Initial commit: Linux kernel 4.19 for Unplugged OS

include/linux/phy/mediatek/mtk_usb_phy.h

@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+*/
+
+
+#ifndef __MTK_USB_PHY_NEW_H
+#define __MTK_USB_PHY_NEW_H
+#include <linux/types.h>
+#include <linux/clk.h>
+
+/* helpers for direct access thru low-level io interface */
+
+#ifdef CONFIG_PHY_MTK_USB
+extern int usb_mtkphy_switch_to_usb(struct phy *phy);
+extern int usb_mtkphy_switch_to_uart(struct phy *phy);
+extern int usb_mtkphy_check_in_uart_mode(struct phy *phy);
+extern int usb_mtkphy_dump_usb2uart_reg(struct phy *phy);
+extern int usb_mtkphy_u3_loop_back_test(struct phy *phy);
+extern int usb_mtkphy_sib_enable_switch(struct phy *phy, bool enable);
+extern int usb_mtkphy_sib_enable_switch_status(struct phy *phy);
+extern int usb_mtkphy_switch_to_bc11(struct phy *phy, bool on);
+extern int usb_mtkphy_dpdm_pulldown(struct phy *phy, bool enable);
+extern int usb_mtkphy_lpm_enable(struct phy *phy, bool on);
+extern int usb_mtkphy_host_mode(struct phy *phy, bool on);
+extern int usb_mtkphy_io_read(struct phy *phy, u32 reg);
+extern int usb_mtkphy_io_write(struct phy *phy, u32 val, u32 reg);
+#else
+static inline int usb_mtkphy_switch_to_usb(struct phy *phy)
+{
+	return -ENODEV;
+}
+static inline int usb_mtkphy_switch_to_uart(struct phy *phy)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_check_in_uart_mode(struct phy *phy)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_dump_usb2uart_reg(struct phy *phy)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_u3_loop_back_test(struct phy *phy)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_sib_enable_switch(struct phy *phy,
+	bool enable)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_sib_enable_switch_status(struct phy *phy)
+{
+	return -ENODEV;
+}
+
+static inline int usb_mtkphy_switch_to_bc11(struct phy *phy, bool on)
+{
+	return -ENODEV;
+}
+static inline int usb_mtkphy_lpm_enable(struct phy *phy, bool on)
+{
+	return -ENODEV;
+}
+static inline int usb_mtkphy_host_mode(struct phy *phy, bool on)
+{
+	return -ENODEV;
+}
+static inline int usb_mtkphy_io_read(struct phy *phy, u32 reg)
+{
+	return -ENODEV;
+}
+static inline int usb_mtkphy_io_write(struct phy *phy,
+	u32 val, u32 reg)
+{
+	return -ENODEV;
+}
+
+#endif
+
+#ifdef CONFIG_MTK_UART_USB_SWITCH
+enum PORT_MODE {
+	PORT_MODE_USB = 0,
+	PORT_MODE_UART,
+	PORT_MODE_MAX
+};
+
+#define RG_GPIO_SELECT (0x600)
+#define GPIO_SEL_OFFSET (0)
+#define GPIO_SEL_MASK (0x3 << GPIO_SEL_OFFSET)
+#define GPIO_SEL_UART0 (0x1 << GPIO_SEL_OFFSET)
+#endif
+#endif

include/linux/phy/omap_control_phy.h

@@ -0,0 +1,99 @@
+/*
+ * omap_control_phy.h - Header file for the PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __OMAP_CONTROL_PHY_H__
+#define __OMAP_CONTROL_PHY_H__
+
+enum omap_control_phy_type {
+	OMAP_CTRL_TYPE_OTGHS = 1,	/* Mailbox OTGHS_CONTROL */
+	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
+	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+	OMAP_CTRL_TYPE_PCIE,	/* RX TX control of ACSPCIE */
+	OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
+struct omap_control_phy {
+	struct device *dev;
+
+	u32 __iomem *otghs_control;
+	u32 __iomem *power;
+	u32 __iomem *power_aux;
+	u32 __iomem *pcie_pcs;
+
+	struct clk *sys_clk;
+
+	enum omap_control_phy_type type;
+};
+
+enum omap_control_usb_mode {
+	USB_MODE_UNDEFINED = 0,
+	USB_MODE_HOST,
+	USB_MODE_DEVICE,
+	USB_MODE_DISCONNECT,
+};
+
+#define	OMAP_CTRL_DEV_PHY_PD		BIT(0)
+
+#define	OMAP_CTRL_DEV_AVALID		BIT(0)
+#define	OMAP_CTRL_DEV_BVALID		BIT(1)
+#define	OMAP_CTRL_DEV_VBUSVALID		BIT(2)
+#define	OMAP_CTRL_DEV_SESSEND		BIT(3)
+#define	OMAP_CTRL_DEV_IDDIG		BIT(4)
+
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK		0x003FC000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT	0xE
+
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	0xFFC00000
+#define	OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT	0x16
+
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON	0x3
+#define	OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF	0x0
+
+#define	OMAP_CTRL_PCIE_PCS_MASK			0xff
+#define	OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT	16
+
+#define OMAP_CTRL_USB2_PHY_PD		BIT(28)
+
+#define AM437X_CTRL_USB2_PHY_PD		BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD		BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN	BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN	BIT(20)
+
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
+void omap_control_phy_power(struct device *dev, int on);
+void omap_control_usb_set_mode(struct device *dev,
+			       enum omap_control_usb_mode mode);
+void omap_control_pcie_pcs(struct device *dev, u8 delay);
+#else
+
+static inline void omap_control_phy_power(struct device *dev, int on)
+{
+}
+
+static inline void omap_control_usb_set_mode(struct device *dev,
+	enum omap_control_usb_mode mode)
+{
+}
+
+static inline void omap_control_pcie_pcs(struct device *dev, u8 delay)
+{
+}
+#endif
+
+#endif	/* __OMAP_CONTROL_PHY_H__ */

include/linux/phy/omap_usb.h

@@ -0,0 +1,100 @@
+/*
+ * omap_usb.h -- omap usb2 phy header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_USB2_H
+#define __DRIVERS_OMAP_USB2_H
+
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+
+struct usb_dpll_params {
+	u16	m;
+	u8	n;
+	u8	freq:3;
+	u8	sd;
+	u32	mf;
+};
+
+enum omap_usb_phy_type {
+	TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
+	TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
+struct omap_usb {
+	struct usb_phy		phy;
+	struct phy_companion	*comparator;
+	void __iomem		*pll_ctrl_base;
+	void __iomem		*phy_base;
+	struct device		*dev;
+	struct device		*control_dev;
+	struct clk		*wkupclk;
+	struct clk		*optclk;
+	u8			flags;
+	enum omap_usb_phy_type	type;
+	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
+	unsigned int		power_reg; /* power reg. index within syscon */
+	u32			mask;
+	u32			power_on;
+	u32			power_off;
+};
+
+struct usb_phy_data {
+	const char *label;
+	u8 flags;
+	u32 mask;
+	u32 power_on;
+	u32 power_off;
+};
+
+/* Driver Flags */
+#define OMAP_USB2_HAS_START_SRP (1 << 0)
+#define OMAP_USB2_HAS_SET_VBUS (1 << 1)
+#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
+
+#define OMAP_DEV_PHY_PD		BIT(0)
+#define OMAP_USB2_PHY_PD	BIT(28)
+
+#define AM437X_USB2_PHY_PD		BIT(0)
+#define AM437X_USB2_OTG_PD		BIT(1)
+#define AM437X_USB2_OTGVDET_EN		BIT(19)
+#define AM437X_USB2_OTGSESSEND_EN	BIT(20)
+
+#define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
+
+#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
+extern int omap_usb2_set_comparator(struct phy_companion *comparator);
+#else
+static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+	return -ENODEV;
+}
+#endif
+
+static inline u32 omap_usb_readl(void __iomem *addr, unsigned offset)
+{
+	return __raw_readl(addr + offset);
+}
+
+static inline void omap_usb_writel(void __iomem *addr, unsigned offset,
+	u32 data)
+{
+	__raw_writel(data, addr + offset);
+}
+
+#endif /* __DRIVERS_OMAP_USB_H */

include/linux/phy/phy-qcom-ufs.h

@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef PHY_QCOM_UFS_H_
+#define PHY_QCOM_UFS_H_
+
+#include "phy.h"
+
+/**
+ * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
+
+/**
+ * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device
+ * ref clock.
+ * @phy: reference to a generic phy.
+ */
+void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
+
+int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
+void ufs_qcom_phy_save_controller_version(struct phy *phy,
+			u8 major, u16 minor, u16 step);
+
+#endif /* PHY_QCOM_UFS_H_ */

include/linux/phy/phy-sun4i-usb.h

@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PHY_SUN4I_USB_H_
+#define PHY_SUN4I_USB_H_
+
+#include "phy.h"
+
+/**
+ * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
+ * @phy: reference to a sun4i usb phy
+ * @enabled: wether to enable or disable squelch detect
+ */
+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
+
+#endif

include/linux/phy/phy.h

@@ -0,0 +1,435 @@
+/*
+ * phy.h -- generic phy header file
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DRIVERS_PHY_H
+#define __DRIVERS_PHY_H
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+struct phy;
+
+enum phy_mode {
+	PHY_MODE_INVALID,
+	PHY_MODE_USB_HOST,
+	PHY_MODE_USB_HOST_LS,
+	PHY_MODE_USB_HOST_FS,
+	PHY_MODE_USB_HOST_HS,
+	PHY_MODE_USB_HOST_SS,
+	PHY_MODE_USB_DEVICE,
+	PHY_MODE_USB_DEVICE_LS,
+	PHY_MODE_USB_DEVICE_FS,
+	PHY_MODE_USB_DEVICE_HS,
+	PHY_MODE_USB_DEVICE_SS,
+	PHY_MODE_USB_OTG,
+	PHY_MODE_UART,
+	PHY_MODE_SGMII,
+	PHY_MODE_2500SGMII,
+	PHY_MODE_10GKR,
+	PHY_MODE_UFS_HS_A,
+	PHY_MODE_UFS_HS_B,
+};
+
+/**
+ * struct phy_ops - set of function pointers for performing phy operations
+ * @init: operation to be performed for initializing phy
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the phy
+ * @power_off: powering off the phy
+ * @set_mode: set the mode of the phy
+ * @reset: resetting the phy
+ * @calibrate: calibrate the phy
+ * @owner: the module owner containing the ops
+ */
+struct phy_ops {
+	int	(*init)(struct phy *phy);
+	int	(*exit)(struct phy *phy);
+	int	(*power_on)(struct phy *phy);
+	int	(*power_off)(struct phy *phy);
+	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
+	int	(*get_mode_ext)(struct phy *phy);
+	int	(*reset)(struct phy *phy);
+	int	(*calibrate)(struct phy *phy);
+	struct module *owner;
+};
+
+/**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ */
+struct phy_attrs {
+	u32			bus_width;
+	enum phy_mode		mode;
+};
+
+/**
+ * struct phy - represents the phy device
+ * @dev: phy device
+ * @id: id of the phy device
+ * @ops: function pointers for performing phy operations
+ * @init_data: list of PHY consumers (non-dt only)
+ * @mutex: mutex to protect phy_ops
+ * @init_count: used to protect when the PHY is used by multiple consumers
+ * @power_count: used to protect when the PHY is used by multiple consumers
+ * @attrs: used to specify PHY specific attributes
+ * @pwr: power regulator associated with the phy
+ */
+struct phy {
+	struct device		dev;
+	int			id;
+	const struct phy_ops	*ops;
+	struct mutex		mutex;
+	int			init_count;
+	int			power_count;
+	struct phy_attrs	attrs;
+	struct regulator	*pwr;
+};
+
+/**
+ * struct phy_provider - represents the phy provider
+ * @dev: phy provider device
+ * @children: can be used to override the default (dev->of_node) child node
+ * @owner: the module owner having of_xlate
+ * @list: to maintain a linked list of PHY providers
+ * @of_xlate: function pointer to obtain phy instance from phy pointer
+ */
+struct phy_provider {
+	struct device		*dev;
+	struct device_node	*children;
+	struct module		*owner;
+	struct list_head	list;
+	struct phy * (*of_xlate)(struct device *dev,
+		struct of_phandle_args *args);
+};
+
+/**
+ * struct phy_lookup - PHY association in list of phys managed by the phy driver
+ * @node: list node
+ * @dev_id: the device of the association
+ * @con_id: connection ID string on device
+ * @phy: the phy of the association
+ */
+struct phy_lookup {
+	struct list_head node;
+	const char *dev_id;
+	const char *con_id;
+	struct phy *phy;
+};
+
+#define	to_phy(a)	(container_of((a), struct phy, dev))
+
+#define	of_phy_provider_register(dev, xlate)	\
+	__of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define	devm_of_phy_provider_register(dev, xlate)	\
+	__devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate))
+
+#define of_phy_provider_register_full(dev, children, xlate) \
+	__of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+#define devm_of_phy_provider_register_full(dev, children, xlate) \
+	__devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate)
+
+static inline void phy_set_drvdata(struct phy *phy, void *data)
+{
+	dev_set_drvdata(&phy->dev, data);
+}
+
+static inline void *phy_get_drvdata(struct phy *phy)
+{
+	return dev_get_drvdata(&phy->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_PHY)
+int phy_pm_runtime_get(struct phy *phy);
+int phy_pm_runtime_get_sync(struct phy *phy);
+int phy_pm_runtime_put(struct phy *phy);
+int phy_pm_runtime_put_sync(struct phy *phy);
+void phy_pm_runtime_allow(struct phy *phy);
+void phy_pm_runtime_forbid(struct phy *phy);
+int phy_init(struct phy *phy);
+int phy_exit(struct phy *phy);
+int phy_power_on(struct phy *phy);
+int phy_power_off(struct phy *phy);
+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode);
+#define phy_set_mode(phy, mode) \
+	phy_set_mode_ext(phy, mode, 0)
+int phy_get_mode_ext(struct phy *phy);
+
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return phy->attrs.mode;
+}
+int phy_reset(struct phy *phy);
+int phy_calibrate(struct phy *phy);
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return phy->attrs.bus_width;
+}
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	phy->attrs.bus_width = bus_width;
+}
+struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
+			    const char *con_id);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
+void phy_put(struct phy *phy);
+void devm_phy_put(struct device *dev, struct phy *phy);
+struct phy *of_phy_get(struct device_node *np, const char *con_id);
+struct phy *of_phy_simple_xlate(struct device *dev,
+	struct of_phandle_args *args);
+struct phy *phy_create(struct device *dev, struct device_node *node,
+		       const struct phy_ops *ops);
+struct phy *devm_phy_create(struct device *dev, struct device_node *node,
+			    const struct phy_ops *ops);
+void phy_destroy(struct phy *phy);
+void devm_phy_destroy(struct device *dev, struct phy *phy);
+struct phy_provider *__of_phy_provider_register(struct device *dev,
+	struct device_node *children, struct module *owner,
+	struct phy * (*of_xlate)(struct device *dev,
+				 struct of_phandle_args *args));
+struct phy_provider *__devm_of_phy_provider_register(struct device *dev,
+	struct device_node *children, struct module *owner,
+	struct phy * (*of_xlate)(struct device *dev,
+				 struct of_phandle_args *args));
+void of_phy_provider_unregister(struct phy_provider *phy_provider);
+void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider);
+int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id);
+#else
+static inline int phy_pm_runtime_get(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_get_sync(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_put(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_pm_runtime_put_sync(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline void phy_pm_runtime_allow(struct phy *phy)
+{
+	return;
+}
+
+static inline void phy_pm_runtime_forbid(struct phy *phy)
+{
+	return;
+}
+
+static inline int phy_init(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_exit(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_power_on(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_power_off(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode,
+				   int submode)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+#define phy_set_mode(phy, mode) \
+	phy_set_mode_ext(phy, mode, 0)
+
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+	return PHY_MODE_INVALID;
+}
+
+static inline int phy_reset(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_calibrate(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	return;
+}
+
+static inline struct phy *phy_get(struct device *dev, const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *phy_optional_get(struct device *dev,
+					   const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_get(struct device *dev, const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+						const char *string)
+{
+	return NULL;
+}
+
+static inline struct phy *devm_of_phy_get(struct device *dev,
+					  struct device_node *np,
+					  const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_of_phy_get_by_index(struct device *dev,
+						   struct device_node *np,
+						   int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_put(struct phy *phy)
+{
+}
+
+static inline void devm_phy_put(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy *of_phy_get(struct device_node *np, const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *of_phy_simple_xlate(struct device *dev,
+	struct of_phandle_args *args)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *phy_create(struct device *dev,
+				     struct device_node *node,
+				     const struct phy_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy *devm_phy_create(struct device *dev,
+					  struct device_node *node,
+					  const struct phy_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void phy_destroy(struct phy *phy)
+{
+}
+
+static inline void devm_phy_destroy(struct device *dev, struct phy *phy)
+{
+}
+
+static inline struct phy_provider *__of_phy_provider_register(
+	struct device *dev, struct device_node *children, struct module *owner,
+	struct phy * (*of_xlate)(struct device *dev,
+				 struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct phy_provider *__devm_of_phy_provider_register(struct device
+	*dev, struct device_node *children, struct module *owner,
+	struct phy * (*of_xlate)(struct device *dev,
+				 struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void of_phy_provider_unregister(struct phy_provider *phy_provider)
+{
+}
+
+static inline void devm_of_phy_provider_unregister(struct device *dev,
+	struct phy_provider *phy_provider)
+{
+}
+static inline int
+phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id)
+{
+	return 0;
+}
+static inline void phy_remove_lookup(struct phy *phy, const char *con_id,
+				     const char *dev_id) { }
+#endif
+
+#endif /* __DRIVERS_PHY_H */

include/linux/phy/tegra/xusb.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef PHY_TEGRA_XUSB_H
+#define PHY_TEGRA_XUSB_H
+
+struct tegra_xusb_padctl;
+struct device;
+
+struct tegra_xusb_padctl *tegra_xusb_padctl_get(struct device *dev);
+void tegra_xusb_padctl_put(struct tegra_xusb_padctl *padctl);
+
+int tegra_xusb_padctl_usb3_save_context(struct tegra_xusb_padctl *padctl,
+					unsigned int port);
+int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
+				    unsigned int port, bool idle);
+int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
+					   unsigned int port, bool enable);
+
+#endif /* PHY_TEGRA_XUSB_H */

include/linux/phy/ulpi_phy.h

@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/phy/phy.h>
+
+/**
+ * Helper that registers PHY for a ULPI device and adds a lookup for binding it
+ * and it's controller, which is always the parent.
+ */
+static inline struct phy
+*ulpi_phy_create(struct ulpi *ulpi, const struct phy_ops *ops)
+{
+	struct phy *phy;
+	int ret;
+
+	phy = phy_create(&ulpi->dev, NULL, ops);
+	if (IS_ERR(phy))
+		return phy;
+
+	ret = phy_create_lookup(phy, "usb2-phy", dev_name(ulpi->dev.parent));
+	if (ret) {
+		phy_destroy(phy);
+		return ERR_PTR(ret);
+	}
+
+	return phy;
+}
+
+/* Remove a PHY that was created with ulpi_phy_create() and it's lookup. */
+static inline void ulpi_phy_destroy(struct ulpi *ulpi, struct phy *phy)
+{
+	phy_remove_lookup(phy, "usb2-phy", dev_name(ulpi->dev.parent));
+	phy_destroy(phy);
+}