werunplugged/unplugged-kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d30235b04c
unplugged-kernel/drivers/input/touchscreen/NT36672C_I2C/nt36xxx_fw_update.c

1090 lines
26 KiB
C
Raw Blame History

/*
* Copyright (C) 2010 - 2017 Novatek, Inc.
*
* Revision: 15504
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/delay.h>
#include <linux/firmware.h>
#include "nt36xxx.h"
#if BOOT_UPDATE_FIRMWARE
#define FW_BIN_SIZE_116KB 118784
#define FW_BIN_SIZE FW_BIN_SIZE_116KB
#define FW_BIN_VER_OFFSET 0x1A000
#define FW_BIN_VER_BAR_OFFSET 0x1A001
#define FLASH_SECTOR_SIZE 4096
#define SIZE_64KB 65536
#define BLOCK_64KB_NUM 4
const struct firmware *fw_entry;
/*******************************************************
* Description:
* Novatek touchscreen request update firmware function.
*
* return:
* Executive outcomes. 0---succeed. -1,-22---failed.
*******************************************************/
int32_t update_firmware_request(char *filename)
{
int32_t ret = 0;
if (filename == NULL)
return -1;
NVT_LOG("filename is %s\n", filename);
ret = request_firmware(&fw_entry, filename, &ts->client->dev);
if (ret) {
NVT_ERR("firmware load failed, ret=%d\n", ret);
return ret;
}
// check bin file size (116kb)
if (fw_entry->size != FW_BIN_SIZE) {
NVT_ERR("bin file size not match. (%zu)\n", fw_entry->size);
return -EINVAL;
}
// check if FW version add FW version bar equals 0xFF
if (*(fw_entry->data + FW_BIN_VER_OFFSET) +
*(fw_entry->data + FW_BIN_VER_BAR_OFFSET) != 0xFF) {
NVT_ERR("bin file FW_VER + FW_VER_BAR should be 0xFF!\n");
NVT_ERR("FW_VER=0x%02X, FW_VER_BAR=0x%02X\n",
*(fw_entry->data+FW_BIN_VER_OFFSET),
*(fw_entry->data+FW_BIN_VER_BAR_OFFSET));
return -EINVAL;
}
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen release update firmware function.
*
* return:
* n.a.
*******************************************************/
void update_firmware_release(void)
{
if (fw_entry)
release_firmware(fw_entry);
fw_entry = NULL;
}
/*******************************************************
* Description:
* Novatek touchscreen check firmware version function.
*
* return:
* Executive outcomes. 0---need update. 1---need not
* update.
*******************************************************/
int32_t Check_FW_Ver(void)
{
uint8_t buf[16] = {0};
int32_t ret = 0;
//write i2c index to EVENT BUF ADDR
buf[0] = 0xFF;
buf[1] = (ts->mmap->EVENT_BUF_ADDR >> 16) & 0xFF;
buf[2] = (ts->mmap->EVENT_BUF_ADDR >> 8) & 0xFF;
ret = CTP_I2C_WRITE(ts->client, I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("i2c write error!(%d)\n", ret);
return ret;
}
//read Firmware Version
buf[0] = EVENT_MAP_FWINFO;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("i2c read error!(%d)\n", ret);
return ret;
}
NVT_LOG("IC FW Ver = 0x%02X, FW Ver Bar = 0x%02X\n", buf[1], buf[2]);
NVT_LOG("Bin FW Ver = 0x%02X, FW ver Bar = 0x%02X\n",
fw_entry->data[FW_BIN_VER_OFFSET],
fw_entry->data[FW_BIN_VER_BAR_OFFSET]);
// check IC FW_VER + FW_VER_BAR equals 0xFF, need to update if not
if ((buf[1] + buf[2]) != 0xFF) {
NVT_ERR("IC FW_VER + FW_VER_BAR not equals to 0xFF!\n");
return 0;
}
// compare IC and binary FW version
if (buf[1] > fw_entry->data[FW_BIN_VER_OFFSET])
return 1;
else
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen resume from deep power down function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Resume_PD(void)
{
uint8_t buf[8] = {0};
int32_t ret = 0;
int32_t retry = 0;
// Resume Command
buf[0] = 0x00;
buf[1] = 0xAB;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Write Enable error!!(%d)\n", ret);
return ret;
}
// Check 0xAA (Resume Command)
retry = 0;
while (1) {
msleep(20);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA (Resume Command) error!!(%d)\n",
ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Resume Command) error!!\n");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
msleep(20);
NVT_LOG("Resume PD OK\n");
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen check firmware checksum function.
*
* return:
* Executive outcomes. 0---checksum not match.
* 1---checksum match. -1--- checksum read failed.
*******************************************************/
int32_t Check_CheckSum(void)
{
uint8_t buf[64] = {0};
uint32_t XDATA_Addr = ts->mmap->READ_FLASH_CHECKSUM_ADDR;
int32_t ret = 0;
int32_t i = 0;
int32_t k = 0;
uint16_t WR_Filechksum[BLOCK_64KB_NUM] = {0};
uint16_t RD_Filechksum[BLOCK_64KB_NUM] = {0};
size_t fw_bin_size = 0;
size_t len_in_blk = 0;
int32_t retry = 0;
if (Resume_PD()) {
NVT_ERR("Resume PD error!!\n");
return -1;
}
fw_bin_size = fw_entry->size;
for (i = 0; i < BLOCK_64KB_NUM; i++) {
if (fw_bin_size > (i * SIZE_64KB)) {
// Calculate WR_Filechksum of each 64KB block
len_in_blk =
min(fw_bin_size - i * SIZE_64KB,
(size_t)SIZE_64KB);
WR_Filechksum[i] =
i + 0x00 + 0x00 +
(((len_in_blk - 1) >> 8) & 0xFF) +
((len_in_blk - 1) & 0xFF);
for (k = 0; k < len_in_blk; k++) {
WR_Filechksum[i] +=
fw_entry->data[k + i * SIZE_64KB];
}
WR_Filechksum[i] = 65535 - WR_Filechksum[i] + 1;
// Fast Read Command
buf[0] = 0x00;
buf[1] = 0x07;
buf[2] = i;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = ((len_in_blk - 1) >> 8) & 0xFF;
buf[6] = (len_in_blk - 1) & 0xFF;
ret = CTP_I2C_WRITE(ts->client,
I2C_HW_Address, buf, 7);
if (ret < 0) {
NVT_ERR("Fast Read Command error!!(%d)\n",
ret);
return ret;
}
// Check 0xAA (Fast Read Command)
retry = 0;
while (1) {
msleep(80);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client,
I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!\n");
NVT_ERR("Fast Read Command(%d)\n",
ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 5)) {
NVT_ERR("Check 0xAA failed\n");
NVT_ERR("Fast Read Command\n");
NVT_ERR("buf[1]=0x%02X, retry=%d\n",
buf[1], retry);
return -1;
}
}
// Read Checksum (write addr high byte & middle byte)
buf[0] = 0xFF;
buf[1] = XDATA_Addr >> 16;
buf[2] = (XDATA_Addr >> 8) & 0xFF;
ret = CTP_I2C_WRITE(ts->client,
I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Read Checksum error!!\n");
NVT_ERR("write addr high & middle byte(%d)\n",
ret);
return ret;
}
// Read Checksum
buf[0] = (XDATA_Addr) & 0xFF;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client,
I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Read Checksum error!!(%d)\n", ret);
return ret;
}
RD_Filechksum[i] = (uint16_t)((buf[2] << 8) | buf[1]);
if (WR_Filechksum[i] != RD_Filechksum[i]) {
NVT_ERR("RD_Filechksum[%d]=0x%04X\n",
i, RD_Filechksum[i]);
NVT_ERR("WR_Filechksum[%d]=0x%04X\n",
i, WR_Filechksum[i]);
NVT_ERR("firmware checksum not match!!\n");
return 0;
}
}
}
NVT_LOG("firmware checksum match\n");
return 1;
}
/*******************************************************
* Description:
* Novatek touchscreen initial bootloader and flash
* block function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Init_BootLoader(void)
{
uint8_t buf[64] = {0};
int32_t ret = 0;
int32_t retry = 0;
// SW Reset & Idle
nvt_sw_reset_idle();
// Initiate Flash Block
buf[0] = 0x00;
buf[1] = 0x00;
buf[2] = I2C_FW_Address;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Inittial Flash Block error!!(%d)\n", ret);
return ret;
}
// Check 0xAA (Initiate Flash Block)
retry = 0;
while (1) {
msleep(20);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA(Inittial Flash Block) error(%d)\n",
ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Inittial Flash Block) error!!\n");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
NVT_LOG("Init OK\n");
msleep(20);
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen erase flash sectors function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Erase_Flash(void)
{
uint8_t buf[64] = {0};
int32_t ret = 0;
int32_t count = 0;
int32_t i = 0;
int32_t Flash_Address = 0;
int32_t retry = 0;
// Write Enable
buf[0] = 0x00;
buf[1] = 0x06;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Write Enable error!!\n");
NVT_ERR("for Write Status Register(%d)\n", ret);
return ret;
}
// Check 0xAA (Write Enable)
retry = 0;
while (1) {
mdelay(1);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!(%d)\n");
NVT_ERR("Write Enable for Write Status Register(%d)\n",
ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA error!!\n");
NVT_ERR("Write Enable for Write Status Register\n");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
// Write Status Register
buf[0] = 0x00;
buf[1] = 0x01;
buf[2] = 0x00;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Write Status Register error!!(%d)\n", ret);
return ret;
}
// Check 0xAA (Write Status Register)
retry = 0;
while (1) {
mdelay(1);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!\n");
NVT_ERR("Write Status Register (%d)\n", ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Write Status Register) error!\n");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
// Read Status
retry = 0;
while (1) {
mdelay(5);
buf[0] = 0x00;
buf[1] = 0x05;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Read Status error!!\n");
NVT_ERR("for Write Status Register(%d)\n", ret);
return ret;
}
// Check 0xAA (Read Status)
buf[0] = 0x00;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!(%d)\n");
NVT_ERR("Read Status for Write Status Register(%d)\n",
ret);
return ret;
return ret;
}
if ((buf[1] == 0xAA) && (buf[2] == 0x00))
break;
retry++;
if (unlikely(retry > 100)) {
NVT_ERR("Check 0xAA failed\n");
NVT_ERR("Read Status for Write Status Register\n");
NVT_ERR("buf[1]=0x%02X, buf[2]=0x%02X, retry=%d\n",
buf[1], buf[2], retry);
return -1;
}
}
if (fw_entry->size % FLASH_SECTOR_SIZE)
count = fw_entry->size / FLASH_SECTOR_SIZE + 1;
else
count = fw_entry->size / FLASH_SECTOR_SIZE;
for (i = 0; i < count; i++) {
// Write Enable
buf[0] = 0x00;
buf[1] = 0x06;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Write Enable error!!(%d,%d)\n", ret, i);
return ret;
}
// Check 0xAA (Write Enable)
retry = 0;
while (1) {
mdelay(1);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA (Write Enable) error!!\n");
NVT_ERR("(%d,%d)\n", ret, i);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Write Enable) error!!");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
Flash_Address = i * FLASH_SECTOR_SIZE;
// Sector Erase
buf[0] = 0x00;
buf[1] = 0x20; // Command : Sector Erase
buf[2] = ((Flash_Address >> 16) & 0xFF);
buf[3] = ((Flash_Address >> 8) & 0xFF);
buf[4] = (Flash_Address & 0xFF);
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 5);
if (ret < 0) {
NVT_ERR("Sector Erase error!!(%d,%d)\n", ret, i);
return ret;
}
// Check 0xAA (Sector Erase)
retry = 0;
while (1) {
mdelay(1);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA (Sector Erase) error!!\n");
NVT_ERR("(%d,%d)\n", ret, i);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Sector Erase) failed\n");
NVT_ERR("buf[1]=0x%02X, retry=%d\n",
buf[1], retry);
return -1;
}
}
// Read Status
retry = 0;
while (1) {
mdelay(5);
buf[0] = 0x00;
buf[1] = 0x05;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Read Status error!!(%d,%d)\n",
ret, i);
return ret;
}
// Check 0xAA (Read Status)
buf[0] = 0x00;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Check 0xAA (Read Status) error!!\n");
NVT_ERR("(%d,%d)\n", ret, i);
return ret;
}
if ((buf[1] == 0xAA) && (buf[2] == 0x00))
break;
retry++;
if (unlikely(retry > 100)) {
NVT_ERR("Check 0xAA (Read Status) failed\n");
NVT_ERR("b[1]=0x%02X,b[2]=0x%02X,retry=%d\n",
buf[1], buf[2], retry);
return -1;
}
}
}
NVT_LOG("Erase OK\n");
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen write flash sectors function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Write_Flash(void)
{
uint8_t buf[64] = {0};
uint32_t XDATA_Addr = ts->mmap->RW_FLASH_DATA_ADDR;
uint32_t Flash_Address = 0;
int32_t i = 0, j = 0, k = 0;
uint8_t tmpvalue = 0;
int32_t count = 0;
int32_t ret = 0;
int32_t retry = 0;
// change I2C buffer index
buf[0] = 0xFF;
buf[1] = XDATA_Addr >> 16;
buf[2] = (XDATA_Addr >> 8) & 0xFF;
ret = CTP_I2C_WRITE(ts->client, I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("change I2C buffer index error!!(%d)\n", ret);
return ret;
}
if (fw_entry->size % 256)
count = fw_entry->size / 256 + 1;
else
count = fw_entry->size / 256;
for (i = 0; i < count; i++) {
Flash_Address = i * 256;
// Write Enable
buf[0] = 0x00;
buf[1] = 0x06;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Write Enable error!!(%d)\n", ret);
return ret;
}
// Check 0xAA (Write Enable)
retry = 0;
while (1) {
udelay(100);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA (Write Enable) error!!\n");
NVT_ERR("(%d,%d)\n", ret, i);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Write Enable) error!!");
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
}
// Write Page : 256 bytes
for (j = 0;
j < min(fw_entry->size - i * 256, (size_t)256);
j += 32) {
buf[0] = (XDATA_Addr + j) & 0xFF;
for (k = 0; k < 32; k++) {
buf[1 + k] =
fw_entry->data[Flash_Address + j + k];
}
ret = CTP_I2C_WRITE(ts->client,
I2C_BLDR_Address, buf, 33);
if (ret < 0) {
NVT_ERR("Write Page error!!(%d), j=%d\n",
ret, j);
return ret;
}
}
if (fw_entry->size - Flash_Address >= 256)
tmpvalue = (Flash_Address >> 16) +
((Flash_Address >> 8) & 0xFF) +
(Flash_Address & 0xFF) + 0x00 + (255);
else
tmpvalue = (Flash_Address >> 16) +
((Flash_Address >> 8) & 0xFF) +
(Flash_Address & 0xFF) + 0x00 +
(fw_entry->size - Flash_Address - 1);
for (k = 0; k < min(fw_entry->size - Flash_Address,
(size_t)256); k++)
tmpvalue += fw_entry->data[Flash_Address + k];
tmpvalue = 255 - tmpvalue + 1;
// Page Program
buf[0] = 0x00;
buf[1] = 0x02;
buf[2] = ((Flash_Address >> 16) & 0xFF);
buf[3] = ((Flash_Address >> 8) & 0xFF);
buf[4] = (Flash_Address & 0xFF);
buf[5] = 0x00;
buf[6] = min(fw_entry->size - Flash_Address, (size_t)256) - 1;
buf[7] = tmpvalue;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 8);
if (ret < 0) {
NVT_ERR("Page Program error!!(%d), i=%d\n", ret, i);
return ret;
}
// Check 0xAA (Page Program)
retry = 0;
while (1) {
mdelay(1);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Page Program error!!(%d)\n", ret);
return ret;
}
if (buf[1] == 0xAA || buf[1] == 0xEA)
break;
retry++;
if (unlikely(retry > 20)) {
NVT_ERR("Check 0xAA (Page Program) failed");
NVT_ERR("buf[1]=0x%02X, retry=%d\n",
buf[1], retry);
return -1;
}
}
if (buf[1] == 0xEA) {
NVT_ERR("Page Program error!! i=%d\n", i);
return -3;
}
// Read Status
retry = 0;
while (1) {
mdelay(5);
buf[0] = 0x00;
buf[1] = 0x05;
ret = CTP_I2C_WRITE(ts->client,
I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Read Status error!!(%d)\n", ret);
return ret;
}
// Check 0xAA (Read Status)
buf[0] = 0x00;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!\n");
NVT_ERR("Read Status(%d)\n", ret);
return ret;
}
if (((buf[1] == 0xAA) &&
(buf[2] == 0x00)) ||
(buf[1] == 0xEA)) {
break;
}
retry++;
if (unlikely(retry > 100)) {
NVT_ERR("Check 0xAA (Read Status) failed\n");
NVT_ERR("b[1]=0x%02X,b[2]=0x%02X,retry=%d\n",
buf[1], buf[2], retry);
return -1;
}
}
if (buf[1] == 0xEA) {
NVT_ERR("Page Program error!! i=%d\n", i);
return -4;
}
NVT_LOG("Programming...%2d%%\r", ((i * 100) / count));
}
NVT_LOG("Programming...%2d%%\r", 100);
NVT_LOG("Program OK\n");
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen verify checksum of written
* flash function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Verify_Flash(void)
{
uint8_t buf[64] = {0};
uint32_t XDATA_Addr = ts->mmap->READ_FLASH_CHECKSUM_ADDR;
int32_t ret = 0;
int32_t i = 0;
int32_t k = 0;
uint16_t WR_Filechksum[BLOCK_64KB_NUM] = {0};
uint16_t RD_Filechksum[BLOCK_64KB_NUM] = {0};
size_t fw_bin_size = 0;
size_t len_in_blk = 0;
int32_t retry = 0;
fw_bin_size = fw_entry->size;
for (i = 0; i < BLOCK_64KB_NUM; i++) {
if (fw_bin_size > (i * SIZE_64KB)) {
// Calculate WR_Filechksum of each 64KB block
len_in_blk = min(fw_bin_size - i * SIZE_64KB,
(size_t)SIZE_64KB);
WR_Filechksum[i] =
i + 0x00 + 0x00 +
(((len_in_blk - 1) >> 8) & 0xFF) +
((len_in_blk - 1) & 0xFF);
for (k = 0; k < len_in_blk; k++) {
WR_Filechksum[i] +=
fw_entry->data[k + i * SIZE_64KB];
}
WR_Filechksum[i] = 65535 - WR_Filechksum[i] + 1;
// Fast Read Command
buf[0] = 0x00;
buf[1] = 0x07;
buf[2] = i;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = ((len_in_blk - 1) >> 8) & 0xFF;
buf[6] = (len_in_blk - 1) & 0xFF;
ret = CTP_I2C_WRITE(ts->client,
I2C_HW_Address, buf, 7);
if (ret < 0) {
NVT_ERR("Fast Read Command error!!(%d)\n",
ret);
return ret;
}
// Check 0xAA (Fast Read Command)
retry = 0;
while (1) {
msleep(80);
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client,
I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA error!!(%d)\n",
ret);
return ret;
}
if (buf[1] == 0xAA)
break;
retry++;
if (unlikely(retry > 5)) {
NVT_ERR("Check 0xAA failed\n");
NVT_ERR("buf[1]=0x%02X, retry=%d\n",
buf[1], retry);
return -1;
}
}
// Read Checksum (write addr high byte & middle byte)
buf[0] = 0xFF;
buf[1] = XDATA_Addr >> 16;
buf[2] = (XDATA_Addr >> 8) & 0xFF;
ret = CTP_I2C_WRITE(ts->client,
I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Read Checksum error!!\n");
NVT_ERR("write addr high & middle byte (%d)\n",
ret);
return ret;
}
// Read Checksum
buf[0] = (XDATA_Addr) & 0xFF;
buf[1] = 0x00;
buf[2] = 0x00;
ret = CTP_I2C_READ(ts->client,
I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("Read Checksum error!!(%d)\n", ret);
return ret;
}
RD_Filechksum[i] = (uint16_t)((buf[2] << 8) | buf[1]);
if (WR_Filechksum[i] != RD_Filechksum[i]) {
NVT_ERR("Verify Fail%d!!\n", i);
NVT_ERR("RD_Filechksum[%d]=0x%04X\n",
i, RD_Filechksum[i]);
NVT_ERR("WR_Filechksum[%d]=0x%04X\n",
i, WR_Filechksum[i]);
return -1;
}
}
}
NVT_LOG("Verify OK\n");
return 0;
}
/*******************************************************
* Description:
* Novatek touchscreen update firmware function.
*
* return:
* Executive outcomes. 0---succeed. negative---failed.
*******************************************************/
int32_t Update_Firmware(void)
{
int32_t ret = 0;
// Step 1 : initial bootloader
ret = Init_BootLoader();
if (ret)
return ret;
// Step 2 : Resume PD
ret = Resume_PD();
if (ret)
return ret;
// Step 3 : Erase
ret = Erase_Flash();
if (ret)
return ret;
// Step 4 : Program
ret = Write_Flash();
if (ret)
return ret;
// Step 5 : Verify
ret = Verify_Flash();
if (ret)
return ret;
//Step 6 : Bootloader Reset
nvt_bootloader_reset();
nvt_check_fw_reset_state(RESET_STATE_INIT);
return ret;
}
/*******************************************************
* Description:
* Novatek touchscreen check flash end flag function.
*
* return:
* Executive outcomes. 0---succeed. 1,negative---failed.
*******************************************************/
#define NVT_FLASH_END_FLAG_LEN 3
#define NVT_FLASH_END_FLAG_ADDR 0x1AFFD
int32_t nvt_check_flash_end_flag(void)
{
uint8_t buf[8] = {0};
uint8_t nvt_end_flag[NVT_FLASH_END_FLAG_LEN + 1] = {0};
int32_t ret = 0;
// Step 1 : initial bootloader
ret = Init_BootLoader();
if (ret)
return ret;
// Step 2 : Resume PD
ret = Resume_PD();
if (ret)
return ret;
// Step 3 : unlock
buf[0] = 0x00;
buf[1] = 0x35;
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("write unlock error!!(%d)\n", ret);
return ret;
}
msleep(20);
//Step 4 : Flash Read Command
buf[0] = 0x00;
buf[1] = 0x03;
buf[2] = (NVT_FLASH_END_FLAG_ADDR >> 16) & 0xFF; //Addr_H
buf[3] = (NVT_FLASH_END_FLAG_ADDR >> 8) & 0xFF; //Addr_M
buf[4] = NVT_FLASH_END_FLAG_ADDR & 0xFF; //Addr_L
buf[5] = (NVT_FLASH_END_FLAG_LEN >> 8) & 0xFF; //Len_H
buf[6] = NVT_FLASH_END_FLAG_LEN & 0xFF; //Len_L
ret = CTP_I2C_WRITE(ts->client, I2C_HW_Address, buf, 7);
if (ret < 0) {
NVT_ERR("write Read Command error!!(%d)\n", ret);
return ret;
}
msleep(20);
// Check 0xAA (Read Command)
buf[0] = 0x00;
buf[1] = 0x00;
ret = CTP_I2C_READ(ts->client, I2C_HW_Address, buf, 2);
if (ret < 0) {
NVT_ERR("Check 0xAA (Read Command) error!!(%d)\n", ret);
return ret;
}
if (buf[1] != 0xAA) {
NVT_ERR("Check 0xAA (Read Command) error!!\n", buf[1]);
NVT_ERR("status=0x%02X\n", buf[1]);
return -1;
}
msleep(20);
//Step 5 : Read Flash Data
buf[0] = 0xFF;
buf[1] = (ts->mmap->READ_FLASH_CHECKSUM_ADDR >> 16) & 0xFF;
buf[2] = (ts->mmap->READ_FLASH_CHECKSUM_ADDR >> 8) & 0xFF;
ret = CTP_I2C_WRITE(ts->client, I2C_BLDR_Address, buf, 3);
if (ret < 0) {
NVT_ERR("change index error!! (%d)\n", ret);
return ret;
}
msleep(20);
// Read Back
buf[0] = ts->mmap->READ_FLASH_CHECKSUM_ADDR & 0xFF;
ret = CTP_I2C_READ(ts->client, I2C_BLDR_Address, buf, 6);
if (ret < 0) {
NVT_ERR("Read Back error!! (%d)\n", ret);
return ret;
}
//buf[3:5] => NVT End Flag
strncpy(nvt_end_flag, &buf[3], NVT_FLASH_END_FLAG_LEN);
NVT_LOG("nvt_end_flag=%s (%02X %02X %02X)\n",
nvt_end_flag, buf[3], buf[4], buf[5]);
if (strncmp(nvt_end_flag, "NVT", 3) == 0)
return 0;
NVT_ERR("\"NVT\" end flag not found!\n");
return 1;
}
/*******************************************************
* Description:
* Novatek touchscreen update firmware when booting
* function.
*
* return:
* n.a.
*******************************************************/
void Boot_Update_Firmware(struct work_struct *work)
{
int32_t ret = 0;
char firmware_name[256] = "";
sprintf(firmware_name, BOOT_UPDATE_FIRMWARE_NAME);
// request bin file in "/etc/firmware"
ret = update_firmware_request(firmware_name);
if (ret) {
NVT_ERR("update_firmware_request failed. (%d)\n", ret);
return;
}
mutex_lock(&ts->lock);
nvt_sw_reset_idle();
ret = Check_CheckSum();
if (ret < 0) { // read firmware checksum failed
NVT_ERR("read firmware checksum failed\n");
Update_Firmware();
} else if ((ret == 0) && (Check_FW_Ver() == 0)) {
// (fw checksum not match) && (bin fw version >= ic fw version)
NVT_LOG("firmware version not match\n");
Update_Firmware();
} else if (nvt_check_flash_end_flag()) {
NVT_LOG("check flash end flag failed\n");
Update_Firmware();
} else {
// Bootloader Reset
nvt_bootloader_reset();
ret = nvt_check_fw_reset_state(RESET_STATE_INIT);
if (ret) {
NVT_LOG("check fw reset state failed\n");
Update_Firmware();
}
}
mutex_unlock(&ts->lock);
update_firmware_release();
}
#endif /* BOOT_UPDATE_FIRMWARE */
Reference in New Issue View Git Blame Copy Permalink