/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (c) 2019 MediaTek Inc.
*/
bat_gm30: battery{
	compatible = "mediatek,bat_gm30";
	DIFFERENCE_FULLOCV_ITH = <(200)>;
/*	Charging termination current*/
	SHUTDOWN_1_TIME = <(30)>;
/*	If ui_soc shows 1% more than X minites, system will shutdown*/
	KEEP_100_PERCENT = <(1)>;
/*	The ui_soc will keep 100% until SOC drop X percents after unplugged*/
	R_FG_VALUE = <(5)>;
/*	R_sense resistance*/
	EMBEDDED_SEL = <(0)>;
/*	Configures whether using embedded battery or not*/
	PMIC_SHUTDOWN_CURRENT = <(20)>;
/*	System shutdown current*/
	FG_METER_RESISTANCE = <(100)>;
/*	The resistance of PCB*/
	CAR_TUNE_VALUE = <(100)>;
/*	Tune value for current measurement*/
	PMIC_MIN_VOL = <(33500)>;
/*	vboot voltage for gauge 0%*/
	POWERON_SYSTEM_IBOOT = <(500)>;
/*	power on system iboot*/
	SHUTDOWN_GAUGE0_VOLTAGE = <(34000)>;
/*	shutdown gauge 0% voltage*/
	TEMPERATURE_T0 = <(50)>;
/*	Battery temperature T0*/
	TEMPERATURE_T1 = <(25)>;
/*	Battery temperature T1*/
	TEMPERATURE_T2 = <(10)>;
/*	Battery temperature T2*/
	TEMPERATURE_T3 = <(0)>;
/*	Battery temperature T3*/
	TEMPERATURE_T4 = <(-6)>;
/*	Battery temperature T4*/
	TEMPERATURE_T5 = <(-10)>;
/*	Battery temperature T5*/
	g_FG_PSEUDO100_T0 = <(100)>;
/*	Pseudo 100% percentage at T0*/
	g_FG_PSEUDO100_T1 = <(100)>;
/*	Pseudo 100% percentage at T1*/
	g_FG_PSEUDO100_T2 = <(100)>;
/*	Pseudo 100% percentage at T2*/
	g_FG_PSEUDO100_T3 = <(100)>;
/*	Pseudo 100% percentage at T3*/
	g_FG_PSEUDO100_T4 = <(100)>;
/*	Pseudo 100% percentage at T4*/
	Q_MAX_SYS_VOLTAGE_BAT0 = <(3350)>;
/*	Pseudo1 for hide percentage*/
	Q_MAX_SYS_VOLTAGE_BAT1 = <(3350)>;
/*	Pseudo1 for hide percentage*/
	Q_MAX_SYS_VOLTAGE_BAT2 = <(3350)>;
/*	Pseudo1 for hide percentage*/
	Q_MAX_SYS_VOLTAGE_BAT3 = <(3350)>;
/*	Pseudo1 for hide percentage*/
	COM_FG_METER_RESISTANCE = <(100)>;
/*	compensate The resistance of PCB*/
	COM_R_FG_VALUE = <(0)>;
/*	compensate R_sense resistance*/
	enable_tmp_intr_suspend = <(0)>;
/* Enable update temp when suspend */
	ACTIVE_TABLE = <(6)>;
/* Table numbers per battery*/
	MULTI_TEMP_GAUGE0 = <(1)>;
/* Multi gauge0 enable*/
#include "mt6768_battery_table.dtsi"
};