/*
 * Copyright (C) 2014 NXP Semiconductors, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#ifndef TFA98XX_INTERNALS_H
#define TFA98XX_INTERNALS_H

#include "config.h"

#include "tfa_service.h" //TODO cleanup for enum Tfa98xx_Status_ID

/**
 * Return a text version of the firmware status ID code
 * @param status the given status ID code
 * @return the firmware status ID string
 */
const char *tfadsp_fw_status_string(enum Tfa98xx_Status_ID status);
int tfadsp_fw_start(struct tfa_device *tfa, int prof_idx, int vstep_idx);
int tfadsp_fw_get_api_version(struct tfa_device *tfa, uint8_t *buffer);
#define FW_MAXTAG 150
int tfadsp_fw_get_tag(struct tfa_device *tfa, uint8_t *buffer);
int tfadsp_fw_get_status_change(struct tfa_device *tfa, uint8_t *buffer);
int tfadsp_fw_set_re25(struct tfa_device *tfa, int prim, int sec);
int tfadsp_fw_get_re25(struct tfa_device *tfa, uint8_t *buffer);

/*
 * the order matches the ACK bits order in TFA98XX_CF_STATUS
 */
enum tfa_fw_event { /* not all available on each device */
		    tfa_fw_i2c_cmd_ack,
		    tfa_fw_reset_start,
		    tfa_fw_short_on_mips,
		    tfa_fw_soft_mute_ready,
		    tfa_fw_volume_ready,
		    tfa_fw_error_damage,
		    tfa_fw_calibrate_done,
		    tfa_fw_max
};

/* the following type mappings are compiler specific */
#define subaddress_t unsigned char

/* module Ids */
#define MODULE_FRAMEWORK 0
#define MODULE_SPEAKERBOOST 1
#define MODULE_BIQUADFILTERBANK 2
#define MODULE_TAPTRIGGER 5
#define MODULE_SETRE 9

/* RPC commands */
/* SET */
#define FW_PAR_ID_SET_MEMORY 0x03
#define FW_PAR_ID_SET_SENSES_DELAY 0x04
#define FW_PAR_ID_SETSENSESCAL 0x05
#define FW_PAR_ID_SET_INPUT_SELECTOR 0x06
#define FW_PAR_ID_SET_OUTPUT_SELECTOR 0x08
#define FW_PAR_ID_SET_PROGRAM_CONFIG 0x09
#define FW_PAR_ID_SET_GAINS 0x0A
#define FW_PAR_ID_SET_MEMTRACK 0x0B
#define FW_PAR_ID_SET_FWKUSECASE 0x11
#define TFA1_FW_PAR_ID_SET_CURRENT_DELAY 0x03
#define TFA1_FW_PAR_ID_SET_CURFRAC_DELAY 0x06
/* GET */
#define FW_PAR_ID_GET_MEMORY 0x83
#define FW_PAR_ID_GLOBAL_GET_INFO 0x84
#define FW_PAR_ID_GET_FEATURE_INFO 0x85
#define FW_PAR_ID_GET_MEMTRACK 0x8B
#define FW_PAR_ID_GET_TAG 0xFF
#define FW_PAR_ID_GET_API_VERSION 0xFE
#define FW_PAR_ID_GET_STATUS_CHANGE 0x8D

/* Load a full model into SpeakerBoost. */
/* SET */
#define SB_PARAM_SET_ALGO_PARAMS 0x00
#define SB_PARAM_SET_LAGW 0x01
#define SB_PARAM_SET_ALGO_PARAMS_WITHOUT_RESET 0x02
#define SB_PARAM_SET_RE25C 0x05
#define SB_PARAM_SET_LSMODEL 0x06
#define SB_PARAM_SET_MBDRC 0x07
#define SB_PARAM_SET_MBDRC_WITHOUT_RESET 0x08
#define SB_PARAM_SET_EXCURSION_FILTERS 0x0A
#define SB_PARAM_SET_DRC 0x0F
/* GET */
#define SB_PARAM_GET_ALGO_PARAMS 0x80
#define SB_PARAM_GET_LAGW 0x81
#define SB_PARAM_GET_RE25C 0x85
#define SB_PARAM_GET_LSMODEL 0x86
#define SB_PARAM_GET_MBDRC 0x87
#define SB_PARAM_GET_MBDRC_DYNAMICS 0x89
#define SB_PARAM_GET_EXCURSION_FILTERS 0x8A
#define SB_PARAM_GET_TAG 0xFF

#define SB_PARAM_SET_EQ 0x0A     /* 2 Equaliser Filters. */
#define SB_PARAM_SET_PRESET 0x0D /* Load a preset */
#define SB_PARAM_SET_CONFIG 0x0E /* Load a config */
#define SB_PARAM_SET_AGCINS 0x10
#define SB_PARAM_SET_CURRENT_DELAY 0x03
#define SB_PARAM_GET_STATE 0xC0
#define SB_PARAM_GET_XMODEL 0xC1	    /* Gets current Excursion Model. */
#define SB_PARAM_GET_XMODEL_COEFFS 0x8C     /* Get coefficients for XModel */
#define SB_PARAM_GET_EXCURSION_FILTERS 0x8A /* Get excursion filters */
#define SB_PARAM_SET_EXCURSION_FILTERS 0x0A /* Set excursion filters */

/*	SET: TAPTRIGGER */
#define TAP_PARAM_SET_ALGO_PARAMS 0x01
#define TAP_PARAM_SET_DECIMATION_PARAMS 0x02

/* GET: TAPTRIGGER*/
#define TAP_PARAM_GET_ALGO_PARAMS 0x81
#define TAP_PARAM_GET_TAP_RESULTS 0x84

/* sets the speaker calibration impedance (@25 degrees celsius) */
#define SB_PARAM_SET_RE0 0x89

#define BFB_PAR_ID_SET_COEFS 0x00
#define BFB_PAR_ID_GET_COEFS 0x80
#define BFB_PAR_ID_GET_CONFIG 0x81

/* for compatibility */
#define FW_PARAM_GET_STATE FW_PAR_ID_GLOBAL_GET_INFO
#define FW_PARAM_GET_FEATURE_BITS FW_PAR_ID_GET_FEATURE_BITS

/* RPC Status results */
#define STATUS_OK 0
#define STATUS_INVALID_MODULE_ID 2
#define STATUS_INVALID_PARAM_ID 3
#define STATUS_INVALID_INFO_ID 4

/* the maximum message length in the communication with the DSP */
#define TFA2_MAX_PARAM_SIZE (507 * 3) /* TFA2 */
#define TFA1_MAX_PARAM_SIZE (145 * 3) /* TFA1 */

#define ROUND_DOWN(a, n) (((a) / (n)) * (n))

/* feature bits */
#define FEATURE1_TCOEF 0x100 /* bit8 set means tCoefA expected */
#define FEATURE1_DRC 0x200   /* bit9 NOT set means DRC expected */

/* DSP firmware xmem defines */
#define TFA1_FW_XMEM_CALIBRATION_DONE 231
#define TFA2_FW_XMEM_CALIBRATION_DONE 516
#define TFA1_FW_XMEM_COUNT_BOOT 0xa1
#define TFA2_FW_XMEM_COUNT_BOOT 512
#define TFA2_FW_XMEM_CMD_COUNT 520

/* note that the following defs rely on the handle variable */
#define TFA_FW_XMEM_CALIBRATION_DONE TFA_FAM_FW(tfa, XMEM_CALIBRATION_DONE)
#define TFA_FW_XMEM_COUNT_BOOT TFA_FAM_FW(tfa, XMEM_COUNT_BOOT)
#define TFA_FW_XMEM_CMD_COUNT TFA_FAM_FW(tfa, XMEM_CMD_COUNT)

#define TFA2_FW_ReZ_SCALE 65536
#define TFA1_FW_ReZ_SCALE 16384

#endif /* TFA98XX_INTERNALS_H */