560 lines
12 KiB
Plaintext
560 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2019 MediaTek Inc.
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/pinctrl/mt6761-pinfunc.h>
|
|
#include <dt-bindings/mmc/mt6761-msdc.h>
|
|
#include <dt-bindings/clock/mt6761-clk.h>
|
|
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
/* chosen */
|
|
&chosen {
|
|
|
|
/* fpga may has no lk, we need to specify display info here */
|
|
/* fb buffer is reserved using this dts by memory node above */
|
|
atag,videolfb-fb_base_h = <0x0>;
|
|
atag,videolfb-fb_base_l = <0x5e605000>;
|
|
atag,videolfb-islcmfound = <1>;
|
|
/* because no lk, so lcm is not inited */
|
|
atag,videolfb-islcm_inited = <0>;
|
|
atag,videolfb-fps= <6000>;
|
|
atag,videolfb-vramSize= <0x017bb000>;
|
|
atag,videolfb-lcmname= "nt35521_hd_dsi_vdo_truly_rt5081_drv";
|
|
};
|
|
|
|
&odm {
|
|
led0:led@0 {
|
|
compatible = "mediatek,red";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led1:led@1 {
|
|
compatible = "mediatek,green";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led2:led@2 {
|
|
compatible = "mediatek,blue";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led3:led@3 {
|
|
compatible = "mediatek,jogball-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led4:led@4 {
|
|
compatible = "mediatek,keyboard-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led5:led@5 {
|
|
compatible = "mediatek,button-backlight";
|
|
led_mode = <0>;
|
|
data = <1>;
|
|
pwm_config = <0 0 0 0 0>;
|
|
};
|
|
led6:led@6 {
|
|
compatible = "mediatek,lcd-backlight";
|
|
led_mode = <5>;
|
|
data = <1>;
|
|
pwm_config = <0 3 0 0 0>;
|
|
};
|
|
vibrator0:vibrator@0 {
|
|
compatible = "mediatek,vibrator";
|
|
vib_timer = <25>;
|
|
vib_limit = <9>;
|
|
vib_vol= <11>;
|
|
};
|
|
fingerprint:fingerprint {
|
|
compatible = "mediatek,mt6753-fingerprint";
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <8 1 8 0>;
|
|
debounce = <8 0>;
|
|
|
|
pinctrl-names ="fingerprint_default",
|
|
"fingerprint_pin_irq",
|
|
"fingerprint_eint_pull_down",
|
|
"fingerprint_reset_high",
|
|
"fingerprint_reset_low",
|
|
"fingerprint_power_high",
|
|
"fingerprint_power_low";
|
|
|
|
pinctrl-0 = <&fingerprint_default>;
|
|
pinctrl-1 = <&fingerprint_eint>;
|
|
pinctrl-2 = <&fingerprint_eint_pull_down>;
|
|
pinctrl-3 = <&fingerprint_rst_one>;
|
|
pinctrl-4 = <&fingerprint_rst_zero>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
fingerprint@0 {
|
|
compatible = "sunwave-fp";
|
|
reg = <0>;
|
|
spi-max-frequency = <8000000>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
fingerprint_default: fingerprint_default {
|
|
};
|
|
|
|
fingerprint_eint: gpio8_eint {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
fingerprint_eint_pull_down: gpio8_eint_pull_down {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
|
|
slew-rate = <0>;
|
|
bias-pull-down = <00>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
fingerprint_rst_one: rst_out_one {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO24__FUNC_GPIO24>;
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
fingerprint_rst_zero: rst_out_zero {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO24__FUNC_GPIO24>;
|
|
slew-rate = <1>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-frequency = <400000>;
|
|
|
|
mtk-usb@60 {
|
|
compatible = "mediatek,mtk-usb";
|
|
reg = <0x60>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
ext_buck_lp4@57 {
|
|
regulator-name ="ext_buck_vdd2";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
vsel_pin = <0>;
|
|
};
|
|
|
|
ext_buck_lp4x@50 {
|
|
regulator-name ="ext_buck_vddq";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
vsel_pin = <1>;
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
ext_buck_vgpu@55 {
|
|
regulator-name ="ext_buck_vgpu";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
vsel_pin = <2>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
mtkfb_pins_lcm_reset0: lcm_rst_out0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcm_reset1: lcm_rst_out1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
mtkfb_pins_lcd_bias_enp0: lcd_bias_enp0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enp1: lcd_bias_enp1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enn0: lcd_bias_enn0_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO159__FUNC_GPIO159>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_lcd_bias_enn1: lcd_bias_enn1_gpio {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO159__FUNC_GPIO159>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
mtkfb_pins_default: dispdefault {
|
|
};
|
|
};
|
|
|
|
&mtkfb {
|
|
pinctrl-names = "dispdefault", "lcm_rst_out0_gpio", "lcm_rst_out1_gpio",
|
|
"lcd_bias_enp0_gpio", "lcd_bias_enp1_gpio",
|
|
"lcd_bias_enn0_gpio", "lcd_bias_enn1_gpio";
|
|
pinctrl-0 = <&mtkfb_pins_default>;
|
|
pinctrl-1 = <&mtkfb_pins_lcm_reset0>;
|
|
pinctrl-2 = <&mtkfb_pins_lcm_reset1>;
|
|
pinctrl-3 = <&mtkfb_pins_lcd_bias_enp0>;
|
|
pinctrl-4 = <&mtkfb_pins_lcd_bias_enp1>;
|
|
pinctrl-5 = <&mtkfb_pins_lcd_bias_enn0>;
|
|
pinctrl-6 = <&mtkfb_pins_lcd_bias_enn1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mtk_gauge {
|
|
charger = <&mtk_charger_type>;
|
|
};
|
|
|
|
&charger {
|
|
charger = <&mtk_charger_type>;
|
|
};
|
|
|
|
&mtk_charger_type {
|
|
bc12_active = <1>;
|
|
};
|
|
|
|
&i2c5 {
|
|
bq25601:bq25601@D6{
|
|
compatible = "mediatek,bq25601";
|
|
reg = <0x6B>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
/* TOUCH start */
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default", "state_eint_as_int", "state_eint_output0",
|
|
"state_eint_output1", "state_rst_output0", "state_rst_output1";
|
|
pinctrl-0 = <&ctp_pins_default>;
|
|
pinctrl-1 = <&ctp_pins_eint_as_int>;
|
|
pinctrl-2 = <&ctp_pins_eint_output0>;
|
|
pinctrl-3 = <&ctp_pins_eint_output1>;
|
|
pinctrl-4 = <&ctp_pins_rst_output0>;
|
|
pinctrl-5 = <&ctp_pins_rst_output1>;
|
|
};
|
|
|
|
&touch {
|
|
tpd-resolution = <720 1500>;
|
|
use-tpd-button = <1>;
|
|
tpd-key-num = <3>;
|
|
tpd-key-local= <139 172 158 0>;
|
|
tpd-key-dim-local = <90 883 100 40 230
|
|
883 100 40 370 883 100 40 0 0 0 0>;
|
|
tpd-max-touch-num = <5>;
|
|
tpd-filter-enable = <0>;
|
|
tpd-filter-pixel-density = <146>;
|
|
tpd-filter-custom-prameters = <0 0 0 0 0 0 0 0 0 0 0 0>;
|
|
tpd-filter-custom-speed = <0 0 0>;
|
|
pinctrl-names = "default", "state_eint_as_int", "state_eint_output0",
|
|
"state_eint_output1", "state_rst_output0", "state_rst_output1";
|
|
pinctrl-0 = <&ctp_pins_default>;
|
|
pinctrl-1 = <&ctp_pins_eint_as_int>;
|
|
pinctrl-2 = <&ctp_pins_eint_output0>;
|
|
pinctrl-3 = <&ctp_pins_eint_output1>;
|
|
pinctrl-4 = <&ctp_pins_rst_output0>;
|
|
pinctrl-5 = <&ctp_pins_rst_output1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&keypad {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&kpd_pins_default>;
|
|
};
|
|
|
|
&pio {
|
|
kpd_pins_default: kpdgpiodefault {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO93__FUNC_KPCOL0>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
output-low;
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
ctp_pins_default: eint0default {
|
|
};
|
|
ctp_pins_eint_as_int: eint1touch@0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
ctp_pins_eint_output0: eintoutput0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
ctp_pins_eint_output1: eintoutput1 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
ctp_pins_rst_output0: rstoutput0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO174__FUNC_GPIO174>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
ctp_pins_rst_output1: rstoutput1 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO174__FUNC_GPIO174>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
/* TOUCH end */
|
|
&accdet {
|
|
accdet-mic-vol = <6>;
|
|
headset-mode-setting = <0x500 0x500 1 0x1f0 0x800 0x800 0x20 0x44>;
|
|
accdet-plugout-debounce = <1>;
|
|
accdet-mic-mode = <2>;
|
|
headset-eint-level-pol = <8>;
|
|
headset-three-key-threshold = <0 80 220 400>;
|
|
headset-three-key-threshold-CDD = <0 121 192 600>;
|
|
headset-four-key-threshold = <0 58 121 192 400>;
|
|
pinctrl-names = "default", "state_eint_as_int";
|
|
pinctrl-0 = <&accdet_pins_default>;
|
|
pinctrl-1 = <&accdet_pins_eint_as_int>;
|
|
status = "okay";
|
|
};
|
|
&pio {
|
|
accdet_pins_default: accdetdefault {
|
|
};
|
|
accdet_pins_eint_as_int: accdeteint@0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
/* CONSYS GPIO standardization */
|
|
&pio {
|
|
consys_pins_default: consys_default {
|
|
};
|
|
gpslna_pins_init: gpslna@0 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO91__FUNC_GPIO91>;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
output-low;
|
|
};
|
|
};
|
|
gpslna_pins_oh: gpslna@1 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO91__FUNC_GPIO91>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
gpslna_pins_ol: gpslna@2 {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO91__FUNC_GPIO91>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
};
|
|
&consys {
|
|
pinctrl-names = "default", "gps_lna_state_init",
|
|
"gps_lna_state_oh", "gps_lna_state_ol";
|
|
pinctrl-0 = <&consys_pins_default>;
|
|
pinctrl-1 = <&gpslna_pins_init>;
|
|
pinctrl-2 = <&gpslna_pins_oh>;
|
|
pinctrl-3 = <&gpslna_pins_ol>;
|
|
status = "okay";
|
|
};
|
|
/* CONSYS end */
|
|
|
|
/* AUDIO GPIO standardization */
|
|
&audgpio {
|
|
pinctrl-names = "aud_clk_mosi_off",
|
|
"aud_clk_mosi_on",
|
|
"aud_clk_miso_off",
|
|
"aud_clk_miso_on",
|
|
"aud_dat_mosi_off",
|
|
"aud_dat_mosi_on",
|
|
"aud_dat_miso_off",
|
|
"aud_dat_miso_on",
|
|
"extamp-pullhigh",
|
|
"extamp-pulllow";
|
|
pinctrl-0 = <&aud_clk_mosi_off>;
|
|
pinctrl-1 = <&aud_clk_mosi_on>;
|
|
pinctrl-2 = <&aud_clk_miso_off>;
|
|
pinctrl-3 = <&aud_clk_miso_on>;
|
|
pinctrl-4 = <&aud_dat_mosi_off>;
|
|
pinctrl-5 = <&aud_dat_mosi_on>;
|
|
pinctrl-6 = <&aud_dat_miso_off>;
|
|
pinctrl-7 = <&aud_dat_miso_on>;
|
|
pinctrl-8 = <&aud_pins_extamp_high>;
|
|
pinctrl-9 = <&aud_pins_extamp_low>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
aud_clk_mosi_off: aud_clk_mosi_off {
|
|
pins_cmd0_dat {
|
|
pinmux = <PINMUX_GPIO136__FUNC_GPIO136>;
|
|
};
|
|
};
|
|
|
|
aud_clk_mosi_on: aud_clk_mosi_on {
|
|
pins_cmd0_dat {
|
|
pinmux = <PINMUX_GPIO136__FUNC_AUD_CLK_MOSI>;
|
|
};
|
|
};
|
|
|
|
aud_clk_miso_off: aud_clk_miso_off {
|
|
pins_cmd0_dat {
|
|
pinmux = <PINMUX_GPIO140__FUNC_GPIO140>;
|
|
};
|
|
};
|
|
|
|
aud_clk_miso_on: aud_clk_miso_on {
|
|
pins_cmd0_dat {
|
|
pinmux = <PINMUX_GPIO140__FUNC_AUD_CLK_MISO>;
|
|
};
|
|
};
|
|
|
|
aud_dat_mosi_off: aud_dat_mosi_off {
|
|
pins_cmd1_dat {
|
|
pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
|
|
input-enable;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
pins_cmd2_dat {
|
|
pinmux = <PINMUX_GPIO139__FUNC_GPIO139>;
|
|
input-enable;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
aud_dat_mosi_on: aud_dat_mosi_on {
|
|
pins_cmd1_dat {
|
|
pinmux = <PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0>;
|
|
};
|
|
pins_cmd2_dat {
|
|
pinmux = <PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1>;
|
|
};
|
|
};
|
|
|
|
aud_dat_miso_off: aud_dat_miso_off {
|
|
pins_cmd1_dat {
|
|
pinmux = <PINMUX_GPIO142__FUNC_GPIO142>;
|
|
input-enable;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
pins_cmd2_dat {
|
|
pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
|
|
input-enable;
|
|
slew-rate = <0>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
aud_dat_miso_on: aud_dat_miso_on {
|
|
pins_cmd1_dat {
|
|
pinmux = <PINMUX_GPIO142__FUNC_AUD_DAT_MISO0>;
|
|
};
|
|
pins_cmd2_dat {
|
|
pinmux = <PINMUX_GPIO143__FUNC_AUD_DAT_MISO1>;
|
|
};
|
|
};
|
|
|
|
aud_pins_extamp_high: audexamphigh {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
|
|
slew-rate = <1>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
aud_pins_extamp_low: audexamplow {
|
|
pins_cmd_dat {
|
|
pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
|
|
slew-rate = <1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
};
|
|
/* AUDIO end */
|
|
|
|
&msdc1 {
|
|
cd_level = /bits/ 8 <MSDC_CD_HIGH>;
|
|
cd-gpios = <&pio 0 0>;
|
|
};
|
|
|
|
&extcon_usb {
|
|
charger = <&mtk_charger_type>;
|
|
vbus-supply;
|
|
};
|
|
|
|
#include <k61v1_hdp_ref/cust.dtsi>
|
|
#include "cust_mt6761_project_camera.dtsi"
|
|
/*End of this file, DO NOT ADD ANYTHING HERE*/
|