */
unsigned int erase_shift; /* if erase unit is power 2 */
unsigned int pref_erase; /* in sectors */
unsigned int eg_boundary; /* don't cross erase-group boundaries */
u8 erased_byte; /* value of erased bytes */
unsigned int wp_grp_size; /* write group size in sectors */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
u32 raw_scr[2]; /* raw card SCR */
u32 raw_ssr[16]; /* raw card SSR */
struct mmc_cid cid; /* card identification */
struct mmc_csd csd; /* card specific */
struct mmc_ext_csd ext_csd; /* mmc v4 extended card specific */
struct sd_scr scr; /* extra SD information */
struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
unsigned int sdio_funcs; /* number of SDIO functions */
struct sdio_cccr cccr; /* common card info */
struct sdio_cis cis; /* common tuple info */
struct sdio_func *sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
struct sdio_func *sdio_single_irq; /* SDIO function when only one IRQ active */
unsigned num_info; /* number of info strings */
const char **info; /* info strings */
struct sdio_func_tuple *tuples; /* unknown common tuples */
unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */
unsigned int mmc_avail_type; /* supported device type by both host and card */
unsigned int drive_strength; /* for UHS-I, HS200 or HS400 */
struct dentry *debugfs_root;
struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
unsigned int nr_parts;
#ifdef CONFIG_MTK_EMMC_HW_CQ
unsigned int part_curr;
bool cqe_init;
#endif
unsigned int bouncesz; /* Bounce buffer size */
struct workqueue_struct *complete_wq; /* Private workqueue */
};
static inline bool mmc_large_sector(struct mmc_card *card)
{
return card->ext_csd.data_sector_size == 4096;
}
bool mmc_card_is_blockaddr(struct mmc_card *card);
#define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
#define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD)
#define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO)
#endif /* LINUX_MMC_CARD_H */
include/linux/mmc/core.h
+210
View File
@@ -0,0 +1,210 @@
/*
* linux/include/linux/mmc/core.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_MMC_CORE_H
#define LINUX_MMC_CORE_H
#include <linux/completion.h>
#include <linux/types.h>
struct mmc_data;
struct mmc_request;
enum mmc_blk_status {
MMC_BLK_SUCCESS = 0,
MMC_BLK_PARTIAL,
MMC_BLK_CMD_ERR,
MMC_BLK_RETRY,
MMC_BLK_ABORT,
MMC_BLK_DATA_ERR,
MMC_BLK_ECC_ERR,
MMC_BLK_NOMEDIUM,
MMC_BLK_NEW_REQUEST,
};
struct mmc_command {
u32 opcode;
u32 arg;
#define MMC_CMD23_ARG_REL_WR (1 << 31)
#define MMC_CMD23_ARG_PACKED ((0 << 31) | (1 << 30))
#define MMC_CMD23_ARG_TAG_REQ (1 << 29)
u32 resp[4];
unsigned int flags; /* expected response type */
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
/*
* These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
/* Can be used by core to poll after switch to MMC HS mode */
#define MMC_RSP_R1_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
/*
* These are the SPI response types for MMC, SD, and SDIO cards.
* Commands return R1, with maybe more info. Zero is an error type;
* callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
*/
#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
/*
* These are the command types.
*/
#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
unsigned int retries; /* max number of retries */
int error; /* command error */
/*
* Standard errno values are used for errors, but some have specific
* meaning in the MMC layer:
*
* ETIMEDOUT Card took too long to respond
* EILSEQ Basic format problem with the received or sent data
* (e.g. CRC check failed, incorrect opcode in response
* or bad end bit)
* EINVAL Request cannot be performed because of restrictions
* in hardware and/or the driver
* ENOMEDIUM Host can determine that the slot is empty and is
* actively failing requests
*/
unsigned int busy_timeout; /* busy detect timeout in ms */
/* Set this flag only for blocking sanitize request */
bool sanitize_busy;
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int blk_addr; /* block address */
int error; /* data error */
unsigned int flags;
#define MMC_DATA_WRITE BIT(8)
#define MMC_DATA_READ BIT(9)
/* Extra flags used by CQE */
#define MMC_DATA_QBR BIT(10) /* CQE queue barrier*/
#define MMC_DATA_PRIO BIT(11) /* CQE high priority */
#define MMC_DATA_REL_WR BIT(12) /* Reliable write */
#define MMC_DATA_DAT_TAG BIT(13) /* Tag request */
#define MMC_DATA_FORCED_PRG BIT(14) /* Forced programming */
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
int sg_count; /* mapped sg entries */
struct scatterlist *sg; /* I/O scatter list */
s32 host_cookie; /* host private data */
};
struct mmc_host;
struct mmc_request {
struct mmc_command *sbc; /* SET_BLOCK_COUNT for multiblock */
struct mmc_command *cmd;
struct mmc_data *data;
struct mmc_command *stop;
#ifdef CONFIG_MTK_EMMC_CQ_SUPPORT
struct mmc_async_req *areq;
int flags;
struct list_head link;
struct list_head hlist;
#endif
struct request *req;
#if defined(CONFIG_MTK_HW_FDE) || defined(CONFIG_MMC_CRYPTO)
bool is_mmc_req; /* request is from mmc layer */
#endif
struct completion completion;
struct completion cmd_completion;
void (*done)(struct mmc_request *);/* completion function */
/*
* Notify uppers layers (e.g. mmc block driver) that recovery is needed
* due to an error associated with the mmc_request. Currently used only
* by CQE.
*/
void (*recovery_notifier)(struct mmc_request *);
struct mmc_host *host;
/* Allow other commands during this ongoing data transfer or busy wait */
bool cap_cmd_during_tfr;
int tag;
#ifdef CONFIG_MMC_CRYPTO
int crypto_key_slot;
u64 data_unit_num;
const struct blk_crypto_key *crypto_key;
#endif
};
#ifdef CONFIG_MMC_CRYPTO
static inline bool mmc_request_crypto_enabled(const struct mmc_request *mrq)
{
return mrq->crypto_key != NULL;
}
#else
static inline bool mmc_request_crypto_enabled(const struct mmc_request *mrq)
{
return false;
}
#endif
struct mmc_card;
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq);
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
int retries);
int mmc_hw_reset(struct mmc_host *host);
int mmc_sw_reset(struct mmc_host *host);
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
#endif /* LINUX_MMC_CORE_H */
include/linux/mmc/host.h
+739
View File
@@ -0,0 +1,739 @@
/*
* linux/include/linux/mmc/host.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Host driver specific definitions.
*/
#ifndef LINUX_MMC_HOST_H
#define LINUX_MMC_HOST_H
#include <linux/sched.h>
#include <linux/device.h>
#include <linux/fault-inject.h>
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/mmc/pm.h>
#include <linux/dma-direction.h>
struct mmc_ios {
unsigned int clock; /* clock rate */
unsigned short vdd;
unsigned int power_delay_ms; /* waiting for stable power */
/* vdd stores the bit number of the selected voltage range from below. */
unsigned char bus_mode; /* command output mode */
#define MMC_BUSMODE_OPENDRAIN 1
#define MMC_BUSMODE_PUSHPULL 2
unsigned char chip_select; /* SPI chip select */
#define MMC_CS_DONTCARE 0
#define MMC_CS_HIGH 1
#define MMC_CS_LOW 2
unsigned char power_mode; /* power supply mode */
#define MMC_POWER_OFF 0
#define MMC_POWER_UP 1
#define MMC_POWER_ON 2
#define MMC_POWER_UNDEFINED 3
unsigned char bus_width; /* data bus width */
#define MMC_BUS_WIDTH_1 0
#define MMC_BUS_WIDTH_4 2
#define MMC_BUS_WIDTH_8 3
unsigned char timing; /* timing specification used */
#define MMC_TIMING_LEGACY 0
#define MMC_TIMING_MMC_HS 1
#define MMC_TIMING_SD_HS 2
#define MMC_TIMING_UHS_SDR12 3
#define MMC_TIMING_UHS_SDR25 4
#define MMC_TIMING_UHS_SDR50 5
#define MMC_TIMING_UHS_SDR104 6
#define MMC_TIMING_UHS_DDR50 7
#define MMC_TIMING_MMC_DDR52 8
#define MMC_TIMING_MMC_HS200 9
#define MMC_TIMING_MMC_HS400 10
unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */
#define MMC_SIGNAL_VOLTAGE_330 0
#define MMC_SIGNAL_VOLTAGE_180 1
#define MMC_SIGNAL_VOLTAGE_120 2
unsigned char drv_type; /* driver type (A, B, C, D) */
#define MMC_SET_DRIVER_TYPE_B 0
#define MMC_SET_DRIVER_TYPE_A 1
#define MMC_SET_DRIVER_TYPE_C 2
#define MMC_SET_DRIVER_TYPE_D 3
bool enhanced_strobe; /* hs400es selection */
};
struct mmc_host;
struct mmc_host_ops {
/*
* It is optional for the host to implement pre_req and post_req in
* order to support double buffering of requests (prepare one
* request while another request is active).
* pre_req() must always be followed by a post_req().
* To undo a call made to pre_req(), call post_req() with
* a nonzero err condition.
*/
void (*post_req)(struct mmc_host *host, struct mmc_request *req,
int err);
void (*pre_req)(struct mmc_host *host, struct mmc_request *req);
void (*request)(struct mmc_host *host, struct mmc_request *req);
/*
* Avoid calling the next three functions too often or in a "fast
* path", since underlaying controller might implement them in an
* expensive and/or slow way. Also note that these functions might
* sleep, so don't call them in the atomic contexts!
*/
/*
* Notes to the set_ios callback:
* ios->clock might be 0. For some controllers, setting 0Hz
* as any other frequency works. However, some controllers
* explicitly need to disable the clock. Otherwise e.g. voltage
* switching might fail because the SDCLK is not really quiet.
*/
void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
/*
* Return values for the get_ro callback should be:
* 0 for a read/write card
* 1 for a read-only card
* -ENOSYS when not supported (equal to NULL callback)
* or a negative errno value when something bad happened
*/
int (*get_ro)(struct mmc_host *host);
/*
* Return values for the get_cd callback should be:
* 0 for a absent card
* 1 for a present card
* -ENOSYS when not supported (equal to NULL callback)
* or a negative errno value when something bad happened
*/
int (*get_cd)(struct mmc_host *host);
void (*enable_sdio_irq)(struct mmc_host *host, int enable);
void (*ack_sdio_irq)(struct mmc_host *host);
/* optional callback for HC quirks */
void (*init_card)(struct mmc_host *host, struct mmc_card *card);
int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
/* Check if the card is pulling dat[0:3] low */
int (*card_busy)(struct mmc_host *host);
/* The tuning command opcode value is different for SD and eMMC cards */
int (*execute_tuning)(struct mmc_host *host, u32 opcode);
/* Prepare HS400 target operating frequency depending host driver */
int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
/* Execute HS400 tuning depending host driver */
int (*execute_hs400_tuning)(struct mmc_host *host, struct mmc_card *card);
/* Prepare for switching from HS400 to HS200 */
void (*hs400_downgrade)(struct mmc_host *host);
/* Complete selection of HS400 */
void (*hs400_complete)(struct mmc_host *host);
/* Prepare enhanced strobe depending host driver */
void (*hs400_enhanced_strobe)(struct mmc_host *host,
struct mmc_ios *ios);
int (*select_drive_strength)(struct mmc_card *card,
unsigned int max_dtr, int host_drv,
int card_drv, int *drv_type);
void (*hw_reset)(struct mmc_host *host);
void (*card_event)(struct mmc_host *host);
void (*remove_bad_sdcard)(struct mmc_host *host);
/*
* Optional callback to support controllers with HW issues for multiple
* I/O. Returns the number of supported blocks for the request.
*/
int (*multi_io_quirk)(struct mmc_card *card,
unsigned int direction, int blk_size);
};
struct mmc_cqe_ops {
/* Allocate resources, and make the CQE operational */
int (*cqe_enable)(struct mmc_host *host, struct mmc_card *card);
/* Free resources, and make the CQE non-operational */
void (*cqe_disable)(struct mmc_host *host);
/*
* Issue a read, write or DCMD request to the CQE. Also deal with the
* effect of ->cqe_off().
*/
int (*cqe_request)(struct mmc_host *host, struct mmc_request *mrq);
/* Free resources (e.g. DMA mapping) associated with the request */
void (*cqe_post_req)(struct mmc_host *host, struct mmc_request *mrq);
/*
* Prepare the CQE and host controller to accept non-CQ commands. There
* is no corresponding ->cqe_on(), instead ->cqe_request() is required
* to deal with that.
*/
void (*cqe_off)(struct mmc_host *host);
/*
* Wait for all CQE tasks to complete. Return an error if recovery
* becomes necessary.
*/
int (*cqe_wait_for_idle)(struct mmc_host *host);
/*
* Notify CQE that a request has timed out. Return false if the request
* completed or true if a timeout happened in which case indicate if
* recovery is needed.
*/
bool (*cqe_timeout)(struct mmc_host *host, struct mmc_request *mrq,
bool *recovery_needed);
/*
* Stop all CQE activity and prepare the CQE and host controller to
* accept recovery commands.
*/
void (*cqe_recovery_start)(struct mmc_host *host);
/*
* Clear the queue and call mmc_cqe_request_done() on all requests.
* Requests that errored will have the error set on the mmc_request
* (data->error or cmd->error for DCMD). Requests that did not error
* will have zero data bytes transferred.
*/
void (*cqe_recovery_finish)(struct mmc_host *host);
};
struct keyslot_mgmt_ll_ops;
struct mmc_crypto_variant_ops {
void (*host_init_crypto)(struct mmc_host *host);
int (*get_crypto_capabilities)(struct mmc_host *host);
int (*prepare_mqr_crypto)(struct mmc_host *host,
u64 data_unit_num, int ddir, int tag, int slot);
void (*host_program_key)(struct mmc_host *host,
u32 *key, u32 *tkey, u32 config);
int (*complete_mqr_crypto)(struct mmc_host *host);
};
struct mmc_async_req {
/* active mmc request */
struct mmc_request *mrq;
#ifdef CONFIG_MTK_EMMC_CQ_SUPPORT
struct mmc_request *mrq_que;
#endif
/*
* Check error status of completed mmc request.
* Returns 0 if success otherwise non zero.
*/
enum mmc_blk_status (*err_check)(struct mmc_card *, struct mmc_async_req *);
};
/**
* struct mmc_slot - MMC slot functions
*
* @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL
* @handler_priv: MMC/SD-card slot context
*
* Some MMC/SD host controllers implement slot-functions like card and
* write-protect detection natively. However, a large number of controllers
* leave these functions to the CPU. This struct provides a hook to attach
* such slot-function drivers.
*/
struct mmc_slot {
int cd_irq;
bool cd_wake_enabled;
void *handler_priv;
};
/**
* mmc_context_info - synchronization details for mmc context
* @is_done_rcv wake up reason was done request
* @is_new_req wake up reason was new request
* @is_waiting_last_req mmc context waiting for single running request
* @wait wait queue
*/
struct mmc_context_info {
bool is_done_rcv;
bool is_new_req;
bool is_waiting_last_req;
wait_queue_head_t wait;
};
#ifdef CONFIG_MTK_EMMC_CQ_SUPPORT
#define EMMC_MAX_QUEUE_DEPTH (32)
#define EMMC_MIN_RT_CLASS_TAG_COUNT (4)
#endif
struct regulator;
struct mmc_pwrseq;
struct mmc_supply {
struct regulator *vmmc; /* Card power supply */
struct regulator *vqmmc; /* Optional Vccq supply */
};
struct mmc_ctx {
struct task_struct *task;
};
/* CCAP - Crypto Capability 100h */
union swcqhci_crypto_capabilities {
__le32 reg_val;
struct {
u8 num_crypto_cap;
u8 config_count;
u8 reserved;
u8 config_array_ptr;
};
};
enum swcqhci_crypto_key_size {
SWCQHCI_CRYPTO_KEY_SIZE_128 = 0,
SWCQHCI_CRYPTO_KEY_SIZE_192 = 1,
SWCQHCI_CRYPTO_KEY_SIZE_256 = 2,
SWCQHCI_CRYPTO_KEY_SIZE_512 = 3,
SWCQHCI_CRYPTO_KEY_SIZE_INVALID = 4,
};
enum swcqhci_crypto_alg {
SWCQHCI_CRYPTO_ALG_AES_XTS = 4,
SWCQHCI_CRYPTO_ALG_BITLOCKER_AES_CBC = 3,
SWCQHCI_CRYPTO_ALG_AES_ECB = 2,
SWCQHCI_CRYPTO_ALG_ESSIV_AES_CBC = 1,
SWCQHCI_CRYPTO_ALG_INVALID = 0,
};
/* x-CRYPTOCAP - Crypto Capability X */
union swcqhci_crypto_cap_entry {
__le32 reg_val;
struct {
u8 algorithm_id;
u8 sdus_mask; /* Supported data unit size mask */
u8 key_size;
u8 reserved;
};
};
/* Please note that enable bit @ bit15 for spec */
#define MMC_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
#define MMC_CRYPTO_KEY_MAX_SIZE 64
/* x-CRYPTOCFG - Crypto Configuration X */
/* key info will be fill in here, find slot will use, # of array == # of slot */
union swcqhci_crypto_cfg_entry {
__le32 reg_val[32];
struct {
u8 crypto_key[MMC_CRYPTO_KEY_MAX_SIZE];
/* 4KB/512 = 8 */
u8 data_unit_size;
u8 crypto_cap_idx;
u8 reserved_1;
u8 config_enable;
u8 reserved_multi_host;
u8 reserved_2;
u8 vsb[2];
u8 reserved_3[56];
};
};
struct mmc_host {
struct device *parent;
struct device class_dev;
int index;
int host_function; /* define host function */
const struct mmc_host_ops *ops;
struct mmc_pwrseq *pwrseq;
unsigned int f_min;
unsigned int f_max;
unsigned int f_init;
u32 ocr_avail;
u32 ocr_avail_sdio; /* SDIO-specific OCR */
u32 ocr_avail_sd; /* SD-specific OCR */
u32 ocr_avail_mmc; /* MMC-specific OCR */
#ifdef CONFIG_PM_SLEEP
struct notifier_block pm_notify;
#endif
u32 max_current_330;
u32 max_current_300;
u32 max_current_180;
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
#define MMC_VDD_EMMC (MMC_VDD_165_195 |MMC_VDD_20_21| \
MMC_VDD_21_22|MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25| \
MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28| \
MMC_VDD_28_29 | MMC_VDD_29_30)
#define MMC_VDD_SD (MMC_VDD_28_29 | MMC_VDD_29_30)
u32 caps; /* Host capabilities */
#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */
#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */
#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */
#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */
#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */
#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */
#define MMC_CAP_AGGRESSIVE_PM (1 << 7) /* Suspend (e)MMC/SD at idle */
#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */
#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */
#define MMC_CAP_3_3V_DDR (1 << 11) /* Host supports eMMC DDR 3.3V */
#define MMC_CAP_1_8V_DDR (1 << 12) /* Host supports eMMC DDR 1.8V */
#define MMC_CAP_1_2V_DDR (1 << 13) /* Host supports eMMC DDR 1.2V */
#define MMC_CAP_POWER_OFF_CARD (1 << 14) /* Can power off after boot */
#define MMC_CAP_BUS_WIDTH_TEST (1 << 15) /* CMD14/CMD19 bus width ok */
#define MMC_CAP_UHS_SDR12 (1 << 16) /* Host supports UHS SDR12 mode */
#define MMC_CAP_UHS_SDR25 (1 << 17) /* Host supports UHS SDR25 mode */
#define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */
#define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */
#define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */
#define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \
MMC_CAP_UHS_DDR50)
/* (1 << 21) is free for reuse */
#define MMC_CAP_NEED_RSP_BUSY (1 << 22) /* Commands with R1B can't use R1. */
#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
#define MMC_CAP_DONE_COMPLETE (1 << 27) /* RW reqs can be completed within mmc_request_done() */
#define MMC_CAP_CD_WAKE (1 << 28) /* Enable card detect wake */
#define MMC_CAP_CMD_DURING_TFR (1 << 29) /* Commands during data transfer */
#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */
#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */
u32 caps2; /* More host capabilities */
#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */
#define MMC_CAP2_FULL_PWR_CYCLE (1 << 2) /* Can do full power cycle */
#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */
#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */
#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_HSX00_1_8V (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V)
#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */
#define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */
#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */
#define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */
#define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */
#define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */
#define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */
#define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */
#define MMC_CAP2_NMCARD (1 << 26)
#define MMC_CAP2_CRYPTO (1 << 27) /* Host supports inline encryption */
#define MMC_CAP2_SWCQ (1 << 30) /* CAP_SW_CMDQ */
int fixed_drv_type; /* fixed driver type for non-removable media */
mmc_pm_flag_t pm_caps; /* supported pm features */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
unsigned short max_segs; /* see blk_queue_max_segments */
unsigned short unused;
unsigned int max_req_size; /* maximum number of bytes in one req */
unsigned int max_blk_size; /* maximum size of one mmc block */
unsigned int max_blk_count; /* maximum number of blocks in one req */
unsigned int max_busy_timeout; /* max busy timeout in ms */
/* private data */
spinlock_t lock; /* lock for claim and bus ops */
struct mmc_ios ios; /* current io bus settings */
/* group bitfields together to minimize padding */
unsigned int use_spi_crc:1;
unsigned int claimed:1; /* host exclusively claimed */
unsigned int bus_dead:1; /* bus has been released */
unsigned int can_retune:1; /* re-tuning can be used */
unsigned int doing_retune:1; /* re-tuning in progress */
unsigned int retune_now:1; /* do re-tuning at next req */
unsigned int retune_paused:1; /* re-tuning is temporarily disabled */
unsigned int use_blk_mq:1; /* use blk-mq */
unsigned int retune_crc_disable:1; /* don't trigger retune upon crc */
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable devices */
int need_retune; /* re-tuning is needed */
int hold_retune; /* hold off re-tuning */
unsigned int retune_period; /* re-tuning period in secs */
struct timer_list retune_timer; /* for periodic re-tuning */
bool trigger_card_event; /* card_event necessary */
struct mmc_card *card; /* device attached to this host */
wait_queue_head_t wq;
struct mmc_ctx *claimer; /* context that has host claimed */
int claim_cnt; /* "claim" nesting count */
struct mmc_ctx default_ctx; /* default context */
struct delayed_work detect;
int detect_change; /* card detect flag */
struct mmc_slot slot;
const struct mmc_bus_ops *bus_ops; /* current bus driver */
unsigned int bus_refs; /* reference counter */
unsigned int sdio_irqs;
struct task_struct *sdio_irq_thread;
struct delayed_work sdio_irq_work;
bool sdio_irq_pending;
atomic_t sdio_irq_thread_abort;
mmc_pm_flag_t pm_flags; /* requested pm features */
struct led_trigger *led; /* activity led */
#ifdef CONFIG_REGULATOR
bool regulator_enabled; /* regulator state */
#endif
struct mmc_supply supply;
struct dentry *debugfs_root;
/* Ongoing data transfer that allows commands during transfer */
struct mmc_request *ongoing_mrq;
#ifdef CONFIG_MTK_EMMC_CQ_SUPPORT
struct mmc_async_req *areq_que[EMMC_MAX_QUEUE_DEPTH];
struct mmc_async_req *areq_cur;
atomic_t areq_cnt;
spinlock_t cmd_que_lock;
spinlock_t dat_que_lock;
spinlock_t que_lock;
struct list_head cmd_que;
struct list_head dat_que;
unsigned long state;
wait_queue_head_t cmp_que;
wait_queue_head_t cmdq_que;
struct mmc_request *done_mrq;
struct mmc_command chk_cmd;
struct mmc_request chk_mrq;
struct mmc_command que_cmd;
struct mmc_request que_mrq;
struct mmc_command deq_cmd;
struct mmc_request deq_mrq;
struct mmc_queue_req *mqrq_cur;
struct mmc_queue_req *mqrq_prev;
struct mmc_request *prev_mrq;
struct task_struct *cmdq_thread;
atomic_t cq_rw;
atomic_t cq_w;
unsigned int wp_error;
atomic_t cq_wait_rdy;
atomic_t cq_rdy_cnt;
unsigned long task_id_index;
int cur_rw_task;
#define CQ_TASK_IDLE 99
atomic_t is_data_dma;
atomic_t cq_tuning_now;
unsigned int data_mrq_queued[EMMC_MAX_QUEUE_DEPTH];
unsigned int cmdq_support_changed;
int align_size;
bool swcq_enabled;
#endif
#ifdef CONFIG_FAIL_MMC_REQUEST
struct fault_attr fail_mmc_request;
#endif
unsigned int actual_clock; /* Actual HC clock rate */
unsigned int slotno; /* used for sdio acpi binding */
int dsr_req; /* DSR value is valid */
u32 dsr; /* optional driver stage (DSR) value */
/* Command Queue Engine (CQE) support */
const struct mmc_cqe_ops *cqe_ops;
void *cqe_private;
int cqe_qdepth;
bool cqe_enabled;
bool cqe_on;
#ifdef CONFIG_MMC_CRYPTO
/* crypto */
const struct mmc_crypto_variant_ops *crypto_vops;
union swcqhci_crypto_capabilities crypto_capabilities;
union swcqhci_crypto_cap_entry *crypto_cap_array;
u8 crypto_cfg_register;
union swcqhci_crypto_cfg_entry *crypto_cfgs;
struct keyslot_manager *ksm;
#endif /* CONFIG_MMC_CRYPTO */
unsigned long private[0] ____cacheline_aligned;
};
struct device_node;
struct mmc_host *mmc_alloc_host(int extra, struct device *);
int mmc_add_host(struct mmc_host *);
void mmc_remove_host(struct mmc_host *);
void mmc_free_host(struct mmc_host *);
int mmc_of_parse(struct mmc_host *host);
int mmc_of_parse_voltage(struct device_node *np, u32 *mask);
static inline void *mmc_priv(struct mmc_host *host)
{
return (void *)host->private;
}
#define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI)
#define mmc_dev(x) ((x)->parent)
#define mmc_classdev(x) (&(x)->class_dev)
#define mmc_hostname(x) (dev_name(&(x)->class_dev))
void mmc_detect_change(struct mmc_host *, unsigned long delay);
void mmc_request_done(struct mmc_host *, struct mmc_request *);
void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq);
void mmc_cqe_request_done(struct mmc_host *host, struct mmc_request *mrq);
#ifdef CONFIG_MTK_EMMC_CQ_SUPPORT
int mmc_blk_end_queued_req(struct mmc_host *host,
struct mmc_async_req *areq_active, int index);
/* add for emmc reset when error happen */
extern int current_mmc_part_type;
extern int emmc_resetting_when_cmdq;
#endif
/*
* May be called from host driver's system/runtime suspend/resume callbacks,
* to know if SDIO IRQs has been claimed.
*/
static inline bool sdio_irq_claimed(struct mmc_host *host)
{
return host->sdio_irqs > 0;
}
static inline void mmc_signal_sdio_irq(struct mmc_host *host)
{
host->ops->enable_sdio_irq(host, 0);
host->sdio_irq_pending = true;
if (host->sdio_irq_thread)
wake_up_process(host->sdio_irq_thread);
}
void sdio_run_irqs(struct mmc_host *host);
void sdio_signal_irq(struct mmc_host *host);
#ifdef CONFIG_REGULATOR
int mmc_regulator_get_ocrmask(struct regulator *supply);
int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit);
int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios);
#else
static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
{
return 0;
}
static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
struct regulator *supply,
unsigned short vdd_bit)
{
return 0;
}
static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc,
struct mmc_ios *ios)
{
return -EINVAL;
}
#endif
u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
int mmc_regulator_get_supply(struct mmc_host *mmc);
static inline int mmc_card_is_removable(struct mmc_host *host)
{
return !(host->caps & MMC_CAP_NONREMOVABLE);
}
static inline int mmc_card_keep_power(struct mmc_host *host)
{
return host->pm_flags & MMC_PM_KEEP_POWER;
}
static inline int mmc_card_wake_sdio_irq(struct mmc_host *host)
{
return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ;
}
/* TODO: Move to private header */
static inline int mmc_card_hs(struct mmc_card *card)
{
return card->host->ios.timing == MMC_TIMING_SD_HS ||
card->host->ios.timing == MMC_TIMING_MMC_HS;
}
/* TODO: Move to private header */
static inline int mmc_card_uhs(struct mmc_card *card)
{
return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 &&
card->host->ios.timing <= MMC_TIMING_UHS_DDR50;
}
void mmc_retune_timer_stop(struct mmc_host *host);
static inline void mmc_retune_needed(struct mmc_host *host)
{
if (host->can_retune)
host->need_retune = 1;
}
static inline bool mmc_can_retune(struct mmc_host *host)
{
return host->can_retune == 1;
}
static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data)
{
return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
}
int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error);
int mmc_abort_tuning(struct mmc_host *host, u32 opcode);
int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
#endif /* LINUX_MMC_HOST_H */
include/linux/mmc/mmc.h
+442
View File
@@ -0,0 +1,442 @@
/*
* Header for MultiMediaCard (MMC)
*
* Copyright 2002 Hewlett-Packard Company
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Many thanks to Alessandro Rubini and Jonathan Corbet!
*
* Based strongly on code by:
*
* Author: Yong-iL Joh <tolkien@mizi.com>
*
* Author: Andrew Christian
* 15 May 2002
*/
#ifndef LINUX_MMC_MMC_H
#define LINUX_MMC_MMC_H
#include <linux/types.h>
/* Standard MMC commands (4.1) type argument response */
/* class 1 */
#define MMC_GO_IDLE_STATE 0 /* bc */
#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
#define MMC_BUS_TEST_R 14 /* adtc R1 */
#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
#define MMC_BUS_TEST_W 19 /* adtc R1 */
#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
/* class 2 */
#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
/* class 3 */
#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
/* class 4 */
#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
#define MMC_PROGRAM_CID 26 /* adtc R1 */
#define MMC_PROGRAM_CSD 27 /* adtc R1 */
/* class 6 */
#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
#define MMC_SEND_WRITE_PROT_TYPE 31 /* adtc [31:0] wpdata addr R1 */
/* class 5 */
#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
#define MMC_ERASE 38 /* ac R1b */
/* class 9 */
#define MMC_FAST_IO 39 /* ac <Complex> R4 */
#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
/* class 7 */
#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
/* class 8 */
#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
/* class 11 */
#define MMC_QUE_TASK_PARAMS 44 /* ac [20:16] task id R1 */
#define MMC_QUE_TASK_ADDR 45 /* ac [31:0] data addr R1 */
#define MMC_EXECUTE_READ_TASK 46 /* adtc [20:16] task id R1 */
#define MMC_EXECUTE_WRITE_TASK 47 /* adtc [20:16] task id R1 */
#define MMC_CMDQ_TASK_MGMT 48 /* ac [20:16] task id R1b */
static inline bool mmc_op_multi(u32 opcode)
{
return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
opcode == MMC_READ_MULTIPLE_BLOCK;
}
/*
* MMC_SWITCH argument format:
*
* [31:26] Always 0
* [25:24] Access Mode
* [23:16] Location of target Byte in EXT_CSD
* [15:08] Value Byte
* [07:03] Always 0
* [02:00] Command Set
*/
/*
MMC status in R1, for native mode (SPI bits are different)
Type
e : error bit
s : status bit
r : detected and set for the actual command response
x : detected and set during command execution. the host must poll
the card by sending status command in order to read these bits.
Clear condition
a : according to the card state
b : always related to the previous command. Reception of
a valid command will clear it (with a delay of one command)
c : clear by read
*/
#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
#define R1_ERASE_PARAM (1 << 27) /* ex, c */
#define R1_WP_VIOLATION (1 << 26) /* erx, c */
#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
#define R1_CC_ERROR (1 << 20) /* erx, c */
#define R1_ERROR (1 << 19) /* erx, c */
#define R1_UNDERRUN (1 << 18) /* ex, c */
#define R1_OVERRUN (1 << 17) /* ex, c */
#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
#define R1_ERASE_RESET (1 << 13) /* sr, c */
#define R1_STATUS(x) (x & 0xFFF9A000)
#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
#define R1_EXCEPTION_EVENT (1 << 6) /* sr, a */
#define R1_APP_CMD (1 << 5) /* sr, c */
#define R1_STATE_IDLE 0
#define R1_STATE_READY 1
#define R1_STATE_IDENT 2
#define R1_STATE_STBY 3
#define R1_STATE_TRAN 4
#define R1_STATE_DATA 5
#define R1_STATE_RCV 6
#define R1_STATE_PRG 7
#define R1_STATE_DIS 8
/*
* MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
* R1 is the low order byte; R2 is the next highest byte, when present.
*/
#define R1_SPI_IDLE (1 << 0)
#define R1_SPI_ERASE_RESET (1 << 1)
#define R1_SPI_ILLEGAL_COMMAND (1 << 2)
#define R1_SPI_COM_CRC (1 << 3)
#define R1_SPI_ERASE_SEQ (1 << 4)
#define R1_SPI_ADDRESS (1 << 5)
#define R1_SPI_PARAMETER (1 << 6)
/* R1 bit 7 is always zero */
#define R2_SPI_CARD_LOCKED (1 << 8)
#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
#define R2_SPI_ERROR (1 << 10)
#define R2_SPI_CC_ERROR (1 << 11)
#define R2_SPI_CARD_ECC_ERROR (1 << 12)
#define R2_SPI_WP_VIOLATION (1 << 13)
#define R2_SPI_ERASE_PARAM (1 << 14)
#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
/*
* OCR bits are mostly in host.h
*/
#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
/*
* Card Command Classes (CCC)
*/
#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
/* (and for SPI, CMD58,59) */
#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
/* (CMD11) */
#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
/* (CMD16,17,18) */
#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
/* (CMD20) */
#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
/* (CMD16,24,25,26,27) */
#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
/* (CMD32,33,34,35,36,37,38,39) */
#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
/* (CMD28,29,30) */
#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
/* (CMD16,CMD42) */
#define CCC_APP_SPEC (1<<8) /* (8) Application specific */
/* (CMD55,56,57,ACMD*) */
#define CCC_IO_MODE (1<<9) /* (9) I/O mode */
/* (CMD5,39,40,52,53) */
#define CCC_SWITCH (1<<10) /* (10) High speed switch */
/* (CMD6,34,35,36,37,50) */
/* (11) Reserved */
/* (CMD?) */
/*
* CSD field definitions
*/
#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */
#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */
#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */
/*
* EXT_CSD fields
*/
#define EXT_CSD_CMDQ_MODE_EN 15 /* R/W */
#define EXT_CSD_FLUSH_CACHE 32 /* W */
#define EXT_CSD_CACHE_CTRL 33 /* R/W */
#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
#define EXT_CSD_PACKED_FAILURE_INDEX 35 /* RO */
#define EXT_CSD_PACKED_CMD_STATUS 36 /* RO */
#define EXT_CSD_EXP_EVENTS_STATUS 54 /* RO, 2 bytes */
#define EXT_CSD_EXP_EVENTS_CTRL 56 /* R/W, 2 bytes */
#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
#define EXT_CSD_PARTITION_SETTING_COMPLETED 155 /* R/W */
#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
#define EXT_CSD_HPI_MGMT 161 /* R/W */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
#define EXT_CSD_BKOPS_EN 163 /* R/W */
#define EXT_CSD_BKOPS_START 164 /* W */
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_FW_CONFIG 169 /* R/W */
#define EXT_CSD_BOOT_WP 173 /* R/W */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_STROBE_SUPPORT 184 /* RO */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_POWER_CLASS 187 /* R/W */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_STRUCTURE 194 /* RO */
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_DRIVER_STRENGTH 197 /* RO */
#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */
#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
#define EXT_CSD_PWR_CL_52_195 200 /* RO */
#define EXT_CSD_PWR_CL_26_195 201 /* RO */
#define EXT_CSD_PWR_CL_52_360 202 /* RO */
#define EXT_CSD_PWR_CL_26_360 203 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
#define EXT_CSD_REL_WR_SEC_C 222 /* RO */
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
#define EXT_CSD_BOOT_MULT 226 /* RO */
#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
#define EXT_CSD_TRIM_MULT 232 /* RO */
#define EXT_CSD_PWR_CL_200_195 236 /* RO */
#define EXT_CSD_PWR_CL_200_360 237 /* RO */
#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
#define EXT_CSD_BKOPS_STATUS 246 /* RO */
#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
#define EXT_CSD_PRE_EOL_INFO 267 /* RO */
#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268 /* RO */
#define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269 /* RO */
#define EXT_CSD_CMDQ_DEPTH 307 /* RO */
#define EXT_CSD_CMDQ_SUPPORT 308 /* RO */
#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
#define EXT_CSD_MAX_PACKED_READS 501 /* RO */
#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
#define EXT_CSD_HPI_FEATURES 503 /* RO */
/*
* EXT_CSD field definitions
*/
#define EXT_CSD_WR_REL_PARAM_EN (1<<2)
#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40)
#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10)
#define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04)
#define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01)
#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3)
#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4)
#define EXT_CSD_PART_SETTING_COMPLETED (0x1)
#define EXT_CSD_PART_SUPPORT_PART_EN (0x1)
#define EXT_CSD_CMD_SET_NORMAL (1<<0)
#define EXT_CSD_CMD_SET_SECURE (1<<1)
#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
EXT_CSD_CARD_TYPE_HS_52)
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
/* DDR mode @1.8V or 3V I/O */
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
/* DDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
| EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
EXT_CSD_CARD_TYPE_HS200_1_2V)
#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */
#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */
#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */
#define EXT_CSD_TIMING_HS 1 /* High speed */
#define EXT_CSD_TIMING_HS200 2 /* HS200 */
#define EXT_CSD_TIMING_HS400 3 /* HS400 */
#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */
#define EXT_CSD_SEC_ER_EN BIT(0)
#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
#define EXT_CSD_SEC_GB_CL_EN BIT(4)
#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */
#define EXT_CSD_RST_N_EN_MASK 0x3
#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
#define EXT_CSD_NO_POWER_NOTIFICATION 0
#define EXT_CSD_POWER_ON 1
#define EXT_CSD_POWER_OFF_SHORT 2
#define EXT_CSD_POWER_OFF_LONG 3
#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
#define EXT_CSD_PWR_CL_8BIT_SHIFT 4
#define EXT_CSD_PWR_CL_4BIT_SHIFT 0
#define EXT_CSD_PACKED_EVENT_EN BIT(3)
/*
* EXCEPTION_EVENT_STATUS field
*/
#define EXT_CSD_URGENT_BKOPS BIT(0)
#define EXT_CSD_DYNCAP_NEEDED BIT(1)
#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2)
#define EXT_CSD_PACKED_FAILURE BIT(3)
#define EXT_CSD_PACKED_GENERIC_ERROR BIT(0)
#define EXT_CSD_PACKED_INDEXED_ERROR BIT(1)
/*
* BKOPS status level
*/
#define EXT_CSD_BKOPS_LEVEL_2 0x2
/*
* BKOPS modes
*/
#define EXT_CSD_MANUAL_BKOPS_MASK 0x01
#define EXT_CSD_AUTO_BKOPS_MASK 0x02
/*
* Command Queue
*/
#define EXT_CSD_CMDQ_MODE_ENABLED BIT(0)
#define EXT_CSD_CMDQ_DEPTH_MASK GENMASK(4, 0)
#define EXT_CSD_CMDQ_SUPPORTED BIT(0)
/*
* MMC_SWITCH access modes
*/
#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
/*
* Erase/trim/discard
*/
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
#define MMC_TRIM_ARG 0x00000001
#define MMC_DISCARD_ARG 0x00000003
#define MMC_SECURE_TRIM1_ARG 0x80000001
#define MMC_SECURE_TRIM2_ARG 0x80008000
#define MMC_SECURE_ARGS 0x80000000
#define MMC_TRIM_ARGS 0x00008001
#define mmc_driver_type_mask(n) (1 << (n))
#endif /* LINUX_MMC_MMC_H */
include/linux/mmc/pm.h
+31
View File
@@ -0,0 +1,31 @@
/*
* linux/include/linux/mmc/pm.h
*
* Author: Nicolas Pitre
* Copyright: (C) 2009 Marvell Technology Group Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_MMC_PM_H
#define LINUX_MMC_PM_H
/*
* These flags are used to describe power management features that
* some cards (typically SDIO cards) might wish to benefit from when
* the host system is being suspended. There are several layers of
* abstractions involved, from the host controller driver, to the MMC core
* code, to the SDIO core code, to finally get to the actual SDIO function
* driver. This file is therefore used for common definitions shared across
* all those layers.
*/
typedef unsigned int mmc_pm_flag_t;
#define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */
#define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */
#define MMC_PM_IGNORE_PM_NOTIFY (1 << 2) /* ignore mmc pm notify */
#endif /* LINUX_MMC_PM_H */
include/linux/mmc/sd.h
+94
View File
@@ -0,0 +1,94 @@
/*
* include/linux/mmc/sd.h
*
* Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef LINUX_MMC_SD_H
#define LINUX_MMC_SD_H
/* SD commands type argument response */
/* class 0 */
/* This is basically the same command as for MMC with some quirks. */
#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
#define SD_SWITCH_VOLTAGE 11 /* ac R1 */
/* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
/* class 5 */
#define SD_ERASE_WR_BLK_START 32 /* ac [31:0] data addr R1 */
#define SD_ERASE_WR_BLK_END 33 /* ac [31:0] data addr R1 */
/* Application commands */
#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
#define SD_APP_SD_STATUS 13 /* adtc R1 */
#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */
#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */
#define SD_APP_SEND_SCR 51 /* adtc R1 */
/* OCR bit definitions */
#define SD_OCR_S18R (1 << 24) /* 1.8V switching request */
#define SD_ROCR_S18A SD_OCR_S18R /* 1.8V switching accepted by card */
#define SD_OCR_XPC (1 << 28) /* SDXC power control */
#define SD_OCR_CCS (1 << 30) /* Card Capacity Status */
/*
* SD_SWITCH argument format:
*
* [31] Check (0) or switch (1)
* [30:24] Reserved (0)
* [23:20] Function group 6
* [19:16] Function group 5
* [15:12] Function group 4
* [11:8] Function group 3
* [7:4] Function group 2
* [3:0] Function group 1
*/
/*
* SD_SEND_IF_COND argument format:
*
* [31:12] Reserved (0)
* [11:8] Host Voltage Supply Flags
* [7:0] Check Pattern (0xAA)
*/
/*
* SCR field definitions
*/
#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */
#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */
#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00-3.0X */
/*
* SD bus widths
*/
#define SD_BUS_WIDTH_1 0
#define SD_BUS_WIDTH_4 2
/*
* SD_SWITCH mode
*/
#define SD_SWITCH_CHECK 0
#define SD_SWITCH_SET 1
/*
* SD_SWITCH function groups
*/
#define SD_SWITCH_GRP_ACCESS 0
/*
* SD_SWITCH access modes
*/
#define SD_SWITCH_ACCESS_DEF 0
#define SD_SWITCH_ACCESS_HS 1
#endif /* LINUX_MMC_SD_H */
include/linux/mmc/sdhci-pci-data.h
+18
View File
@@ -0,0 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
#define LINUX_MMC_SDHCI_PCI_DATA_H
struct pci_dev;
struct sdhci_pci_data {
struct pci_dev *pdev;
int slotno;
int rst_n_gpio; /* Set to -EINVAL if unused */
int cd_gpio; /* Set to -EINVAL if unused */
int (*setup)(struct sdhci_pci_data *data);
void (*cleanup)(struct sdhci_pci_data *data);
};
extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
int slotno);
#endif
include/linux/mmc/sdio.h
+197
View File
@@ -0,0 +1,197 @@
/*
* include/linux/mmc/sdio.h
*
* Copyright 2006-2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef LINUX_MMC_SDIO_H
#define LINUX_MMC_SDIO_H
/* SDIO commands type argument response */
#define SD_IO_SEND_OP_COND 5 /* bcr [23:0] OCR R4 */
#define SD_IO_RW_DIRECT 52 /* ac [31:0] See below R5 */
#define SD_IO_RW_EXTENDED 53 /* adtc [31:0] See below R5 */
#define SDIO_CCCR_INTERRUPT_EXT 0x16
#define SDIO_INTERRUPT_EXT_SAI (1 << 0)
#define SDIO_INTERRUPT_EXT_EAI (1 << 1)
/*
* SD_IO_RW_DIRECT argument format:
*
* [31] R/W flag
* [30:28] Function number
* [27] RAW flag
* [25:9] Register address
* [7:0] Data
*/
/*
* SD_IO_RW_EXTENDED argument format:
*
* [31] R/W flag
* [30:28] Function number
* [27] Block mode
* [26] Increment address
* [25:9] Register address
* [8:0] Byte/block count
*/
#define R4_18V_PRESENT (1<<24)
#define R4_MEMORY_PRESENT (1 << 27)
/*
SDIO status in R5
Type
e : error bit
s : status bit
r : detected and set for the actual command response
x : detected and set during command execution. the host must poll
the card by sending status command in order to read these bits.
Clear condition
a : according to the card state
b : always related to the previous command. Reception of
a valid command will clear it (with a delay of one command)
c : clear by read
*/
#define R5_COM_CRC_ERROR (1 << 15) /* er, b */
#define R5_ILLEGAL_COMMAND (1 << 14) /* er, b */
#define R5_ERROR (1 << 11) /* erx, c */
#define R5_FUNCTION_NUMBER (1 << 9) /* er, c */
#define R5_OUT_OF_RANGE (1 << 8) /* er, c */
#define R5_STATUS(x) (x & 0xCB00)
#define R5_IO_CURRENT_STATE(x) ((x & 0x3000) >> 12) /* s, b */
/*
* Card Common Control Registers (CCCR)
*/
#define SDIO_CCCR_CCCR 0x00
#define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */
#define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */
#define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */
#define SDIO_CCCR_REV_3_00 3 /* CCCR/FBR Version 3.00 */
#define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */
#define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */
#define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */
#define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */
#define SDIO_SDIO_REV_3_00 4 /* SDIO Spec Version 3.00 */
#define SDIO_CCCR_SD 0x01
#define SDIO_SD_REV_1_01 0 /* SD Physical Spec Version 1.01 */
#define SDIO_SD_REV_1_10 1 /* SD Physical Spec Version 1.10 */
#define SDIO_SD_REV_2_00 2 /* SD Physical Spec Version 2.00 */
#define SDIO_SD_REV_3_00 3 /* SD Physical Spev Version 3.00 */
#define SDIO_CCCR_IOEx 0x02
#define SDIO_CCCR_IORx 0x03
#define SDIO_CCCR_IENx 0x04 /* Function/Master Interrupt Enable */
#define SDIO_CCCR_INTx 0x05 /* Function Interrupt Pending */
#define SDIO_CCCR_ABORT 0x06 /* function abort/card reset */
#define SDIO_CCCR_IF 0x07 /* bus interface controls */
#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */
#define SDIO_BUS_WIDTH_1BIT 0x00
#define SDIO_BUS_WIDTH_RESERVED 0x01
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
#define SDIO_BUS_ASYNC_INT 0x20
#define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */
#define SDIO_CCCR_CAPS 0x08
#define SDIO_CCCR_CAP_SDC 0x01 /* can do CMD52 while data transfer */
#define SDIO_CCCR_CAP_SMB 0x02 /* can do multi-block xfers (CMD53) */
#define SDIO_CCCR_CAP_SRW 0x04 /* supports read-wait protocol */
#define SDIO_CCCR_CAP_SBS 0x08 /* supports suspend/resume */
#define SDIO_CCCR_CAP_S4MI 0x10 /* interrupt during 4-bit CMD53 */
#define SDIO_CCCR_CAP_E4MI 0x20 /* enable ints during 4-bit CMD53 */
#define SDIO_CCCR_CAP_LSC 0x40 /* low speed card */
#define SDIO_CCCR_CAP_4BLS 0x80 /* 4 bit low speed card */
#define SDIO_CCCR_CIS 0x09 /* common CIS pointer (3 bytes) */
/* Following 4 regs are valid only if SBS is set */
#define SDIO_CCCR_SUSPEND 0x0c
#define SDIO_CCCR_SELx 0x0d
#define SDIO_CCCR_EXECx 0x0e
#define SDIO_CCCR_READYx 0x0f
#define SDIO_CCCR_BLKSIZE 0x10
#define SDIO_CCCR_POWER 0x12
#define SDIO_POWER_SMPC 0x01 /* Supports Master Power Control */
#define SDIO_POWER_EMPC 0x02 /* Enable Master Power Control */
#define SDIO_CCCR_SPEED 0x13
#define SDIO_SPEED_SHS 0x01 /* Supports High-Speed mode */
#define SDIO_SPEED_BSS_SHIFT 1
#define SDIO_SPEED_BSS_MASK (7<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_SDR12 (0<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_SDR25 (1<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_SDR50 (2<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_SDR104 (3<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_DDR50 (4<<SDIO_SPEED_BSS_SHIFT)
#define SDIO_SPEED_EHS SDIO_SPEED_SDR25 /* Enable High-Speed */
#define SDIO_CCCR_UHS 0x14
#define SDIO_UHS_SDR50 0x01
#define SDIO_UHS_SDR104 0x02
#define SDIO_UHS_DDR50 0x04
#define SDIO_CCCR_DRIVE_STRENGTH 0x15
#define SDIO_SDTx_MASK 0x07
#define SDIO_DRIVE_SDTA (1<<0)
#define SDIO_DRIVE_SDTC (1<<1)
#define SDIO_DRIVE_SDTD (1<<2)
#define SDIO_DRIVE_DTSx_MASK 0x03
#define SDIO_DRIVE_DTSx_SHIFT 4
#define SDIO_DTSx_SET_TYPE_B (0 << SDIO_DRIVE_DTSx_SHIFT)
#define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT)
#define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT)
#define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT)
/*
* Function Basic Registers (FBR)
*/
#define SDIO_FBR_BASE(f) ((f) * 0x100) /* base of function f's FBRs */
#define SDIO_FBR_STD_IF 0x00
#define SDIO_FBR_SUPPORTS_CSA 0x40 /* supports Code Storage Area */
#define SDIO_FBR_ENABLE_CSA 0x80 /* enable Code Storage Area */
#define SDIO_FBR_STD_IF_EXT 0x01
#define SDIO_FBR_POWER 0x02
#define SDIO_FBR_POWER_SPS 0x01 /* Supports Power Selection */
#define SDIO_FBR_POWER_EPS 0x02 /* Enable (low) Power Selection */
#define SDIO_FBR_CIS 0x09 /* CIS pointer (3 bytes) */
#define SDIO_FBR_CSA 0x0C /* CSA pointer (3 bytes) */
#define SDIO_FBR_CSA_DATA 0x0F
#define SDIO_FBR_BLKSIZE 0x10 /* block size (2 bytes) */
#endif /* LINUX_MMC_SDIO_H */
include/linux/mmc/sdio_func.h
+170
View File
@@ -0,0 +1,170 @@
/*
* include/linux/mmc/sdio_func.h
*
* Copyright 2007-2008 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#ifndef LINUX_MMC_SDIO_FUNC_H
#define LINUX_MMC_SDIO_FUNC_H
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/mmc/pm.h>
struct mmc_card;
struct sdio_func;
typedef void (sdio_irq_handler_t)(struct sdio_func *);
/*
* SDIO function CIS tuple (unknown to the core)
*/
struct sdio_func_tuple {
struct sdio_func_tuple *next;
unsigned char code;
unsigned char size;
unsigned char data[0];
};
/*
* SDIO function devices
*/
struct sdio_func {
struct mmc_card *card; /* the card this device belongs to */
struct device dev; /* the device */
sdio_irq_handler_t *irq_handler; /* IRQ callback */
unsigned int num; /* function number */
unsigned char class; /* standard interface class */
unsigned short vendor; /* vendor id */
unsigned short device; /* device id */
unsigned max_blksize; /* maximum block size */
unsigned cur_blksize; /* current block size */
unsigned enable_timeout; /* max enable timeout in msec */
unsigned int state; /* function state */
#define SDIO_STATE_PRESENT (1<<0) /* present in sysfs */
u8 *tmpbuf; /* DMA:able scratch buffer */
unsigned num_info; /* number of info strings */
const char **info; /* info strings */
struct sdio_func_tuple *tuples;
};
#define sdio_func_present(f) ((f)->state & SDIO_STATE_PRESENT)
#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
#define sdio_func_id(f) (dev_name(&(f)->dev))
#define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev)
#define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d)
#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev)
/*
* SDIO function device driver
*/
struct sdio_driver {
char *name;
const struct sdio_device_id *id_table;
int (*probe)(struct sdio_func *, const struct sdio_device_id *);
void (*remove)(struct sdio_func *);
struct device_driver drv;
};
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code
* @dev: the 16 bit function id
*
* This macro is used to create a struct sdio_device_id that matches a
* specific device. The class field will be set to SDIO_ANY_ID.
*/
#define SDIO_DEVICE(vend,dev) \
.class = SDIO_ANY_ID, \
.vendor = (vend), .device = (dev)
/**
* SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
* @dev_class: the 8 bit standard interface code
*
* This macro is used to create a struct sdio_device_id that matches a
* specific standard SDIO function type. The vendor and device fields will
* be set to SDIO_ANY_ID.
*/
#define SDIO_DEVICE_CLASS(dev_class) \
.class = (dev_class), \
.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
extern int sdio_register_driver(struct sdio_driver *);
extern void sdio_unregister_driver(struct sdio_driver *);
/*
* SDIO I/O operations
*/
extern void sdio_claim_host(struct sdio_func *func);
extern void sdio_release_host(struct sdio_func *func);
extern int sdio_enable_func(struct sdio_func *func);
extern int sdio_disable_func(struct sdio_func *func);
extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
extern int sdio_release_irq(struct sdio_func *func);
extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
unsigned int addr, int count);
extern int sdio_readsb(struct sdio_func *func, void *dst,
unsigned int addr, int count);
extern void sdio_writeb(struct sdio_func *func, u8 b,
unsigned int addr, int *err_ret);
extern void sdio_writew(struct sdio_func *func, u16 b,
unsigned int addr, int *err_ret);
extern void sdio_writel(struct sdio_func *func, u32 b,
unsigned int addr, int *err_ret);
extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
unsigned int addr, int *err_ret);
extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
void *src, int count);
extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
void *src, int count);
extern unsigned char sdio_f0_readb(struct sdio_func *func,
unsigned int addr, int *err_ret);
extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
unsigned int addr, int *err_ret);
extern int sdio_proc_init(struct mmc_host *host);
extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
extern void sdio_retune_crc_disable(struct sdio_func *func);
extern void sdio_retune_crc_enable(struct sdio_func *func);
extern void sdio_retune_hold_now(struct sdio_func *func);
extern void sdio_retune_release(struct sdio_func *func);
#endif /* LINUX_MMC_SDIO_FUNC_H */
include/linux/mmc/sdio_ids.h
+77
View File
@@ -0,0 +1,77 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* SDIO Classes, Interface Types, Manufacturer IDs, etc.
*/
#ifndef LINUX_MMC_SDIO_IDS_H
#define LINUX_MMC_SDIO_IDS_H
/*
* Standard SDIO Function Interfaces
*/
#define SDIO_CLASS_NONE 0x00 /* Not a SDIO standard interface */
#define SDIO_CLASS_UART 0x01 /* standard UART interface */
#define SDIO_CLASS_BT_A 0x02 /* Type-A BlueTooth std interface */
#define SDIO_CLASS_BT_B 0x03 /* Type-B BlueTooth std interface */
#define SDIO_CLASS_GPS 0x04 /* GPS standard interface */
#define SDIO_CLASS_CAMERA 0x05 /* Camera standard interface */
#define SDIO_CLASS_PHS 0x06 /* PHS standard interface */
#define SDIO_CLASS_WLAN 0x07 /* WLAN interface */
#define SDIO_CLASS_ATA 0x08 /* Embedded SDIO-ATA std interface */
#define SDIO_CLASS_BT_AMP 0x09 /* Type-A Bluetooth AMP interface */
/*
* Vendors and devices. Sort key: vendor first, device next.
*/
#define SDIO_VENDOR_ID_BROADCOM 0x02d0
#define SDIO_DEVICE_ID_BROADCOM_43143 0xa887
#define SDIO_DEVICE_ID_BROADCOM_43241 0x4324
#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329
#define SDIO_DEVICE_ID_BROADCOM_4330 0x4330
#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334
#define SDIO_DEVICE_ID_BROADCOM_43340 0xa94c
#define SDIO_DEVICE_ID_BROADCOM_43341 0xa94d
#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
#define SDIO_DEVICE_ID_BROADCOM_4339 0x4339
#define SDIO_DEVICE_ID_BROADCOM_43362 0xa962
#define SDIO_DEVICE_ID_BROADCOM_43364 0xa9a4
#define SDIO_DEVICE_ID_BROADCOM_43430 0xa9a6
#define SDIO_DEVICE_ID_BROADCOM_4345 0x4345
#define SDIO_DEVICE_ID_BROADCOM_43455 0xa9bf
#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_DEVICE_ID_BROADCOM_4356 0x4356
#define SDIO_DEVICE_ID_CYPRESS_4373 0x4373
#define SDIO_VENDOR_ID_INTEL 0x0089
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403
#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404
#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405
#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5 0x1407
#define SDIO_VENDOR_ID_MARVELL 0x02df
#define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103
#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104
#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105
#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128
#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134
#define SDIO_VENDOR_ID_SIANO 0x039a
#define SDIO_DEVICE_ID_SIANO_NOVA_B0 0x0201
#define SDIO_DEVICE_ID_SIANO_NICE 0x0202
#define SDIO_DEVICE_ID_SIANO_VEGA_A0 0x0300
#define SDIO_DEVICE_ID_SIANO_VENICE 0x0301
#define SDIO_DEVICE_ID_SIANO_NOVA_A0 0x1100
#define SDIO_DEVICE_ID_SIANO_STELLAR 0x5347
#define SDIO_VENDOR_ID_TI 0x0097
#define SDIO_DEVICE_ID_TI_WL1271 0x4076
#define SDIO_VENDOR_ID_TI_WL1251 0x104c
#define SDIO_DEVICE_ID_TI_WL1251 0x9066
#define SDIO_VENDOR_ID_STE 0x0020
#define SDIO_DEVICE_ID_STE_CW1200 0x2280
#endif /* LINUX_MMC_SDIO_IDS_H */
include/linux/mmc/sh_mmcif.h
+213
View File
@@ -0,0 +1,213 @@
/*
* include/linux/mmc/sh_mmcif.h
*
* platform data for eMMC driver
*
* Copyright (C) 2010 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
*/
#ifndef LINUX_MMC_SH_MMCIF_H
#define LINUX_MMC_SH_MMCIF_H
#include <linux/io.h>
#include <linux/platform_device.h>
/*
* MMCIF : CE_CLK_CTRL [19:16]
* 1000 : Peripheral clock / 512
* 0111 : Peripheral clock / 256
* 0110 : Peripheral clock / 128
* 0101 : Peripheral clock / 64
* 0100 : Peripheral clock / 32
* 0011 : Peripheral clock / 16
* 0010 : Peripheral clock / 8
* 0001 : Peripheral clock / 4
* 0000 : Peripheral clock / 2
* 1111 : Peripheral clock (sup_pclk set '1')
*/
struct sh_mmcif_plat_data {
unsigned int slave_id_tx; /* embedded slave_id_[tr]x */
unsigned int slave_id_rx;
u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */
unsigned long caps;
u32 ocr;
};
#define MMCIF_CE_CMD_SET 0x00000000
#define MMCIF_CE_ARG 0x00000008
#define MMCIF_CE_ARG_CMD12 0x0000000C
#define MMCIF_CE_CMD_CTRL 0x00000010
#define MMCIF_CE_BLOCK_SET 0x00000014
#define MMCIF_CE_CLK_CTRL 0x00000018
#define MMCIF_CE_BUF_ACC 0x0000001C
#define MMCIF_CE_RESP3 0x00000020
#define MMCIF_CE_RESP2 0x00000024
#define MMCIF_CE_RESP1 0x00000028
#define MMCIF_CE_RESP0 0x0000002C
#define MMCIF_CE_RESP_CMD12 0x00000030
#define MMCIF_CE_DATA 0x00000034
#define MMCIF_CE_INT 0x00000040
#define MMCIF_CE_INT_MASK 0x00000044
#define MMCIF_CE_HOST_STS1 0x00000048
#define MMCIF_CE_HOST_STS2 0x0000004C
#define MMCIF_CE_CLK_CTRL2 0x00000070
#define MMCIF_CE_VERSION 0x0000007C
/* CE_BUF_ACC */
#define BUF_ACC_DMAWEN (1 << 25)
#define BUF_ACC_DMAREN (1 << 24)
#define BUF_ACC_BUSW_32 (0 << 17)
#define BUF_ACC_BUSW_16 (1 << 17)
#define BUF_ACC_ATYP (1 << 16)
/* CE_CLK_CTRL */
#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
#define CLK_CLEAR (0xf << 16)
#define CLK_SUP_PCLK (0xf << 16)
#define CLKDIV_4 (1 << 16) /* mmc clock frequency.
* n: bus clock/(2^(n+1)) */
#define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */
#define SRSPTO_256 (2 << 12) /* resp timeout */
#define SRBSYTO_29 (0xf << 8) /* resp busy timeout */
#define SRWDTO_29 (0xf << 4) /* read/write timeout */
#define SCCSTO_29 (0xf << 0) /* ccs timeout */
/* CE_VERSION */
#define SOFT_RST_ON (1 << 31)
#define SOFT_RST_OFF 0
static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
{
return __raw_readl(addr + reg);
}
static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
{
__raw_writel(val, addr + reg);
}
#define SH_MMCIF_BBS 512 /* boot block size */
static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
unsigned long cmd, unsigned long arg)
{
sh_mmcif_writel(base, MMCIF_CE_INT, 0);
sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
}
static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
{
unsigned long tmp;
int cnt;
for (cnt = 0; cnt < 1000000; cnt++) {
tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
if (tmp & mask) {
sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
return 0;
}
}
return -1;
}
static inline int sh_mmcif_boot_cmd(void __iomem *base,
unsigned long cmd, unsigned long arg)
{
sh_mmcif_boot_cmd_send(base, cmd, arg);
return sh_mmcif_boot_cmd_poll(base, 0x00010000);
}
static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
unsigned int block_nr,
unsigned long *buf)
{
int k;
/* CMD13 - Status */
sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
return -1;
/* CMD17 - Read */
sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
return -1;
for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
return 0;
}
static inline int sh_mmcif_boot_do_read(void __iomem *base,
unsigned long first_block,
unsigned long nr_blocks,
void *buf)
{
unsigned long k;
int ret = 0;
/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
/* CMD9 - Get CSD */
sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
/* CMD7 - Select the card */
sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
/* CMD16 - Set the block size */
sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
for (k = 0; !ret && k < nr_blocks; k++)
ret = sh_mmcif_boot_do_read_single(base, first_block + k,
buf + (k * SH_MMCIF_BBS));
return ret;
}
static inline void sh_mmcif_boot_init(void __iomem *base)
{
/* reset */
sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
/* byte swap */
sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
/* Set block size in MMCIF hardware */
sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
/* CMD0 */
sh_mmcif_boot_cmd(base, 0x00000040, 0);
/* CMD1 - Get OCR */
do {
sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
!= 0x80000000);
/* CMD2 - Get CID */
sh_mmcif_boot_cmd(base, 0x02806040, 0);
/* CMD3 - Set card relative address */
sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
}
#endif /* LINUX_MMC_SH_MMCIF_H */
include/linux/mmc/slot-gpio.h
+39
View File
@@ -0,0 +1,39 @@
/*
* Generic GPIO card-detect helper header
*
* Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef MMC_SLOT_GPIO_H
#define MMC_SLOT_GPIO_H
#include <linux/types.h>
#include <linux/irqreturn.h>
struct mmc_host;
int mmc_gpio_get_ro(struct mmc_host *host);
int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio);
int mmc_gpio_get_cd(struct mmc_host *host);
int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
unsigned int debounce);
int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
unsigned int idx, bool override_active_level,
unsigned int debounce, bool *gpio_invert);
int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
unsigned int idx, bool override_active_level,
unsigned int debounce, bool *gpio_invert);
void mmc_gpio_set_cd_isr(struct mmc_host *host,
irqreturn_t (*isr)(int irq, void *dev_id));
int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on);
void mmc_gpiod_request_cd_irq(struct mmc_host *host);
bool mmc_can_gpio_cd(struct mmc_host *host);
bool mmc_can_gpio_ro(struct mmc_host *host);
#endif