Initial commit: Linux kernel 4.19 for Unplugged OS

This commit is contained in:
ziv committed 2025-10-06 13:52:42 +00:00
commit d30235b04c
80519 files changed
+35800681

No files matched your search

+12
View File
@@ -0,0 +1,12 @@
# Makefile for firmware loading selftests
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
all:
TEST_PROGS := fw_run_tests.sh
TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_lib.sh
include ../lib.mk
# Nothing to clean up.
clean:
+5
View File
@@ -0,0 +1,5 @@
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+283
View File
@@ -0,0 +1,283 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This validates that the kernel will fall back to using the fallback mechanism
# to load firmware it can't find on disk itself. We must request a firmware
# that the kernel won't find, and any installed helper (e.g. udev) also
# won't find so that we can do the load ourself manually.
set -e
TEST_REQS_FW_SYSFS_FALLBACK="yes"
TEST_REQS_FW_SET_CUSTOM_PATH="no"
TEST_DIR=$(dirname $0)
source $TEST_DIR/fw_lib.sh
check_mods
check_setup
verify_reqs
setup_tmp_file
trap "test_finish" EXIT
load_fw()
{
local name="$1"
local file="$2"
# This will block until our load (below) has finished.
echo -n "$name" >"$DIR"/trigger_request &
# Give kernel a chance to react.
local timeout=10
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "$0: firmware interface never appeared" >&2
exit 1
fi
done
echo 1 >"$DIR"/"$name"/loading
cat "$file" >"$DIR"/"$name"/data
echo 0 >"$DIR"/"$name"/loading
# Wait for request to finish.
wait
}
load_fw_cancel()
{
local name="$1"
local file="$2"
# This will block until our load (below) has finished.
echo -n "$name" >"$DIR"/trigger_request 2>/dev/null &
# Give kernel a chance to react.
local timeout=10
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "$0: firmware interface never appeared" >&2
exit 1
fi
done
echo -1 >"$DIR"/"$name"/loading
# Wait for request to finish.
wait
}
load_fw_custom()
{
if [ ! -e "$DIR"/trigger_custom_fallback ]; then
echo "$0: custom fallback trigger not present, ignoring test" >&2
exit $ksft_skip
fi
local name="$1"
local file="$2"
echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
# Give kernel a chance to react.
local timeout=10
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "$0: firmware interface never appeared" >&2
exit 1
fi
done
echo 1 >"$DIR"/"$name"/loading
cat "$file" >"$DIR"/"$name"/data
echo 0 >"$DIR"/"$name"/loading
# Wait for request to finish.
wait
return 0
}
load_fw_custom_cancel()
{
if [ ! -e "$DIR"/trigger_custom_fallback ]; then
echo "$0: canceling custom fallback trigger not present, ignoring test" >&2
exit $ksft_skip
fi
local name="$1"
local file="$2"
echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
# Give kernel a chance to react.
local timeout=10
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "$0: firmware interface never appeared" >&2
exit 1
fi
done
echo -1 >"$DIR"/"$name"/loading
# Wait for request to finish.
wait
return 0
}
load_fw_fallback_with_child()
{
local name="$1"
local file="$2"
# This is the value already set but we want to be explicit
echo 4 >/sys/class/firmware/timeout
sleep 1 &
SECONDS_BEFORE=$(date +%s)
echo -n "$name" >"$DIR"/trigger_request 2>/dev/null
SECONDS_AFTER=$(date +%s)
SECONDS_DELTA=$(($SECONDS_AFTER - $SECONDS_BEFORE))
if [ "$SECONDS_DELTA" -lt 4 ]; then
RET=1
else
RET=0
fi
wait
return $RET
}
test_syfs_timeout()
{
DEVPATH="$DIR"/"nope-$NAME"/loading
# Test failure when doing nothing (timeout works).
echo -n 2 >/sys/class/firmware/timeout
echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null &
# Give the kernel some time to load the loading file, must be less
# than the timeout above.
sleep 1
if [ ! -f $DEVPATH ]; then
echo "$0: fallback mechanism immediately cancelled"
echo ""
echo "The file never appeared: $DEVPATH"
echo ""
echo "This might be a distribution udev rule setup by your distribution"
echo "to immediately cancel all fallback requests, this must be"
echo "removed before running these tests. To confirm look for"
echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules"
echo "and see if you have something like this:"
echo ""
echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\""
echo ""
echo "If you do remove this file or comment out this line before"
echo "proceeding with these tests."
exit 1
fi
if diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not expected to match" >&2
exit 1
else
echo "$0: timeout works"
fi
}
run_sysfs_main_tests()
{
test_syfs_timeout
# Put timeout high enough for us to do work but not so long that failures
# slow down this test too much.
echo 4 >/sys/class/firmware/timeout
# Load this script instead of the desired firmware.
load_fw "$NAME" "$0"
if diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not expected to match" >&2
exit 1
else
echo "$0: firmware comparison works"
fi
# Do a proper load, which should work correctly.
load_fw "$NAME" "$FW"
if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded" >&2
exit 1
else
echo "$0: fallback mechanism works"
fi
load_fw_cancel "nope-$NAME" "$FW"
if diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was expected to be cancelled" >&2
exit 1
else
echo "$0: cancelling fallback mechanism works"
fi
set +e
load_fw_fallback_with_child "nope-signal-$NAME" "$FW"
if [ "$?" -eq 0 ]; then
echo "$0: SIGCHLD on sync ignored as expected" >&2
else
echo "$0: error - sync firmware request cancelled due to SIGCHLD" >&2
exit 1
fi
set -e
}
run_sysfs_custom_load_tests()
{
RANDOM_FILE_PATH=$(setup_random_file)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded" >&2
exit 1
else
echo "$0: custom fallback loading mechanism works"
fi
fi
RANDOM_FILE_PATH=$(setup_random_file)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded" >&2
exit 1
else
echo "$0: custom fallback loading mechanism works"
fi
fi
RANDOM_FILE_REAL="$RANDOM_FILE_PATH"
FAKE_RANDOM_FILE_PATH=$(setup_random_file_fake)
FAKE_RANDOM_FILE="$(basename $FAKE_RANDOM_FILE_PATH)"
if load_fw_custom_cancel "$FAKE_RANDOM_FILE" "$RANDOM_FILE_REAL" ; then
if diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was expected to be cancelled" >&2
exit 1
else
echo "$0: cancelling custom fallback mechanism works"
fi
fi
}
if [ "$HAS_FW_LOADER_USER_HELPER_FALLBACK" = "yes" ]; then
run_sysfs_main_tests
fi
run_sysfs_custom_load_tests
exit 0
+332
View File
@@ -0,0 +1,332 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This validates that the kernel will load firmware out of its list of
# firmware locations on disk. Since the user helper does similar work,
# we reset the custom load directory to a location the user helper doesn't
# know so we can be sure we're not accidentally testing the user helper.
set -e
TEST_REQS_FW_SYSFS_FALLBACK="no"
TEST_REQS_FW_SET_CUSTOM_PATH="yes"
TEST_DIR=$(dirname $0)
source $TEST_DIR/fw_lib.sh
check_mods
check_setup
verify_reqs
setup_tmp_file
trap "test_finish" EXIT
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
# Turn down the timeout so failures don't take so long.
echo 1 >/sys/class/firmware/timeout
fi
if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
echo "$0: empty filename should not succeed" >&2
exit 1
fi
if [ ! -e "$DIR"/trigger_async_request ]; then
echo "$0: empty filename: async trigger not present, ignoring test" >&2
exit $ksft_skip
else
if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
echo "$0: empty filename should not succeed (async)" >&2
exit 1
fi
fi
# Request a firmware that doesn't exist, it should fail.
if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
echo "$0: firmware shouldn't have loaded" >&2
exit 1
fi
if diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not expected to match" >&2
exit 1
else
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "$0: timeout works"
fi
fi
# This should succeed via kernel load or will fail after 1 second after
# being handed over to the user helper, which won't find the fw either.
if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
echo "$0: could not trigger request" >&2
exit 1
fi
# Verify the contents are what we expect.
if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded" >&2
exit 1
else
echo "$0: filesystem loading works"
fi
# Try the asynchronous version too
if [ ! -e "$DIR"/trigger_async_request ]; then
echo "$0: firmware loading: async trigger not present, ignoring test" >&2
exit $ksft_skip
else
if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
echo "$0: could not trigger async request" >&2
exit 1
fi
# Verify the contents are what we expect.
if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded (async)" >&2
exit 1
else
echo "$0: async filesystem loading works"
fi
fi
### Batched requests tests
test_config_present()
{
if [ ! -f $DIR/reset ]; then
echo "Configuration triggers not present, ignoring test"
exit $ksft_skip
fi
}
# Defaults :
#
# send_uevent: 1
# sync_direct: 0
# name: test-firmware.bin
# num_requests: 4
config_reset()
{
echo 1 > $DIR/reset
}
release_all_firmware()
{
echo 1 > $DIR/release_all_firmware
}
config_set_name()
{
echo -n $1 > $DIR/config_name
}
config_set_sync_direct()
{
echo 1 > $DIR/config_sync_direct
}
config_unset_sync_direct()
{
echo 0 > $DIR/config_sync_direct
}
config_set_uevent()
{
echo 1 > $DIR/config_send_uevent
}
config_unset_uevent()
{
echo 0 > $DIR/config_send_uevent
}
config_trigger_sync()
{
echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
}
config_trigger_async()
{
echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
}
config_set_read_fw_idx()
{
echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
}
read_firmwares()
{
for i in $(seq 0 3); do
config_set_read_fw_idx $i
# Verify the contents are what we expect.
# -Z required for now -- check for yourself, md5sum
# on $FW and DIR/read_firmware will yield the same. Even
# cmp agrees, so something is off.
if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
echo "request #$i: firmware was not loaded" >&2
exit 1
fi
done
}
read_firmwares_expect_nofile()
{
for i in $(seq 0 3); do
config_set_read_fw_idx $i
# Ensures contents differ
if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
echo "request $i: file was not expected to match" >&2
exit 1
fi
done
}
test_batched_request_firmware_nofile()
{
echo -n "Batched request_firmware() nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_trigger_sync
read_firmwares_expect_nofile
release_all_firmware
echo "OK"
}
test_batched_request_firmware_direct_nofile()
{
echo -n "Batched request_firmware_direct() nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_set_sync_direct
config_trigger_sync
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_uevent_nofile()
{
echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_trigger_async
release_all_firmware
echo "OK"
}
test_wait_and_cancel_custom_load()
{
if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
return
fi
local timeout=10
name=$1
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "firmware interface never appeared:" >&2
echo "$DIR/$name/loading" >&2
exit 1
fi
done
echo -1 >"$DIR"/"$name"/loading
}
test_request_firmware_nowait_custom_nofile()
{
echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
config_reset
config_unset_uevent
RANDOM_FILE_PATH=$(setup_random_file_fake)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
config_set_name $RANDOM_FILE
config_trigger_async &
test_wait_and_cancel_custom_load $RANDOM_FILE
wait
release_all_firmware
echo "OK"
}
test_batched_request_firmware()
{
echo -n "Batched request_firmware() try #$1: "
config_reset
config_trigger_sync
read_firmwares
release_all_firmware
echo "OK"
}
test_batched_request_firmware_direct()
{
echo -n "Batched request_firmware_direct() try #$1: "
config_reset
config_set_sync_direct
config_trigger_sync
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_uevent()
{
echo -n "Batched request_firmware_nowait(uevent=true) try #$1: "
config_reset
config_trigger_async
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_custom()
{
echo -n "Batched request_firmware_nowait(uevent=false) try #$1: "
config_reset
config_unset_uevent
RANDOM_FILE_PATH=$(setup_random_file)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
config_set_name $RANDOM_FILE
config_trigger_async
release_all_firmware
echo "OK"
}
# Only continue if batched request triggers are present on the
# test-firmware driver
test_config_present
# test with the file present
echo
echo "Testing with the file present..."
for i in $(seq 1 5); do
test_batched_request_firmware $i
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom $i
done
# Test for file not found, errors are expected, the failure would be
# a hung task, which would require a hard reset.
echo
echo "Testing with the file missing..."
for i in $(seq 1 5); do
test_batched_request_firmware_nofile $i
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct_nofile $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent_nofile $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom_nofile $i
done
exit 0
+205
View File
@@ -0,0 +1,205 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Library of helpers for test scripts.
set -e
DIR=/sys/devices/virtual/misc/test_firmware
PROC_CONFIG="/proc/config.gz"
TEST_DIR=$(dirname $0)
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
print_reqs_exit()
{
echo "You must have the following enabled in your kernel:" >&2
cat $TEST_DIR/config >&2
exit $ksft_skip
}
test_modprobe()
{
if [ ! -d $DIR ]; then
print_reqs_exit
fi
}
check_mods()
{
local uid=$(id -u)
if [ $uid -ne 0 ]; then
echo "skip all tests: must be run as root" >&2
exit $ksft_skip
fi
trap "test_modprobe" EXIT
if [ ! -d $DIR ]; then
modprobe test_firmware
fi
if [ ! -f $PROC_CONFIG ]; then
if modprobe configs 2>/dev/null; then
echo "Loaded configs module"
if [ ! -f $PROC_CONFIG ]; then
echo "You must have the following enabled in your kernel:" >&2
cat $TEST_DIR/config >&2
echo "Resorting to old heuristics" >&2
fi
else
echo "Failed to load configs module, using old heuristics" >&2
fi
fi
}
check_setup()
{
HAS_FW_LOADER_USER_HELPER="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)"
HAS_FW_LOADER_USER_HELPER_FALLBACK="$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)"
PROC_FW_IGNORE_SYSFS_FALLBACK="0"
PROC_FW_FORCE_SYSFS_FALLBACK="0"
if [ -z $PROC_SYS_DIR ]; then
PROC_SYS_DIR="/proc/sys/kernel"
fi
FW_PROC="${PROC_SYS_DIR}/firmware_config"
FW_FORCE_SYSFS_FALLBACK="$FW_PROC/force_sysfs_fallback"
FW_IGNORE_SYSFS_FALLBACK="$FW_PROC/ignore_sysfs_fallback"
if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
PROC_FW_FORCE_SYSFS_FALLBACK="$(cat $FW_FORCE_SYSFS_FALLBACK)"
fi
if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
PROC_FW_IGNORE_SYSFS_FALLBACK="$(cat $FW_IGNORE_SYSFS_FALLBACK)"
fi
if [ "$PROC_FW_FORCE_SYSFS_FALLBACK" = "1" ]; then
HAS_FW_LOADER_USER_HELPER="yes"
HAS_FW_LOADER_USER_HELPER_FALLBACK="yes"
fi
if [ "$PROC_FW_IGNORE_SYSFS_FALLBACK" = "1" ]; then
HAS_FW_LOADER_USER_HELPER_FALLBACK="no"
HAS_FW_LOADER_USER_HELPER="no"
fi
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
OLD_TIMEOUT="$(cat /sys/class/firmware/timeout)"
fi
OLD_FWPATH="$(cat /sys/module/firmware_class/parameters/path)"
}
verify_reqs()
{
if [ "$TEST_REQS_FW_SYSFS_FALLBACK" = "yes" ]; then
if [ ! "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "usermode helper disabled so ignoring test"
exit 0
fi
fi
}
setup_tmp_file()
{
FWPATH=$(mktemp -d)
FW="$FWPATH/test-firmware.bin"
echo "ABCD0123" >"$FW"
NAME=$(basename "$FW")
if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
fi
}
__setup_random_file()
{
RANDOM_FILE_PATH="$(mktemp -p $FWPATH)"
# mktemp says dry-run -n is unsafe, so...
if [[ "$1" = "fake" ]]; then
rm -rf $RANDOM_FILE_PATH
sync
else
echo "ABCD0123" >"$RANDOM_FILE_PATH"
fi
echo $RANDOM_FILE_PATH
}
setup_random_file()
{
echo $(__setup_random_file)
}
setup_random_file_fake()
{
echo $(__setup_random_file fake)
}
proc_set_force_sysfs_fallback()
{
if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
echo -n $1 > $FW_FORCE_SYSFS_FALLBACK
check_setup
fi
}
proc_set_ignore_sysfs_fallback()
{
if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
echo -n $1 > $FW_IGNORE_SYSFS_FALLBACK
check_setup
fi
}
proc_restore_defaults()
{
proc_set_force_sysfs_fallback 0
proc_set_ignore_sysfs_fallback 0
}
test_finish()
{
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
fi
if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
if [ "$OLD_FWPATH" = "" ]; then
# A zero-length write won't work; write a null byte
printf '\000' >/sys/module/firmware_class/parameters/path
else
echo -n "$OLD_FWPATH" >/sys/module/firmware_class/parameters/path
fi
fi
if [ -f $FW ]; then
rm -f "$FW"
fi
if [ -d $FWPATH ]; then
rm -rf "$FWPATH"
fi
proc_restore_defaults
}
kconfig_has()
{
if [ -f $PROC_CONFIG ]; then
if zgrep -q $1 $PROC_CONFIG 2>/dev/null; then
echo "yes"
else
echo "no"
fi
else
# We currently don't have easy heuristics to infer this
# so best we can do is just try to use the kernel assuming
# you had enabled it. This matches the old behaviour.
if [ "$1" = "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" ]; then
echo "yes"
elif [ "$1" = "CONFIG_FW_LOADER_USER_HELPER=y" ]; then
if [ -d /sys/class/firmware/ ]; then
echo yes
else
echo no
fi
fi
fi
}
+70
View File
@@ -0,0 +1,70 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This runs all known tests across all known possible configurations we could
# emulate in one run.
set -e
TEST_DIR=$(dirname $0)
source $TEST_DIR/fw_lib.sh
export HAS_FW_LOADER_USER_HELPER=""
export HAS_FW_LOADER_USER_HELPER_FALLBACK=""
run_tests()
{
proc_set_force_sysfs_fallback $1
proc_set_ignore_sysfs_fallback $2
$TEST_DIR/fw_filesystem.sh
proc_set_force_sysfs_fallback $1
proc_set_ignore_sysfs_fallback $2
$TEST_DIR/fw_fallback.sh
}
run_test_config_0001()
{
echo "-----------------------------------------------------"
echo "Running kernel configuration test 1 -- rare"
echo "Emulates:"
echo "CONFIG_FW_LOADER=y"
echo "CONFIG_FW_LOADER_USER_HELPER=n"
echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
run_tests 0 1
}
run_test_config_0002()
{
echo "-----------------------------------------------------"
echo "Running kernel configuration test 2 -- distro"
echo "Emulates:"
echo "CONFIG_FW_LOADER=y"
echo "CONFIG_FW_LOADER_USER_HELPER=y"
echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
proc_set_ignore_sysfs_fallback 0
run_tests 0 0
}
run_test_config_0003()
{
echo "-----------------------------------------------------"
echo "Running kernel configuration test 3 -- android"
echo "Emulates:"
echo "CONFIG_FW_LOADER=y"
echo "CONFIG_FW_LOADER_USER_HELPER=y"
echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y"
run_tests 1 0
}
check_mods
check_setup
if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
run_test_config_0001
run_test_config_0002
run_test_config_0003
else
echo "Running basic kernel configuration, working with your config"
run_tests
fi