1920 lines
92 KiB
Plaintext
1920 lines
92 KiB
Plaintext
Each utility has its own version number, date of last change and
|
|
some description at the top of its ".c" file. All utilities in the main
|
|
directory have their own "man" pages. There is also a sg3_utils man page.
|
|
|
|
Changelog for pre-release sg3_utils-1.48 [20221112] [svn: r983]
|
|
- some utilities: add experimental --json[=JO] option
|
|
- sg_z_act_query: new utility for sending either a
|
|
Zone activate or Zone query command
|
|
- sg_rep_density: new utility for decoding the response of
|
|
Report density support command [ssc (tape)]
|
|
- sg_rem_rest_elem: new utility for removing or restoring
|
|
elements
|
|
- sg_rtpg: https://github.com/hreinecke/sg3_utils/pull/79
|
|
applied
|
|
- rescan-scsi-bus.sh: with '-r' it crashed due to change in
|
|
rev 867 in sg_inq.c from Device_type= to PDT= .
|
|
Change script to use either
|
|
- undo regression in rev 815 that added newline after
|
|
each LUN in the default (no option) output
|
|
- rev 815 changed the order of listing hosts from
|
|
numeric to alphabetical, change it back to numeric
|
|
- https://github.com/doug-gilbert/sg3_utils/pull/17
|
|
applied with tweaks: add timeout parameter
|
|
- clean $norm handling
|
|
- fix handling of '-I <secs>' option
|
|
- sgdevice26: do not traverse sg class if scsi_device
|
|
is not added
|
|
- add -no-lip-scan option
|
|
- https://github.com/doug-gilbert/sg3_utils/pull/21
|
|
- speed testonline() when peripheral_qualifier != 0
|
|
see https://github.com/doug-gilbert/sg3_utils/issues/24
|
|
- speed multipath scans with many LUNs, cache multipath
|
|
LUN info in temporary file, see
|
|
https://github.com/doug-gilbert/sg3_utils/issues/22
|
|
- sg_rep_zones: add Report zone starting LBA granularity
|
|
field in REPORT ZONES response [zbc2r12]
|
|
- add --brief option, show part of header and last
|
|
descriptor fetched
|
|
- add --find ZT option to find the first occurrence of
|
|
ZT; if ZT prefixed by - or ! find first not equal to ZT
|
|
- add --statistics option
|
|
- sg_get_elem_status: change '--maxlen=' option default to
|
|
1056 (header plus 32 physical element status descriptors)
|
|
- sg_decode_sense: add --nodecode option
|
|
- sg_logs: tweak the meaning of --list option to more closely
|
|
reflect the contents of log pages 0x0 and 0x0,0xff
|
|
- make '-lll' set union of log pages 0x0 and 0x0,0xff
|
|
- add --exclude option to exclude vendor specific pages
|
|
and parameters
|
|
- add --undefined option for hex format of undefined/
|
|
unrecognized fields
|
|
- for short binary fields, remove address (index) from
|
|
the left hand side of each line of hex
|
|
- improve 'last_n' log pages; supply VPD and mode pages
|
|
with their name (if T10 defined)
|
|
- update names for TapeAlert lpage
|
|
- allow --page selection with --inhex=FN
|
|
- sg_modes: improve handling of zbc disks with pdt=0x14
|
|
- sg_inq, sg_vpd: merge VPD page processing for T10
|
|
defined pages, VS pages still differ
|
|
- Device Identication VPD page, change
|
|
"IEEE Company_id" to "AOI" as per spc6r06.pdf
|
|
- add support for Hitachi/HP open-v ldev names
|
|
- sg_vpd: apply github pull 18 (missing LF)
|
|
- add --sinq_inraw=RFN option
|
|
- sg_opcodes: cleanup error reporting
|
|
- add --inhex=FN to process earlier -HHH
|
|
- sg_format: allow disk formats on ZBC (zoned) disks
|
|
- sg_read_buffer: add --eh_code= and --no_output options
|
|
- sg_ses: add exp_sas_addr acronym for getting expander's
|
|
SAS address
|
|
- sg_turs: change nanosleep() to Sleep() in MinGW
|
|
- see sg_lib below for two new exit status values
|
|
- sg_stream_ctl: fix --get indexing
|
|
- sg_read_block_limits: fix granularity value
|
|
- add --mloi option
|
|
- inhex/logs_last_n.hex: new, tests for the 4 "Last n ..."
|
|
log (sub)pages
|
|
- sg_lib: add sg_pdt_s_eq() to cope with ZBC disks which may
|
|
be either PDT_ZBC (if host managed) or PDT_DISK
|
|
- add hex2fp(), similar to hex2str() but outputs to FILE
|
|
- cleanup masks for PDT [0x1f] and group_number [0x3f]
|
|
- new sg_json_builder.[hc] files local to lib folder
|
|
- document internal json interface in include/sg_pr2serr.h
|
|
- add SG_C_CPP_ZERO_INIT to better handle aggregate stack
|
|
instance zeroing (C23 adding 'struct T t {};' will help)
|
|
- correct fixed format sense data command-specific field
|
|
for ata-passthrough (lba field), see:
|
|
https://github.com/doug-gilbert/sg3_utils/pull/25
|
|
- add sg_ll_read_block_limits_v2() for MLOI bit
|
|
- https://github.com/doug-gilbert/sg3_utils/pull/32 added
|
|
with tweaks; adds SG_LIB_CAT_STANDBY and
|
|
SG_LIB_CAT_UNAVAILABLE which refine the 'not ready'
|
|
exit status. Useful for sg_turs
|
|
- initialize all sense buffers to 0
|
|
- linux: replace references to /proc/scsi/sg with
|
|
/sys/module/sg/parameters/
|
|
- rework main README file
|
|
- rev 921+922 are bugfix revs on release 1.47 [r919,920]
|
|
- configure.ac: map msys to mingw
|
|
- repeat tweak to accept uclinux as linux
|
|
- sg_dd: change uint type to uint32_t
|
|
- remove unused out2_off in main()
|
|
- sg_pt_dummy.c: remove problematic include
|
|
- sg3_utils.spec: change tarball extension from .tgz to
|
|
.tar.gz ; fix build issue with Fedora 36
|
|
- build cleanups for 'make distcheck', see
|
|
https://github.com/doug-gilbert/sg3_utils/pull/26, 27 and
|
|
28; need svn:ignore property or maybe global-ignores
|
|
- round of coverity identified issue fixes (and non-issues)
|
|
- autoconf: upgrade version 2.70 to 2.71; automake upgrade
|
|
to version 1.16.5 (from Fedora 36)
|
|
- remove archive directory (and its contents)
|
|
- codespell fixes
|
|
|
|
Changelog for released sg3_utils-1.47 [20211110] [svn: r919]
|
|
- sg_rep_zones: add support for REPORT ZONE DOMAINS and
|
|
REPORT REALMS in this utility
|
|
- sg_raw: fix prints of NVMe NVM command names
|
|
- sg_ses: fix Windows problem "No command (cdb) given"
|
|
- fix crash when '-m LEN' < 252
|
|
- guard against smaller '--maxlen=' values
|
|
- sg_logs: additions to Volume statistics lpage [ssc5r05c]
|
|
- additions to Command duration limits statistics log
|
|
page [spc6r06]
|
|
- sg_vpd: fix do_hex type on some recent pages
|
|
- zoned block dev char vpd: add zone alignment mode and
|
|
zone starting LBA granularity [zbc2r11]
|
|
- sg_read_buffer: fix --length= problem
|
|
- sg_dd, sgm_dd, sgp_dd: don't close negative file descriptors
|
|
- sg_dd: srand48_r() and mrand48_r() are GNU libc specific,
|
|
put conditional in so non-reentrant version used otherwise
|
|
- 'iflag=00,ff' places the 32 bit block address (big endian)
|
|
into each block
|
|
- sgp_dd: major rework, fix issue with error being ignored
|
|
- new: --chkaddr which checks for block address in each block
|
|
- add check for stdatomic.h presence in configure.ac
|
|
- sg_xcopy: tweak CSCD identification descriptor
|
|
- sg_get_elem_status: fix issue with '--maxlen=' option
|
|
- add 2 depopulation revocation health attributes [sbc5r01]
|
|
- transport error handling improved. To fix report of a
|
|
BAD_TARGET transport error but the utility still continued.
|
|
- introduce SG_LIB_TRANSPORT_ERROR [35] exit status
|
|
- several utilities: override '--maxlen=LEN' when LEN
|
|
is < 16 (or 4), take default (or 4) instead
|
|
- scripts: 55-scsi-sg3_id.rules remove outdated rule
|
|
- sg_lib: add sg_scsi_status_is_good(),
|
|
sg_scsi_status_is_bad() and sg_get_zone_type_str()
|
|
- pt_linux: fix verify(BytChk=0) which Linux SNTL translated
|
|
to write, other SNTL cleanups
|
|
- pt_linux_nvme: fix fua setting
|
|
- pt: check_pt_file_handle() add return value of 5 for
|
|
FreeBSD for nvme(cam)
|
|
- pt: new configure option --enable-pt_dummy builds the
|
|
library with sg_pt_dummy.c instead of OS specific code;
|
|
for experimenting with --inhex= decoding on netbsd
|
|
- pt: add Haiku OS support
|
|
- gcc -fanalyzer fixes: in sg_pt_linux.c + sg_write_x.c
|
|
- sg_pt_dummy.c: add list of functions that a new pt
|
|
needs to define
|
|
- configure.ac: tweak to accept uclinux as linux
|
|
- move some hex files from examples to inhex directory
|
|
- major rework of lib/sg_pt_freebsd.c; make SNTL as similar
|
|
as practical to the Linux implementation
|
|
- add testing/sg_take_snap
|
|
- change links to http://sg.danny/cz/sg/* to https
|
|
|
|
Changelog for released sg3_utils-1.46 [20210329] [svn: r891]
|
|
- sg_rep_pip: new utility: report provisioning initialization
|
|
pattern command
|
|
- sg_turs: estimated time-to-ready [spc6r03]
|
|
- add --delay=MS option
|
|
- sg_requests: substantial cleanup
|
|
- sg_vpd: add Format presets and Concurrent positioning ranges
|
|
- add hot-pluggable field in standard Inquiry [spc6r05]
|
|
- fix vendor struct opts_t alignment
|
|
- sg_inq: add hot-pluggable field in standard Inquiry
|
|
- sg_dd: --verify : separate category for miscompare errors
|
|
- --verify : oflag=coe continue on miscompares, counts them
|
|
- add cdl= operand for command duration limit indexes
|
|
- add oflag=nocreat and conv=nocreat : OFILE must exist
|
|
- add iflag=00, ff, random flags
|
|
- setup conditional auto rule for getrandom()
|
|
- add command timeout after comma in time= operand
|
|
- sg_get_elem_status: add ralwd bit sbc4r20a
|
|
- sg_write_x: add dld bits to write(32) [sbc4r19a]
|
|
- sg_rep_zones: print invalid write pointer LBA as -1 rather
|
|
than 16 "f"s
|
|
- sg_opcodes: improve handling of RWCDLP field
|
|
- sg_ses: use fan speed factor field for calculation [ses4r04]
|
|
- add --all (-a) option, same action as --join
|
|
- sg_compare_and_write: add examples section to its manpage
|
|
- sg_modes: document '-s' option (same as '-6')
|
|
- sg_sanitize + sg_format: when --verbose given once report
|
|
probable success; without --verbose 'no news is good news'
|
|
- sg_zone: add Remove element and modify zones command
|
|
- sg_raw: increase maximum data-in and data-out buffer size
|
|
from 64 KB to 1 MB
|
|
- fix --cmdfile= handling
|
|
- add --nvm option to send commands from the NVM command set
|
|
- add --cmdset option to bypass cdb heuristic
|
|
- add --scan= first_opcode,last_opcode
|
|
- sg_pt_freebsd: allow device names without leading /dev/
|
|
thus fix for regression introduced in rev 731 (ver: 1.43)
|
|
- sg_pt_solaris+sg_pt_osf1: fix problem with clear_scsi_pt_obj()
|
|
which needs to remember is_nvme and dev_fd values
|
|
- sg_lib: add ZBC (2020) feature set entries
|
|
- sg_lib: restore elements and rebuild command added
|
|
- sg_lib,sg_pt: add partial_clear_scsi_pt_obj(),
|
|
get_scsi_pt_cdb_len() and get_scsi_pt_cdb_buf()
|
|
- add do_nvm_pt() for the NVM (sub-)command set
|
|
- tweak transport error handling in Linux
|
|
- sg_lib: Linux NVMe SNTL: add read, write and verify;
|
|
synchronize cache and write same translations
|
|
- add dummy start stop unit and test unit ready commands
|
|
- wire cache mpage's WCE to nvme 'volatile write cache'
|
|
- fix crash in sg_f2hex_arr() when fname not found
|
|
- sg_lib: reprint cdb with illegal request sense key
|
|
- asc/ascq match asc-num.txt @t10 20200708 [spc6r02]
|
|
- gcc-10: suppress warnings
|
|
- autoconf: upgrade version 2.69 to 2.70
|
|
- remove space from end of source lines for git-svn
|
|
- testing/sg_mrq_testing: new, for blocking mrq usage
|
|
- testing/sgs_dd: add evfd flags and eventfd processing
|
|
- testing: remove master-slave terminology for sgv4
|
|
- examples: add nvme_read_ctl.hex and nvme_write_ctl.hex
|
|
|
|
Changelog for released sg3_utils-1.45 [20200229] [svn: r843]
|
|
- sg_get_elem_status: new utility [sbc4r16]
|
|
- sg_ses: bug: --page= being overridden when --control and --data= also
|
|
given; fix
|
|
- document explicit Element type codes and example
|
|
- rename 'SAS SlimLine' to SlimSAS [ses4r02]
|
|
- add --inhex=FN, equivalent to --data=@FN, for compatibility with
|
|
other utilities
|
|
- 'fan speed factor' field added in 20-013r1
|
|
- sg_opcodes: expand MLU (now 2 bits, spc5r20)
|
|
- include RWCDLP field as extension of CDLP field (spc5r01)
|
|
- sg_write_buffer: allow comma and period separated lists when input
|
|
from stdin
|
|
- sg_inq: update version descriptors to spc5r21
|
|
- add some NVMe 1.4 snippets to ctl identify
|
|
- sg_format: add --dcrt used twice (FOV=1 DCRT=0)
|
|
- add support for FORMAT WITH PRESET (sbc4r18)
|
|
- sg_raw: fix --send bug when using stdin
|
|
- sg_vpd: 3pc VPD page add copy group descriptor
|
|
- add --examine option
|
|
- new zoned block device char. page (zbc2r04)
|
|
- sg_read_buffer: decode read microcode status page
|
|
- add --inhex=FN option
|
|
- sg_request: add --error option, replaces opcode with 0xff (or skips call
|
|
to pass-through)
|
|
- sg_get_lba_status: add --inhex=FN option
|
|
- sg_xcopy: add --fco (fast copy only) (spc5r20)
|
|
- implement --app=1 (append) on regular OFILE type
|
|
- sg_scan (win32): expand limits for big arrays
|
|
- sg_modes: placeholders for Command duration limit T2A and T2B mpages
|
|
(sbc4r17)
|
|
- improve zbc support (e.g. caching mpage)
|
|
- sg_logs: add Command duration limits statistics lpage (spc6r01)
|
|
- zoned block device statistics log page: shorten counter fields from
|
|
8 to 4 bytes (zbc2r02)
|
|
- new field in this log page (zbc2r04)
|
|
- change '-ll' option to suppress subpages=0xff apart from page
|
|
0x0,0xff. Used three times: list all pages and subpages names
|
|
reported
|
|
- sg_reassign: for defect list format 6 (vendor specific) don't try to decode
|
|
- sg_rep_zones: expand some fields per zbc2r04
|
|
- add --num= and --wp options
|
|
- sg_verify: correct so issues VERIFY(16)
|
|
- add --0 and --ff options and implement bytchk=3 properly
|
|
- sg_write_same: add --ff for 0xff fill
|
|
- sg_luns: report new "target commands" w-lun (19-117)
|
|
- sg_dd: add --verify support
|
|
- sgp_dd: support memory-mapped IO via mmap flag
|
|
- inhex directory: new, contains ASCII hex files that can be used with
|
|
the '--inhex=' option
|
|
- sg_lib: add sg_t10_uuid_desig2str()
|
|
- add sg_get_command_str and sg_print_command_len()
|
|
- speed up sg_print_command()
|
|
- sg_scsi_normalize_sense(): populate byte4,5,6
|
|
- tweak sg_pt interface to better handle bidi
|
|
- sg_cmds_process_resp(): two arguments removed
|
|
- add ${PACKAGE_VERSION} to '.so' name
|
|
- add sg_f2hex_arr()
|
|
- update some tables for NVMe 1.4
|
|
- sg_get_num()+sg_get_llnum(): add 'e' decoding, exabytes; allow
|
|
addition (e.g. --count=3+1k)
|
|
- asc/ascq match asc-num.txt @t10 20191014
|
|
- new zbc2r04 service actions
|
|
- sg_pt_freebsd: fixes for FreeBSD 12.0 release
|
|
- scripts: update 54-before-scsi-sg3_id.rules, scsi-enable-target-scan.sh
|
|
and 59-fc-wwpn-id.rules
|
|
- linux: add nanosecond durations when SG3_UTILS_LINUX_NANO environment
|
|
variable givenand Linux sg driver >= 4.0.30
|
|
- rescan-scsi-bus: widen LUN 0 only scanning
|
|
- multiple patches to sync with Suse
|
|
- testing/sg_tst_async: fix free_list issue
|
|
- testing/sg_tst_ioctl: for sg 4.0 driver
|
|
- testing/sg_tst_bidi: for sg 4.0 driver
|
|
- testing/sgh_dd: test request sharing, mreqs...
|
|
- add --verify support
|
|
- testing/sgs_dd: back from archive, for testing SIGPOLL (SIGIO) and
|
|
realtime (RT) signals
|
|
- testing/sg_chk_asc: allow LF and CR/LF in asc-num.txt
|
|
- testing: 'make' now builds both C and C++ programs
|
|
- sg_pt: add sg_get_opcode_translation() to replace global pointer to
|
|
array: sg_opcode_info_arr[]
|
|
- extend small SNTL to support read capacity
|
|
- utils/hxascdmp: add -o=<offset> option
|
|
- add -1, -2 and -q options
|
|
- sg_io_linux (sg_lib): add sg_linux_sense_print()
|
|
- sg_pt_linux: uses sg v4 interface if sg driver >= 4.0.0 . Force sg v3
|
|
always by building with './configure --disable-linux-sgv4'
|
|
- add sg_linux_get_sg_version() function
|
|
- add: 'SPDX-License-Identifier: BSD-2-Clause' or a small number of
|
|
'GPL-2.0-or-later'
|
|
- gcc-9: suppress (pointless) warnings
|
|
- automake: upgrade to version 1.16.1
|
|
- autoconf: upgrade to version 2.69
|
|
- sync with fixes from Redhat, via github
|
|
|
|
Changelog for sg3_utils-1.44 [20180912] [svn: r791]
|
|
- same code as release 1.43 20180911 svn rev 789;
|
|
new release due to sync problem with git mirror at:
|
|
https://github.com/hreinecke/sg3_utils
|
|
that has a v1.43 tag dated 20160217 [svn: r663]
|
|
|
|
Changelog for sg3_utils-1.43 [20180911] [svn: r789]
|
|
- release 1.43 20180911 svn rev 789
|
|
- sg_write_x: where x can be normal, atomic, or(write),
|
|
same, scattered, or stream writes with 16 or 32 byte
|
|
cdbs (sbc4r04 for atomic, sbc4r11 for scattered)
|
|
- sg_bg_ctl: new Background control command (sbc4r08)
|
|
- sg_seek: new SEEK(10) or PRE-FETCH(10 or 16)
|
|
- sg_stream_ctl: new, STREAM CONTROL or GET STREAM STATUS
|
|
- sg_senddiag: add --timeout=SECS option
|
|
- sg_sanitize: add --timeout=SECS option
|
|
- add --dry-run option
|
|
- sg_format: add --timeout=SECS option
|
|
- add --dry-run option to bypass modifying behaviour
|
|
- add --quick option to skip reconsideration time
|
|
- extend --wait timeout to 40 hours for disk sizes
|
|
> 4 TB and 80 hours if > 8 TB
|
|
- when changing block size allow for Mode Select
|
|
rejecting SP=1 (Save Page): repeat with SP=0
|
|
- FFMT tweaks: default CMPLST to false, shorten poll
|
|
- make all data-in and data-out buffers page aligned
|
|
- sg_decode sense: add --cdb and --err=ES options
|
|
- sg_ses: handle 2 bit EIIOE field in aes dpage
|
|
- increase join array size from 260 to 520 elements
|
|
- add --quiet option to suppress messages
|
|
- expand join handling of SAS connectors and others
|
|
- expand join debug code
|
|
- allow multiple --clear=, --get= and --set= options
|
|
- allow individual index ranges (e.g. --index=3-5)
|
|
- allow --index=IIA with -ee to enumerate only fields
|
|
belonging to element type IIA
|
|
- --data=@FN with --status now decodes dpage(s) in FN
|
|
- add 'offset_temp' and 'rqst_override' to temperature
|
|
sensor element type
|
|
- add 'hw_reset' and 'sw_reset' to enclosure services
|
|
controller electronics element type (18-047r1)
|
|
- interpret '--join --page=aes' to only display join
|
|
rows that have a corresponding AES dpage element
|
|
- support NVMe attached enclosure via NVME-MI Send and
|
|
Receive SES commands
|
|
- decode array status diagnostic page (obsolete)
|
|
- sync to ses4r01
|
|
- sg_ses_microcode: add --dry-run and -ealsd options
|
|
- sg_ses, sg_ses_microcode, sg_senddiag: make all access
|
|
buffer page size aligned (typically page_size=4096)
|
|
- sg_write_buffer: add --dry-run option
|
|
- sg_luns: resync with drafts (sam6r02+spc5r10)
|
|
- remove undocumented test "W" format
|
|
- accept and output on request "quad dashed" format
|
|
- sg_logs: fix volume statistics lpage when subpage
|
|
is zero (ssc5r02a); decode mount history log parameter
|
|
- add --vendor=VP and '--pdt=DT' options
|
|
- decode Requested recovery, TapeAlert response, and
|
|
Service buffer information lpages for tape
|
|
- add min+max 'mounted' temperature and rel. humidity
|
|
fields to Environmental reporting lpage (spc5r10)
|
|
- add last n Inquiry/Mode_page data changed log
|
|
pages (spc5r17)
|
|
- add zoned block device statistics lpage (zbc2r?,
|
|
16-264r4)
|
|
- fixup enumeration in power condition transition
|
|
log page (from H. Reinecke, Suse)
|
|
- sg_inq: fix potential unbounded loop in --export
|
|
- add --only to stop standard inquiry decoding also
|
|
doing a serial number vpd page (0x80) fetch
|
|
- update version descriptor list to 20170114
|
|
- add further checks so CDROM standard inquiry response
|
|
doesn't trick --inhex into thinking it's VPD pg 0x80
|
|
- decode NVMe Identify controller/nsid commands
|
|
- with NVMe --only restricts to a single Identify
|
|
controller command
|
|
- add --long which decodes more of the NVMe Identify
|
|
command responses
|
|
- sg_inq+sg_vpd: update Extended inquiry data vpd
|
|
page (spc5r09 and 17-142r5)
|
|
- block limits and block limit extension VPD pages:
|
|
add extra info about corner cases
|
|
- add maximum inquiry|mode_page change logs fields
|
|
to extended inquiry vpd page (spc5r17)
|
|
- both now return EDOM (adjusted sg error code) when
|
|
requested page not in Supported VPD Pages page
|
|
- add --force option to bypass checking Supported
|
|
Vpd Pages page and fetch requested page directly
|
|
- sg_vpd: 3 party copy VPD page improvements
|
|
- fully implement Device constituents VPD page
|
|
- decode some WDC/Hitachi vendor VPD pages
|
|
- improve handling of unknown pages
|
|
- sg_reassign+sg_write_same: fix ULONG_MAX problem
|
|
- sg_rdac: add sanity checks for -f=lun value
|
|
- sg_turs+sg_requests: make both accept '--num=NUM'
|
|
and '--number=NUM' for mutual compatibility
|
|
- sg_turs: add --low option
|
|
- fix exit status when not ready in single case
|
|
- sg_zone: fix debug cdb naming
|
|
- add --sequentialize, --count=ZC options, zbc2r01b
|
|
- sg_reset_wp add --count=ZC option, zbc2r01b
|
|
- sg_persist: add --maxlen-LEN option, LEN defaults to
|
|
decimal, similar to --alloc-length= which takes hex
|
|
- add Replace lost reservation capable (RLR_C) bit
|
|
in Report Capabilities (spc4r36)
|
|
- sg_dd: add --dry-run and --verbose options
|
|
- allow multiple short options (e.g. -dvv )
|
|
- sgp_dd: pthread_cancel() has issues in C++ (and
|
|
the Android multi-threaded library doesn't supply it)
|
|
so use pthread_kill() in its place [Linux only]
|
|
- add --dry-run and --verbose options
|
|
- sgm_dd: add --dry-run and --verbose options
|
|
- sg_opcode: add '--enumerate' and '--pdt=' options
|
|
- support CDLP (command duration limit page)
|
|
- support MLU, Multiple Logical Units (18-045r1)
|
|
- check resid and trim response if necessary
|
|
- report when --no-inquiry is ignored
|
|
- sg_raw: add --enumerate option
|
|
- add --cmdfile=CF option, permit 64 byte NVMe
|
|
admin commands to be sent
|
|
- add --raw option (for CF in binary)
|
|
- page align input and output buffers
|
|
- sg_get_lba_status: add --report-type= option (sbc4r12)
|
|
- add support for 32 byte cdb variant (sbc4r14)
|
|
- add support for --element-id= and --scan-len=
|
|
options (sbc4r14)
|
|
- decode response's RTP and two more provisioning
|
|
statuses and the additional status (sbc4r12)
|
|
- decode completion condition (sbc4r14)
|
|
- sg_modes: add Out of band management control mpage
|
|
- accept acronym for page/subpage codes
|
|
- sg_rep_zones: expand --help option information
|
|
- sg_unmap: add --all=ST,RN[,LA] option to unmap
|
|
large contiguous segments of a disk/ssd
|
|
- add --dry-run and --force options
|
|
- sg_wr_mode: add --rtd option for RTD bit
|
|
- sg_timestamp: add '--no-timestamp' option
|
|
- add --elapsed and --hex options
|
|
- sginfo: don't open /dev/snapshot
|
|
- introduce SG3_UTILS_DSENSE environment variable
|
|
- manpages and usage messages: corrections from
|
|
Gris Ge via github
|
|
- group_number: is 6 bit field allowing 0 to 63,
|
|
code in several utilities limited it to 31, fix
|
|
- convert many two valued 'int's to bool
|
|
- sg_lib: add SSC maintenance in/out sa names
|
|
- enhance exit status values and associated
|
|
strings, add SG_LIB_OS_BASE_ERR (50)
|
|
- add sg_ll_inquiry_v2(), sg_ll_inquiry_pt() and
|
|
sg_simple_inquiry_pt()
|
|
- add sg_ll_report_luns_pt()
|
|
- add sg_ll_log_sense_v2()
|
|
- add sg_ll_mode_sense10_v2()
|
|
- add sg_ll_mode_select6_v2() and
|
|
sg_ll_mode_select10_v2() for RTD bit
|
|
- add sg_ll_receive_diag_v2()
|
|
- add sg_ll_write_buffer_v2()
|
|
- add sg_get_llnum_nomult()
|
|
- add sg_ll_get_lba_status16()
|
|
- add sg_ll_get_lba_status32()
|
|
- add sg_ll_format_unit_v2()
|
|
- add sg_ll_test_unit_ready_progress_pt()
|
|
- add sg_ll_start_stop_unit_pt()
|
|
- add sg_ll_request_sense_pt()
|
|
- add sg_ll_send_diag_pt(), sg_ll_receive_diag_pt()
|
|
- add sg_get_sfs_name() for spc5r11 (Feature sets)
|
|
- add sg_decode_transportid_str()
|
|
- add sg_msense_calc_length()
|
|
- add sg_all_zeros(), sg_all_ffs()
|
|
- add sg_get_sense_cmd_spec_fld()
|
|
- add sg_is_scsi_cdb()
|
|
- add sg_get_nvme_cmd_status_str()
|
|
- add sg_nvme_status2scsi()
|
|
- add sg_nvme_desc2sense()
|
|
- add sg_build_sense_buffer()
|
|
- add sg_get_nvme_opcode_name()
|
|
- add sg_memalign() and sg_get_page_size()
|
|
- add sg_is_aligned() and pr2ws()
|
|
- add sg_get_big_endian(), sg_set_big_endian()
|
|
- add hex2stdout(), hex2stderr() and hex2str()
|
|
- add sg_convert_errno()
|
|
- add sg_if_can2stdout(), sg_if_can2stderr() and
|
|
sg_exit2str()
|
|
- implement 'format' argument in dStrHexStr()
|
|
- add read buffer(16) command mode names
|
|
- add Microcode activation sense descriptor spc5r10
|
|
- add SG_LIB_OK_TRUE(0) and SG_LIB_OK_FALSE(36)
|
|
non "error" code defines for exit status
|
|
- add SG_LIB_LBA_OUT_OF_RANGE error code
|
|
- add SG_LIB_UNBOUNDED_32BIT (_16BIT and _64BIT)
|
|
defines to help with decoding corner cases
|
|
- identify vendor specific sense data (response
|
|
code 0x7f), print contents in hex
|
|
- sg_pr2serr.h: add sg_scnpr() [like lk scnprintf()]
|
|
- sg_pt: add construct_scsi_pt_obj_with_fd()
|
|
- add pt_device_is_nvme(), get_pt_nvme_nsid()
|
|
- add check_pt_file_handle()
|
|
- add get_pt_file_handle(), set_pt_file_handle()
|
|
- add small SNTL to support sg_ses on NVMe
|
|
- sg_lib_data: sync asc/ascq codes with T10 20170114
|
|
- add write scattered (16+32) cdb names sbc4r11
|
|
- sg_cmds_extra: expand sg_ll_ata_pt() to send new
|
|
Ata pass-through(32) command (sat4r05)
|
|
- sg_sat_identify: expand to take --len=32
|
|
- sg_pt: add dummy pt_device_is_nvme()
|
|
- rescan-scsi-bus.sh: harden code
|
|
- fixes from Suse; bump version
|
|
- bump version to 20180615
|
|
- add to install list in Makefile, hope it does
|
|
not clash with other package providing it
|
|
- add --ignore-rev to ignore revision change
|
|
- 55-scsi-sg3_id.rules: fixes from Suse
|
|
- https://github.com/hreinecke/sg3_utils branch
|
|
sles15 synced 20170914
|
|
- move some testing utilities out of the
|
|
'examples' and 'utils' directories into the new
|
|
'testing' directory
|
|
- add testing/sg_tst_nvme utility
|
|
- clean Makefile.freebsd in examples/ and testing/
|
|
- gcc 7.2 cleanups (sysmacros.h etc)
|
|
- clang --analyze static checker clean ups
|
|
- shellcheck cleanup on scripts
|
|
- ./configure automake utility:
|
|
- option --enable-debug added for testing
|
|
- option --disable-linuxbsg retired, still accepted
|
|
but now ignored, Linux sg v3 or v4 interface
|
|
decision made at runtime
|
|
- Info section now printed at end of ./configure
|
|
- automake: add AM_PROG_AR to configure.ac
|
|
- upgrade to version 1.15
|
|
- various configure.ac and Makefile.am cleanups
|
|
- add SG_LIB_ANDROID build 'define'. If defined then
|
|
SG_LIB_LINUX is also defined, so test for Android
|
|
before Linux if need to differentiate
|
|
- update BSD license from 3 to 2 clause aka FreeBSD
|
|
license (without reference to FreeBSD project)
|
|
- debian: bump compat file contents from 7 to 10
|
|
|
|
Changelog for sg3_utils-1.42 [20160217] [svn: r663]
|
|
- sg_timestamp: new, to report or set timestamp
|
|
- sg_read_attr: new, supported by tape drives
|
|
- sg_stpg: fix truncation of target port field
|
|
- sg_inq: cope with unicode strings, udev fixes
|
|
- update version descriptor list to 20160125
|
|
- '--export': new entries for UUID descriptor
|
|
- sg_ses: add more field acronyms (ses3r11)
|
|
- sg_logs: add Utilization lpage (sbc4r07)
|
|
- add Background operation lpage
|
|
- add Pending defects lpage
|
|
- add LPS misalignment lpage (sbc4r10)
|
|
- document '--All' ('-A') option
|
|
- rework lto tape vendor lpages
|
|
- sg_vpd: add Block limits extension VPD page
|
|
- add Device constituents VPD page
|
|
- add LB Protection VPD page (ssc ssc5r02a)
|
|
- LB provisioning VPD page: expand LBPRZ, add
|
|
Minimum and Threshold percentage fields
|
|
- rework lto tape vendor VPD pages
|
|
- sg_inq+sg_vpd+sg_xcopy: add support for locally
|
|
assigned UUIDs in VPD page 0x83 (spc5r08)
|
|
- sg_sanitize: add --znr option (sbc4r07)
|
|
- sg_rep_zones: add --partial option (zbc-r04)
|
|
- sg_format: add ffmt option (sbc4r10)
|
|
- add support for FORMAT MEDIUM (for tape)
|
|
- sg_raw: document length relationships
|
|
- rescan-scsi-bus.sh: updates from Suse
|
|
- sg_lib_data: sync asc/ascq codes with T10 20151126
|
|
- sg_lib: add 'sense' categories for SCSI statuses:
|
|
condition met, busy, task set full, ACA active and
|
|
task aborted
|
|
- add pr2serr() extern
|
|
- change sg_get_sense_str() and dStrHexStr(), return
|
|
chars written (returned void previously)
|
|
- add sg_get_sense_descriptors_str() function
|
|
- add sg_get_designation_descriptor_str() function
|
|
- sg_get_desig_type_str()+sg_get_desig_assoc_str()
|
|
and sg_get_desig_code_set_str() added
|
|
- sg_get_opcode_sa_name() break out zoning in/out,
|
|
read attribute and read position service actions
|
|
- sg_cmds_extra: add sg_ll_format_unit2() for FFMT
|
|
- sg_pr2serr.h: new, to shorten fprintf(stderr, ...)
|
|
- sg_io_linux, sg_pt_linux: drop SUGGEST_* decoding
|
|
- sg_unaligned.h: add 48 bit support and gets for
|
|
variable length unsigned integers
|
|
- add specializations for little and big endian
|
|
- change sg_ll_*() function's 'int noisy' to bool
|
|
|
|
Changelog for sg3_utils-1.41 [20150511] [svn: r644]
|
|
- sg_zone: new utility for open, close and finish
|
|
zone commands introduced in zbc-r02
|
|
- sg_rep_zones and sg_reset_wp: change opcodes as
|
|
indicated in zbc-r02
|
|
- sg_read_buffer: add READ BUFFER(16) support (spc5r02)
|
|
- sg_logs: add --enumerate and acronyms
|
|
- allow decode from hex or binary in file
|
|
- decode environmental reporting + limits lpages
|
|
- sg_write_buffer: add --timeout=TO option
|
|
- sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
|
|
plus support for zoning service actions
|
|
- sg_lib: in Linux blocked devices yield ENXIO from
|
|
ioctl(SG_IO), map to SG_LIB_CAT_NOT_READY
|
|
- clean up sg_warnings_stream handling
|
|
- sg_inq+sg_vpd: fix SCSI name string decoding in
|
|
device identification VPD page (0x83)
|
|
- increase sanity on Unit Serial number VPD page
|
|
- improve rdac vpd page reporting (vendor)
|
|
- sg_inq: improve NAA handling in dev_id VPD page
|
|
- update version descriptor list to 20150126
|
|
- sg_vpd: add atomic boundary values (sbc4r04)
|
|
- block limits VPD page: fix unmap granularity
|
|
alignment value; spc5r02 additions
|
|
- sg_readcap: add support for ZBC's rc_basis field
|
|
- sg_senddiag: fix bug with --raw option
|
|
- add support for -HHH for output suitable for --raw
|
|
- sg_ses: enclosure element: add failure and warning
|
|
acronyms, fix warning indication output
|
|
- additional element status dpage: add PCIe/NVMe
|
|
- handle element descriptor names that count
|
|
multiple trailing NULLs
|
|
- rescan-scsi-bus.sh: add --issue-lip-wait option and
|
|
improve error handling
|
|
- improve dm-multipath handling
|
|
- sg_modes: make '-HHH' output suitable as input to
|
|
'sdparm --inhex='
|
|
- sg_rdac: add '-6' option for mode sense/select(6)
|
|
- add support for reporting more SCSI transports
|
|
and accessing rdac extended mode page 0x2c
|
|
- sg_write_same: cleanup, mainly man page
|
|
- scsi_logging_level: replace use of tr command
|
|
- examples/sg_tst_async: cleanup
|
|
- examples/sg-simple_aio.c: remove
|
|
- sg_lib_data: sync asc/ascq codes with T10 20150423
|
|
- Makefile cleanup
|
|
- autogen.sh: upgrade to buildconf 20091223 version
|
|
|
|
Changelog for sg3_utils-1.40 [20141110] [svn: r620]
|
|
- sg_write_verify: new utility for WRITE AND VERIFY
|
|
- sg_ses_microcode: new utility
|
|
- sg_sat_read_gplog: new utility
|
|
- sg_senddiag: add --maxlen= option
|
|
- sg_copy_results: correct response length calculations
|
|
- sg_format: make '-FFF' bypass mode sense/select
|
|
- add --mode=MP to supply alternate mode page,
|
|
default remains read-write error recovery mpage
|
|
- output unit serial number and LU name prior to
|
|
- sg_inq: expand Block limits VPD page output
|
|
- fix --cmddt output if not supported by device
|
|
- more sanity checks on vendor supplied fields
|
|
- sg_vpd: add --all option
|
|
- more TPC VPD page decoding
|
|
- add zoned block device characteristics page
|
|
- more sanity checks on vendor supplied fields
|
|
- sg_ses: fix problem with --index=sse (and ssc)
|
|
- mask status element before using as control
|
|
- defeat previous item with --mask (ignore) option
|
|
- SAS connector status element: add overcurrent bit
|
|
- handle element descriptor names that count a
|
|
trailing NULL
|
|
- add --warn option mainly for broken joins
|
|
- add optional descriptions to -ee output
|
|
- sync with ses3r07
|
|
- sg_sanitize: add --desc and --zero options
|
|
- output unit serial number and LU name prior to
|
|
- sg_rep_zones: corrections, sync with zbc-r01c
|
|
- sg_persist: split help into two pages, '-hh' for 2nd
|
|
- sg_logs: refine tape drive output
|
|
- sg_raw: with -vvv decode T10 CDB name
|
|
- do not output/print data-in if error
|
|
- sg_opcodes: add --compact field
|
|
- sg_senddiag: add --page=PG option
|
|
- sg_reset: add words for EAGAIN from reset ioctl
|
|
- sg_sat_*: mention t_type and multiple_count fields
|
|
- win32: sg_scan: handle larger configurations
|
|
- sg_lib: trim trailing spaces in dStrHex() and friends
|
|
- sg_lib_data: sync asc/ascq codes with T10 20140924
|
|
- clean up service action string functions
|
|
- sg_ll_unmap_v2(): fix group number
|
|
- sg_ll_inquiry(), sg_ll_mode_sense*(),
|
|
sg_ll_log_sense(): use resid to clear unfilled
|
|
data-in buffer
|
|
- sg_unaligned.h: add header for building parameters
|
|
- examples/sg_tst_async: new Linux sg test utility
|
|
|
|
Changelog for sg3_utils-1.39 [20140612] [svn: r588]
|
|
- sg_rep_zones: new utility for ZBC REPORT ZONES
|
|
- sg_reset_wp: new utility, ZBC RESET WRITE POINTER
|
|
- sg_ses: add --eiioe=auto|force option
|
|
- fix AES dpage element indexing problems
|
|
- add --readonly option
|
|
- sg_write_buffer: add --bpw=CS option to call
|
|
write buffer multiple times for big blobs
|
|
- sg_format: add --ip_def option to fully provision
|
|
- sg_opcodes: add --mask option
|
|
- sg_logs: add --in=FN option for log select params
|
|
- add --filter=PARC (parameter code)
|
|
- add --no_inq for suppress initial INQUIRY call
|
|
- add --readonly option
|
|
- sg_persist: add --readonly option, environment
|
|
variable SG_PERSIST_IN_RDONLY sets ro on prin cmds
|
|
- sg_inq: sync version descriptors dated 20105176
|
|
- suppress dev-id VPD messages so they only appear
|
|
when --verbose is given
|
|
- add new SCSI_IDENT_*_ATA pair to --export output
|
|
- sg_luns: add decoding for conglomerate LUNS
|
|
- add --lu_cong option to simulate the LU_CONG bit
|
|
- sg_vpd: add --vendor=VP option, re-order vendor
|
|
specific pages, split lto into lto5 and lto6
|
|
- add Supported block lengths and protection types
|
|
page (sbc4r01)
|
|
- add Block device characteristics extension
|
|
page (sbc4r02)
|
|
- sg_copy_results, sg_get_lba_status, sg_luns,
|
|
sg_read_buffer, sg_readcap, sg_referrals, sg_rtpg,
|
|
sg_sat_set_features, sg_sat_identify:
|
|
add --readonly option
|
|
- sginfo: strip trailing spaces from INQUIRY text
|
|
- sg_rbuf: add --echo option (to use echo buffer)
|
|
- sg_lib: add sanitize command service action names
|
|
- add 'sense' categories for reservation conflict,
|
|
data protect and protection information violations
|
|
- add sg_get_category_sense_str() to API
|
|
- change struct sg_simple_inquiry_resp::rmb to byte_1
|
|
- add initial zbc service actions
|
|
- dStrHex(Err): fix output truncation error
|
|
- linux, sg: support SCSI_PT_FLAGS_QUEUE_AT_TAIL and
|
|
SCSI_PT_FLAGS_QUEUE_AT_HEAD (block layer queueing)
|
|
- sg_lib_data: sync asc/ascq codes with T10 20140516
|
|
- sync operation code with T10 20140515
|
|
- add id string for SPC-5
|
|
- scripts/59-scsi-sg3_utils.rules: removed
|
|
- functionality split into two scripts:
|
|
55-scsi-sg3_id.rules + 58-scsi-sg3_symlink.rules
|
|
- examples/sg_persist_tst.sh: add --exclusive option
|
|
- win32: sg_scan, sg_ses and sg_log fixes
|
|
- examples/sgq_dd: re-add old utility as example
|
|
|
|
Changelog for sg3_utils-1.38 [20140401] [svn: r563]
|
|
- sg_ses: add --dev-slot-num= and --sas-addr=
|
|
- fix --data=- problem with large buffers
|
|
- new --data=@FN to read hex data from file FN
|
|
- error and warning message cleanup
|
|
- add --maxlen= option
|
|
- sg_inq: add --block=0|1 option to control opens
|
|
- add --inhex=FN to read response in ASCII hex from
|
|
a file; --inhex=FN --raw reads response in binary
|
|
- make -HHH (-HHHH for '-p ai') output suitable for
|
|
another sg_inq invocation to use --inhex to decode
|
|
- add LU_CONG to standard inquiry response output
|
|
- decode ASCII information VPD pages
|
|
- add HAW_ZBC in block dev char. VPD page (sbc4r01)
|
|
- sync version descriptors dated 20131126
|
|
- allow --page=-1 to force std INQUIRY decoding
|
|
- fix overflow in encode_whitespaces
|
|
- improve unit serial number display (VPD page 0x80)
|
|
- sg_vpd: add LU_CONG to standard inquiry response output
|
|
- add --inhex=FN to read response in ASCII hex from
|
|
a file; --inhex=FN --raw reads response in binary
|
|
- decode Third Party Copy (tpc) page
|
|
- add HAW_ZBC in block dev char. VPD page (sbc4r01)
|
|
- add LTO and DDS vendor pages
|
|
- allow --page=num to restrict --enumerate output
|
|
- sg_persist: add PROUT: Replace Lost Reservation (spc4r36)
|
|
- add --transport-id= for SOP: 'sop,<routing_id_in_hex>'
|
|
- sg_readcap: for --16 show physical block size if
|
|
different from logical block size
|
|
- sg_xcopy: environment variables: XCOPY_TO_SRC and
|
|
XCOPY_TO_DST indicate where xcopy command is sent
|
|
- change default to send xcopy to dst (was src)
|
|
- improve CL handling of short options (e.g. '-vv')
|
|
- sg_luns: guard against garbage response
|
|
- sg_decode_sense: with --nospace ignore spaces on
|
|
command line, so multiple arguments are concatenated
|
|
- sg_write_same: repeat if unit attention
|
|
- sg_rtpg: fix indexing bug with --extended option
|
|
- sg_logs: placeholder for pending defects lpage
|
|
- sg_unmap: fix another problem with --grpnum= option
|
|
- sg_lib.h: add PDT_ZBC define (spc4r36p)
|
|
- sg_lib_data: sync asc/ascq codes with T10 dated 20140320
|
|
- add pdt string for ZBC (spc4r36p)
|
|
- sg_lib: extensions to sg_get_num() and sg_get_llnum()
|
|
- sg_cmds_extra: fix sa bug in sg_ll_3party_copy_out()
|
|
- scripts/rescan-scsi-bus.sh: check if FC driver exports
|
|
issue_lip before using it
|
|
- man page added (Linux only)
|
|
- scripts/59-scsi-sg3_utils.rules: linux specific udev rules
|
|
- examples: add sg_tst_excl3 for testing O_EXCL
|
|
- improve sg_tst_excl and sg_tst_excl2
|
|
- add sg_tst_context for testing file handle contexts
|
|
- upgrade automake to version 1.13.3
|
|
- add suse directory and 'spec' file to facilitate builds
|
|
|
|
Changelog for sg3_utils-1.37 [20131014] [svn: r522]
|
|
- sg_compare_and_write: fix wrprotect setting
|
|
- add --quiet option to suppress miscompare report
|
|
- merge features from another implementation
|
|
- sg_inq: fix referrals VPD page
|
|
- dev_id VPD: T10 vendor id designator clean up
|
|
- sg_logs: improve for tape drives, general cleanup
|
|
- sg_persist: fix core dump on -Q option
|
|
- sg_unmap: fix core dump on -g option
|
|
- sg_vpd: dev_id VPD: T10 vendor id designator clean up
|
|
- cleanup up dev_id NAA-3: locally assigned
|
|
- sg_ses: add --nickname and --nickid options
|
|
- eiioe added to additional element status page (ses3r6)
|
|
- multiple --filter options to prune output
|
|
- sg_verify: improve miscompare handling
|
|
- rename --btychk=ndo option to --ndo=ndo (hide former)
|
|
- add --quiet option
|
|
- sg_xcopy: allow sg and bsg devices
|
|
- fix for bpt going negative
|
|
- limit each XCOPY(LID1) command to 65535 blocks
|
|
- fix for seek in multi-segment copies
|
|
- sg_sanitize: skip 15 second safety delay with --fail
|
|
- sg_libs: extended copy opcode renamed (spc4r34)
|
|
- sg_ll_receive_copy_results(): expand for all sa_s
|
|
- add sg_get_sense_key()
|
|
- add sg_ll_3party_copy_out()
|
|
- add dStrHexErr(): ascii hex to stderr
|
|
- add dStrHexStr(): ascii hex to string
|
|
- add SG_LIB_CAT_MISCOMPARE to categories
|
|
- clean header files
|
|
- sg_pt_freebsd: sanity check on sense_resid; fix leaks
|
|
- scripts/rescan-scsi-bus.sh KG's v1.57 + HR patch
|
|
- improve wlun handling, detect updated and resized
|
|
devices, better multipath support
|
|
- Makefile.am cleanup
|
|
- examples: add sg_tst_excl and sg_tst_excl2
|
|
|
|
Changelog for sg3_utils-1.36 [20130531] [svn: r497]
|
|
- sg_vpd: Protocol-specific port information VPD page
|
|
for SAS SSP, persistent connection (spl3r2), power
|
|
disable (spl3r3)
|
|
- block device characteristics: add FUAB bit
|
|
- sg_xcopy: handle more descriptor types; handle zero
|
|
maximum segment length; allow list IDs to be disabled;
|
|
improve skip/seek handling; allow xcopy on destination
|
|
- sg_reset: and --no-esc option to stop reset escalation
|
|
- clean up cli, add long option names
|
|
- sg_luns: add --test=ALUN option for decoding LUNs
|
|
- decoded luns output in decimal or hex (if -HH given)
|
|
- add '--linux' option to show Linux LUN after T10
|
|
representation, can map one to the other
|
|
- sg_inq: add --vendor option to show standard inquiry's
|
|
vendor specific fields in ASCII
|
|
- take resid into account with response output
|
|
- sg_sync: add --16 (for 16 byte command) and --timeout=
|
|
- sg_logs: add data compression page (ssc4)
|
|
- sg_sat_set_features: increase --lba from 1 to 4 bytes
|
|
- sg_write_same: add --ndob option (sbc3r35d)
|
|
- sg_map: mark as deprecated
|
|
- sginfo: mark as deprecated, especially -l (list)
|
|
- sg_lib: improve snprintf handling
|
|
- sg_lib_data: sync asc/ascq codes with T10 20130117
|
|
- sg_cmds (lib): if noisy given, give more UA info
|
|
- make code more C++ friendly
|
|
|
|
Changelog for sg3_utils-1.35 [20130117] [svn: r476]
|
|
- sg_compare_and_write: new utility
|
|
- sg_inq+sg_vpd: block device characteristics VPD page:
|
|
add product_type, WABEREQ, WACEREQ and VBULS fields
|
|
- sg_inq: more --export option changes for udev
|
|
- sg_vpd: add more rdac vendor specific vpd pages
|
|
- sg_verify: add --ebytchk option for sbc3r34 changes
|
|
- sg_stpg: --offline option: fix 'Invalid state 0xe'
|
|
- sg_ses: Door Lock element changed to Door element and
|
|
abbreviation changed from 'dl' to 'do' (ses3r05)
|
|
- archive/rescan-scsi-bus.sh: upgrade to version 1.53hr
|
|
- move rescan-scsi-bus.sh to scripts directory
|
|
- sync to sbc3r34
|
|
- sg_lib: sg_ll_verify10+16 expand BYTCHK to 2 bit field
|
|
- sg_pt_win32, sg_scan(win32): changes for cygwin 1.7.17
|
|
- clean up man page summary lines
|
|
|
|
Changelog for sg3_utils-1.34 [20121013] [svn: r461]
|
|
- sg_xcopy: new dd like utility for extended copy command
|
|
- sg_copy_results: new utility for receive copy results
|
|
- sg_verify: add 16 byte cdb, bytchk (data-out buffer)
|
|
and group number support
|
|
- sync to spc4r36 and sbc3r32
|
|
- sg_inq: add --export so sg_inq can replace udev's scsi_id
|
|
- decode old EMC Symmetrix abuse of VPD page 0x83
|
|
- sg_vpd: decode old EMC Symmetrix abuse of VPD page 0x83
|
|
- sg_ses: increase max dpage response size to 64 KB
|
|
- allow ident,locate on enclosure controller
|
|
- more sanity for additional element status descriptor
|
|
- sg_sanitize: add --ause, --fail and --test=
|
|
- sg_luns: add long extended flat space addressing format
|
|
- sg_logs: add ATA pass-through results lpage (SAT-2)
|
|
- sg_rtpg: add --extended option
|
|
- sg_senddiag: list rebuild assist diag page name
|
|
- sg_pt_linux: expand DID_ (host_byte) codes
|
|
- cope with a transport error plus sense data
|
|
- prefer major() over MAJOR() macro
|
|
- sg_lib: fix sg_get_command_name() service actions
|
|
- report sdat_ovfl bit (if set) in sense data
|
|
- decode extended_copy and receive_copy service actions
|
|
- decode read_buffer and write_buffer modes
|
|
- decode ATA PT fixed format sense (SAT-2)
|
|
- sg_cmds_extra: add sg_ll_report_tgt_prt_grp2()
|
|
- ./configure options:
|
|
- change --enable-no-linux-bsg to --disable-linuxbsg
|
|
- add --disable-scsistrings to reduce utility sizes
|
|
|
|
Changelog for sg3_utils-1.33 [20120118] [svn: r435]
|
|
- sg_ses: major rework of indexes (again), now two level
|
|
- sg_write_buffer: new --specific option for mode specific
|
|
field; new mode 13 (spc4r32)
|
|
- sg_vpd: add hp3par volume info vendor VPD page
|
|
- fix 'scsi ports' [0x88] page problem
|
|
- add 'sinq' pseudo page for standard inquiry response
|
|
- add power consumption page
|
|
- sg_format: add --poll= option for request sense polling
|
|
- improve handling of disks > 2 TB and DIF (protection)
|
|
- sg_logs: LB provision lpage extra (sbc3r28)
|
|
- sg_modes: application tag mpage subcode 0xf0->0x2
|
|
- sg_write_same: no prot fields when wrprotect=0
|
|
- sg_get_lba_status: reflect change in sbc3r25 to Parameter
|
|
Data Length response field (offset reduced from 8 to 4)
|
|
- sg_inq, sg_vpd: sync with spc4r33
|
|
- win32: change DataBufferOffset type per MSDN; caused
|
|
problem with 64 bit machines (with buffered interface)
|
|
- sg_luns: tweak documentation for vendor specific reports
|
|
- add man pages for scsi_loging_level, scsi_mandat,
|
|
scsi_satl and scsi_temperature
|
|
|
|
Changelog for sg3_utils-1.32 [20110730] [svn: r410]
|
|
- sg_sanitize: new utility for command added in sb3r27
|
|
- sg_sat_identify: add '--ident' to output WWN
|
|
- sg_ses: major rework of descriptor output
|
|
- add --index, --descriptor, --join, --clear, --get,
|
|
and --set options
|
|
- sg_raw: exit status corrections
|
|
- sg_decode_sense: add --nospace and --hex options
|
|
- sg_logs: fix bug with large --maxlen
|
|
- zero response length when resid implies it is invalid
|
|
- add scope field to lb provisioning lpage (sb3r27)
|
|
- sg_inq: sync version descriptors with spc4r31
|
|
- sg_lib_data: sync asc/ascq codes with spc4r31
|
|
- sg_vpd: add LBPRZ field in LB provisioning VPD page
|
|
- sg_format: allow format of pdt 7 (some MO drives)
|
|
- sg_cmds_basic: sg_cmds_process_resp() handle status good
|
|
with a sense key other than no_sense (e.g. completed)
|
|
- add README.iscsi
|
|
|
|
Changelog for sg3_utils-1.31 [20110216] [svn: r386]
|
|
- sg_decode_sense: new utility to decode sense data
|
|
- sg_vpd: LB provisioning + Block limits pages (sbc3r26)
|
|
- sync asc/ascq and version descriptors with spc4r28
|
|
- sg_get_config, sg_rmsn, sg_verify: add --readonly option
|
|
- sg_lib: implement forwarded sense data descriptor
|
|
- decode user data segment referral sense data descriptor
|
|
- sg_lib, sg_turs, sg_format: more precision for progress
|
|
indication (two places after decimal point)
|
|
- sg_lib(win32): add runtime selection of SPT direct or
|
|
indirect interface
|
|
- sg_read_buffer+sg_write_buffer: set SPT direct
|
|
- add examples/forwarded_sense.txt + examples/ref_sense.txt
|
|
|
|
Changelog for sg3_utils-1.30 [20101111] [svn: r363]
|
|
- sg_referrals: new utility for REPORT REFERRALS
|
|
- sbc3r25 renames 'thin' provisioning' to 'logical block
|
|
provisioning': changes in sg_format, sg_inq, sg_logs,
|
|
sg_modes, sg_readcap, sg_vpd
|
|
- sg_inq: update version descriptor list to spc4r27
|
|
- extended inquiry vpd page add extended self test
|
|
completion minutes field
|
|
- sg_lib: sync asc/ascq list to spc4r27
|
|
- dStrHex(): trim excess trailing spaces
|
|
- sg_read_long: add --readonly option (open() is rw)
|
|
- sg_raw: add --readonly option (open() is rw)
|
|
- allow bidirectional commands
|
|
- sg_vpd: rdac vendor page [0xc8] parse corrections
|
|
- extended inquiry vpd page add extended self test
|
|
completion minutes field
|
|
- sg_ses: expand --data (in) buffer to 2048 bytes
|
|
- sg_opcodes: add extended parameter data for TMFs (spc4r26)
|
|
- sg_dd: clean count calculation, document nocache flag
|
|
- treat bsg devices as implicit sg_io
|
|
- add more conversions
|
|
- sg_write_same: if READ CAPACITY(16) fails try 10 byte variant
|
|
- anticipate approval of proposal to allow UNMAP and ANCHOR
|
|
bits to be set on WRITE SAME(10) with '--10' option
|
|
- sg3_utils man page: sections added for OS device names
|
|
|
|
Changelog for sg3_utils-1.29 [20100406] [svn: r334]
|
|
- sg_rtpg: new logical block dependent state and bit (spc4r23)
|
|
- sg_start: add '--readonly' option for ATA disks
|
|
- sg_lib: update asc/ascq list to spc4r23
|
|
- sg_inq: update version descriptor list to spc4r23
|
|
- sg_vpd: block device characteristics page: fix form factor
|
|
- update Extended Inquiry VPD page to spc4r23
|
|
- update Block Limits VPD page to sbc3r22
|
|
- update Thin Provisioning VPD page to sbc3r22
|
|
- Automation device serial number and Data transfer device
|
|
element VPD pages (ssc4r01)
|
|
- add Referrals VPD page (sbc3r22)
|
|
- sg_logs: add thin provisioning and solid state media log pages
|
|
- addition of IBM LTO specific log pages
|
|
- sg_modes: new page names from ssc4r01
|
|
- sg_ses: sync with ses3r02 (SAS-2.1 connector types)
|
|
- sg_unmap: add '--anchor' option (sbc3r22)
|
|
- sg_write_same: add '--anchor' option (sbc3r22)
|
|
- sg_pt interface: add set_scsi_pt_flags() to permit passing
|
|
through SCSI_PT_FLAGS_QUEUE_AT_TAIL and AT_HEAD flags
|
|
- add examples/sg_queue_tst+bsg_queue_tst for SG_FLAG_Q_AT_TAIL
|
|
- add AM_MAINTAINER_MODE to configure.ac to lessen build issues
|
|
- add BSD_LICENSE file to this and lib directories, refer to
|
|
it from source and header files. Some source has GPL license
|
|
|
|
Changelog for sg3_utils-1.28 [20091002] [svn: r315]
|
|
- sg_unmap: new utility for thin provisioning
|
|
- add examples/sg_unmap_example.txt
|
|
- sg_get_lba_status: new utility for thin provisioning
|
|
- sg_read_block_limits: new utility for tape drives
|
|
- sg_logs: add cache memory statistics log (sub)page
|
|
- sg_vpd, sg_inq: extend Block limits VPD page (sbc3r19)
|
|
- sg_vpd: add Thin provisioning VPD page (sbc3r20) and
|
|
TapeAlert supported flags VPD page
|
|
- sg_inq: note VPD page support better in sg_vpd
|
|
- sg_persist: add transport specific transportID format
|
|
- allow transportIDs to be read from named file
|
|
- sg_opcodes: allow --opcode= option to take OP and SA
|
|
values (comma separated)
|
|
- tweak print format, remove test code
|
|
- sg_requests: remove test code in progress calculation
|
|
- sg_reset: add target reset option
|
|
- sg_luns: reduce default maxlen to 8192 (for FreeBSD)
|
|
- sg_raw: extend max cdb length from 16 to 256 bytes
|
|
- align heap allocs to page boundaries
|
|
- sg_lib: sg_set_binary_mode() needs config.h included
|
|
- add progress indication sense data descriptor (0xa)
|
|
- change SG3_UTILS_* constants to SG_LIB_*
|
|
- decode service actions within persistent reserve in/out
|
|
- sync with spc4r21
|
|
- sg_cmds_extra: add sg_ll_unmap() and sg_ll_get_lba_status()
|
|
- sg_pt_linux: fix check condition but empty sense buffer; occurred
|
|
when sg v3 node used and /usr/include/linux/bsg.h visible
|
|
- major() macro grief, if present include <linux/kdev_t.h> and
|
|
use MAJOR() instead
|
|
- scripts/sas_disk_blink: moved from this package to sdparm
|
|
- utils/hxascdmp: in Windows set binary mode on read files
|
|
- examples/sg_persist_tst.sh: add PRIN read full status command
|
|
- sg_raw,sg_write_buffer,sg_write_long,sg_write_same: in Windows
|
|
set binary mode on read files
|
|
- sg_pt_win32: default to non-direct variant of SPT interface
|
|
- use './configure --enable-win32-spt-direct' to override
|
|
- non-direct data length set to 16 KB, extended if required
|
|
- debian: incorporate patch from debian sid
|
|
|
|
Changelog for sg3_utils-1.27 [20090411] [svn: r250]
|
|
- sg_write_same: new utility: 10, 16 and 32 byte cdb variants
|
|
- sg_inq: sync version descriptors with spc4r18
|
|
- add power condition VPD page
|
|
- expand block limits VPD page (sbc3r18)
|
|
- sg_vpd: add power condition VPD page
|
|
- expand block limits VPD page (sbc3r18)
|
|
- sg_map26: fix for lk 2.6.26 when CONFIG_SYSFS_DEPRECATED_V2
|
|
is not defined
|
|
- output cdb when verbose option given
|
|
- correct tape minors >= 32
|
|
- sg_dd: flock flag (does LOCK_EX|LOCK_NB)
|
|
- switch open on input for sg device nodes: first open
|
|
read-write and if that fails try opening read-only
|
|
- experiment with of2=OFILE2; add conv=sparse
|
|
- use posix_fadvise() to defeat caching of normal+block files
|
|
when new 'nocache' flag given
|
|
- sg_dd copied to own package called ddpt
|
|
- sg_dd, sgm_dd, sgp_dd: accept 'count=-1' for calculate count,
|
|
accept '-V' for version string
|
|
- sg_get_config: add OSSC feature [mmc6r02]
|
|
- sg_modes: add ATA power condition mode page
|
|
- sg_logs: protocol specific (SAS) lpage sync to sas2r15
|
|
- power condition transitions lpage (added in spc4r18)
|
|
- extra parameters for start-stop cycle counter lpage
|
|
- sg_format: add '--fmtpinfo=' and '--pie=' options (sbc3r18)
|
|
- sg_readcap: more protection + thin provisioning (sbc3r18)
|
|
- add a '--16' option for 16 byte cdb version
|
|
- sg_persist: code clean up
|
|
- allow '--transport-id=' argument to use space as separator
|
|
- add '--alloc-length=' argument
|
|
- sg_scan: (win32) new format, scsi adapter scan optional
|
|
- sginfo: fix crash when 1024 sg device nodes (or more)
|
|
- sg_ses: allow '--data=' argument to use space as separator
|
|
- sg_senddiag: allow '--raw=' argument to use space as separator
|
|
- sg_reassign: allow '--address=' argument to use space as
|
|
separator
|
|
- sg_wr_mode: allow '--contents=' and '--mask=' arguments to
|
|
use space as separator
|
|
- sg3_utils.spec: correction to configure call
|
|
- sg_pt: add scsi_pt_open_device_flags() call
|
|
- add scsi_pt_version() and clear_scsi_pt_obj() calls
|
|
- clear os_err at start of do_scsi_pt()
|
|
- add linux bsg support via runtime detection
|
|
- sg_cmds: add sg_cmds_open_device_flags()
|
|
- sg_cmds_extra: sg_ll_format_unit: remove rto_req argument,
|
|
the expanded fmtpinfo argument subsumes it.
|
|
- clearer split between Linux and Windows only code and doc
|
|
- automake tools: change to what Ubuntu 8.10 provides
|
|
- Ubuntu 8.10 libtool problems -> Debian 4.0
|
|
|
|
Changelog for sg3_utils-1.26 [20080625] [svn: r183]
|
|
- sg_sat_phy_event: new utility; copied from examples
|
|
directory and enhanced, rename original to sg__sat_phy_event
|
|
- sg_ses: sync with ses2r19b, many nomenclature changes
|
|
- sg_get_config: sync with mmc6r01
|
|
- allow Microcode upgrade and DVD read feature descriptors
|
|
to be 4 bytes long
|
|
- add '--raw' option
|
|
- sg_verify: add --vrprotect= option
|
|
- sg_vpd: add nominal form factor to block dev. char. VPD page
|
|
- add --maxlen= option to set allocation length in cdb
|
|
- sg_inq: add --maxlen= option that does same as --len=
|
|
- move version descriptors (spc4r15) to sg_inq_data.c file
|
|
- sg_inq+sg_vpd: logic for "NAA-3 Locally assigned" identifier
|
|
- update extended inquiry VPD page
|
|
- sg_modes: add --maxlen= option to specify allocation length
|
|
- sg_start: add '--noflush' and '--mod=PC_MOD' options (sbc3r14)
|
|
- sg_request: add a '--progress' option (similar to sg_turs)
|
|
- add --maxlen= option to set allocation length in cdb
|
|
- sg_luns: add --maxlen= option to specify allocation length
|
|
- sg_dd: improve MMC handling of 'illegal mode for this track'
|
|
read errors (with ILI and info field)
|
|
- sg_dd, sgm_dd, sgp_dd, sginfo, sg_rbuf, sg_read: replace
|
|
"%lld" and friends with PRI macros
|
|
- sg_opcodes: tmf name change in spc4r15 (async event)
|
|
- sg_turs: add more to man page about '--progress' indication
|
|
- sg_write_long: add examples section to man page
|
|
- '--raw' option: modify utilities that can send binary output
|
|
to call sg_set_binary_mode(). For MingGW port CR problem.
|
|
- sg_lib: update asc/ascq and command name strings to spc4r15
|
|
- split sg_lib into sg_lib_data.[hc] and sg_lib.[hc]
|
|
- split sg_cmds_extra into sg_cmds_extra and sg_cmds_mmc
|
|
- add osd2r03 service actions (all different from osd-r10)
|
|
- add sg_get_trans_proto_str()
|
|
- add sg_get_sense_filemark_eom_ili() function (MMC uses ILI)
|
|
- add sense key specific unit attention condition queue
|
|
overflow decoding (added in spc4r13)
|
|
- add sg_set_text_mode() and sg_set_binary_mode() functions
|
|
for non-Unix OSes
|
|
- sg_cmds_mmc: add sg_ll_set_streaming() function
|
|
- sg_cmds_extra: add vrprotect argument to sg_ll_verify10()
|
|
- add sg_ll_get_performance() and sg_ll_set_cd_speed()
|
|
- change 'long long' to int64_t and 'unsigned long long' to
|
|
uint64_t to stress that 64 bit integer wanted, not larger
|
|
- audit of dangerous 'u64 = uch[24] << 24' code, replace most
|
|
'unsigned long's
|
|
- multiple documentation corrections provided by Dan Horak
|
|
- win32/MinGW: define SG3_UTILS_MINGW when detected
|
|
- remove archive/pre_configure subdirectory
|
|
- move sg_io_linux.c into the lib subdirectory
|
|
- utils/hxascdmp: add hxascdmp(1) man page
|
|
- switch primary build to ubuntu environment, rename
|
|
library to libsgutils2 to avoid clash
|
|
|
|
Changelog for sg3_utils-1.25 [20071016] [svn: r115]
|
|
- sg_stpg: new utility to Set Target Port Groups
|
|
- sg_safte: new utility to query SAF-TE processor (SES like)
|
|
- sg_sat_set_features: new utility (actually copied from examples
|
|
directory); renamed examples version to: sg__sat_set_features
|
|
- sg_read_buffer: restore (had fallen out of build scripts)
|
|
- sg_dd: add oflag=sparse to step over bs*bpt number of zeros;
|
|
- with oflag=sparse, write last bs*bpt segment at end or after
|
|
error so file length of OFILE is appropriate
|
|
- when coe>1 then SCSI READ LONG logic remembers extended block
|
|
length of first encountered error
|
|
- sg_dd, sgm_dd, sgp_dd: allow iflag=null and oflag=null both of
|
|
which do nothing (placeholders)
|
|
- sg_ses: sync with ses2r17 then r18
|
|
- sg_vpd, sg_inq: add block device characteristics VPD page
|
|
- sg_inq: add '--vpd' option (or '-e') for backward compatibility
|
|
- sg_vpd: decode protocol specific lu information page for SAS
|
|
- add more RDAC vendor VPD pages
|
|
- sg_logs: update background scan results log page, sbc3r11
|
|
- add generation code to protocol specific page for SAS SSP
|
|
- add media changer diagnostic data log page
|
|
- sg_raw: fix error message when do_scsi_pt() fails
|
|
- sg_lib: sync asc/ascq codes with spc4r11
|
|
- add sg_get_num_nomult()
|
|
- add TPROTO_* protocol identifier constants to sg_lib.h
|
|
- sg_cmds_extra: add sg_ll_set_tgt_prt_grp()
|
|
- place source in subversion repository
|
|
- split code into src/ lib/ and include/ directories
|
|
- sync debian directory with their 1.24 version (sid unstable)
|
|
- convert build logic to use autotools (i.e. './configure ; make')
|
|
- rename this file from CHANGELOG to ChangeLog
|
|
- note: only code in lib/ and src/ directories built by
|
|
autotools; some other subdirectories still use hand-crafted
|
|
Makefiles
|
|
|
|
Changelog for sg3_utils-1.24 [20070507] [svn: r77]
|
|
- sg_raw: new utility to send arbitrary SCSI commands
|
|
- sg_luns: increase number of luns that can be fetched
|
|
- fix length of raw and hex output
|
|
- add '--quiet' option to output only ASCII hex
|
|
representation of each lun
|
|
- sg_rtpg: update for changes in spc4r09
|
|
- sg_persist: update documentation, spc-4 references
|
|
- fix exit status values
|
|
- sg_inq: update version descriptors per spc4r09
|
|
- fix '--id' and '--extended'
|
|
- extend block limits VPD page (sbc3r09)
|
|
- sg_vpd: extend block limits VPD page (sbc3r09)
|
|
- append relative target port identifier to SAS target
|
|
port address with '-iq' option
|
|
- sg_logs: add decoding for stats+performance log pages
|
|
- fix showing of page names for pdt > 0
|
|
- implement '-HH' for single and all pages, fix '-r'
|
|
- when '--maxlen=' given, only do single fetch
|
|
- add Tape Alert (ssc), Media and Element statistics (smc) pages
|
|
- add '--brief' option
|
|
- sg_ses: sync with ses2r16
|
|
- fix bay number for SAS
|
|
- sg_format: add '--dcrt' and '--security' options
|
|
- sgm_dd: add 'smmap' oflag for shared_mmap_io testing
|
|
- add 'dio' oflag
|
|
- sg_dd, sgp_dd: add 'dio' iflag and oflag
|
|
- sg_modes: change SAS mode page names per sas2r09
|
|
- check validity of block descriptors length
|
|
- sg_pt: change opaque context object from 'void *'
|
|
to 'struct sg_pt_base *'
|
|
- sg_opcodes: anticipate extra tmfs from 07-159r0
|
|
- sg_sat_set_features: add more usage information
|
|
- add man page
|
|
- sg_sat_phy_event: add to examples directory
|
|
- sg_lib: sync asc/ascq codes with spc4r10
|
|
- Solaris port: using uscsi interface
|
|
- various .html files removed from doc directory
|
|
|
|
Changelog for sg3_utils-1.23 [20070131] [svn: 75]
|
|
- sg_read_buffer: new utility
|
|
- sg_write_buffer: new utility
|
|
- sg_opcodes, sg_senddiag, sg_logs, sg_modes, sg_start, sg_inq,
|
|
sg_turs, sg_readcap, sg_rbuf: add getopt_long() based cli;
|
|
old and new cli selectable, new getopt_long cli is default
|
|
- scripts: new subdirectory containing some bash scripts
|
|
- add scripts/README file
|
|
- sg_reassign: add '--hex' option for grown and primary lists
|
|
- sg_rtpg: add '--raw' option
|
|
- sg_lib.h, sg_cmds_basic.h + sg_cmds_extra.h: add C++
|
|
'extern "C" ' wrappers
|
|
- cleanup C code so it will compile as C++
|
|
- sg_lib: sync with spc4r08
|
|
- include <inttypes.h>, use PRId64 instead of %lld form
|
|
- fix sg_get_sense_str() when empty sense buffer
|
|
- win32 port: add Makefile.mingw + related support for MinGW
|
|
- sg_cmds_extra: add sg_ll_read_buffer() and sg_ll_write_buffer()
|
|
- sg_dd, sgp_dd, sgm_dd, sg_read: use lseek64() instead of llseek.c
|
|
- sgm_dd: accept coe=<n> for interworking with sg_dd
|
|
- sg_rdac: fix on non-linux ports
|
|
- sg_ses: fix spurious warning in additional element status page
|
|
- '-rr' option outputs a diagnostic page in binary to stdout
|
|
- sg_opcodes: add command timeout descriptor support (spc4r08)
|
|
- change linux specific pass through to generic pass through
|
|
- sg_logs: add 'name=value' decoding for SAS specific lpage
|
|
- examples+utils subdirectories: remove symlinks
|
|
- synchronize man pages with usage messages
|
|
- sg3_utils.spec: rework
|
|
|
|
Changelog for sg3_utils-1.22 [20061016] [svn: 72]
|
|
- sgp_dd: accept verbose=<n> as well as deb=<n> to ease
|
|
interworking with sg_dd and sgm_dd
|
|
- sg_sat_set_features: added to examples directory
|
|
- sg_lib: sync asc/ascq text with spc4r06
|
|
- move SG_LIB_CAT_NO_SENSE and SG_LIB_CAT_RECOVERED to
|
|
20 and 21 respectively; add SG_LIB_CAT_ABORTED_COMMAND
|
|
at 11 (its sense key value)
|
|
- sg_vpd: tweak '--page=sp --quiet' output
|
|
- change '-HHH' so same as '-rr' (prepares ATA Information
|
|
(ai) response for hdparm)
|
|
- sg_requests: add '-s' option to set exit status from
|
|
parameter data
|
|
- sg_modes: exit quickly from '-e' if device not ready
|
|
- sg_logs: sync sas log pages with sas2r05a
|
|
- expand background scan results log page
|
|
- add '-m=<max_len>' to limit response length
|
|
- drop '-scum' and '-sthr' options and add '-select'
|
|
- sg_write_long: add '--16' option to send 16 byte cdb
|
|
- add '--wr_uncor' and '--pblock' options
|
|
- sg_senddiag: cleanup and add sdiag_sas_p1_stop.txt
|
|
to examples directory
|
|
- sg_format: add '--cmplst=<n>' option (default: 1)
|
|
- add '--pfu=<n>' option
|
|
- expand man page to discuss P/D/C/GLISTs
|
|
- sg_reassign: add '--primary' option to fetch primary
|
|
defect list (PLIST) length
|
|
- sg_readcap: add '-H' option to output response in hex
|
|
and '-r' to output response in binary to stdout
|
|
- add logical blocks per physical block (sbc3r07)
|
|
- sginfo: add PLIST and GLIST designation to defect lists
|
|
- sg_cmds: split this support file into sg_cmds_basic.[hc]
|
|
and sg_cmds_extra.[hc]
|
|
- add sg_ll_ata_pt() (SATL ATA pass) to sg_cmds_extra.[hc]
|
|
- sg_rdac: fix includes for FreeBSD
|
|
- sg_dd: add 'coe_limit=' option to exit after <n>
|
|
consecutive 'coe' type read errors
|
|
- sgm_dd: print out throughput information when signal arrives
|
|
if time=1 (like sg_dd does already)
|
|
- sg_inq: change '-HHH' so same as '-rr'. Now sg_inq, sg_vpd
|
|
and sdparm output for hdparm with '-HHH'
|
|
-add '-l=<resp_len>' option
|
|
- sg_read_long: add '--pblock' option for physical blocks
|
|
- sg_luns: add '--hex' and '--raw' options
|
|
- sg_requests: add '--hex' and '--raw' options
|
|
- sg_scan: windows version added (was previously linux only)
|
|
- 2 man pages: sg_scan.8l and sg_scan.8w that are installed
|
|
as sg_scan.8
|
|
- archive directory: removed all but rescan-scsi-bus.sh
|
|
- README points to previous version in that directory
|
|
- sg_sat_identify: add to main directory
|
|
- rename earlier version to examples/sg__sat_identify.c
|
|
- sg_ident: rework as spc4r07 changed command names and
|
|
expanded functionality
|
|
|
|
Changelog for sg3_utils-1.21 [20060706] [svn: 70]
|
|
- sg_vpd: new utility for decoding VPD pages. sg_inq's cli is
|
|
cluttered; also borrows from sdparm's VPD handling
|
|
- sg_rdac: new utility for vendor specific work
|
|
- sg_lib: add sg_vpd_dev_id_iter() to iterate over di VPD page
|
|
- add sg_ata_get_chars() to fetch chars from ATA words
|
|
- sync additional sense code strings with spc4r05a
|
|
- add SG_LIB_CAT_NOT_READY category when sense_key is NOT READY
|
|
- add SG_LIB_FILE_ERROR category for open problems
|
|
- add SG_LIB_SYNTAX_ERROR category for command line problems
|
|
- broaden SG_LIB_CAT_MEDIA_CHANGED to SG_LIB_CAT_UNIT_ATTENTION
|
|
- add SG_LIB_CAT_MALFORMED for bad responses
|
|
- BEWARE: these changes cause confusion if an executable from this
|
|
version is run with a libsgutils library from 1.20 or earlier
|
|
- sg_cmds: add SG_LIB_CAT_NOT_READY return to most "ll" functions
|
|
- alter many utilities to report SG_LIB_CAT_NOT_READY
|
|
- sg_dd: add retries=<n> option for sg_io
|
|
- sg_logs: add '-T' option to output protocol specific port log page
|
|
- add support for log subpages (new in spc4r05)
|
|
- more sanity checks in Start Stop Cycle Counter page
|
|
- sg_cmds: add sg_ll_read_long16()
|
|
- add page_code and subpage_code to sg_ll_log_select()
|
|
- add subpage_code to sg_ll_log_sense()
|
|
- sg_read_long: do READ LONG(16) when '--16' given
|
|
- sg_read: accept and ignore 'of=' arguments
|
|
- sg_dd: expand medium/hardware error "coe' processing to include
|
|
the "blank check" sense key (for optical devices)
|
|
- sg_ses: expand display element (per 05-011r2)
|
|
- sg_format: clear 'cmplst' bit (for MO disks)
|
|
- add '--six' ('-6') option for mode sense/select(6)
|
|
- sg_format + sg_test_rwbuf: fix for when char is unsigned
|
|
- sg_inq: VPD page 0x89: output ATA IDENTIFY DEVICE strings
|
|
- for IDENTIFY (PACKET) DEVICE response use sg_ata_get_chars()
|
|
- sg3_utils.html : new name, was previously u_index.html. Copy
|
|
placed in doc subdirectory
|
|
- tools.html : SCSI and storage tools reference, copy placed in
|
|
doc subdirectory
|
|
- sg3_utils.8 : add a new man page containing general information
|
|
especially common exit status values
|
|
- sg_sat_identify: added to examples directory (SAT passthrough test)
|
|
- extend to pass through IDENTIFY PACKET DEVICE with '-p' option
|
|
- sg_sat_chk_power: added to examples directory
|
|
- sg_sat_smart_rd_data: added to examples directory
|
|
- sg_chk_asc: added to utils directory to check asc_ascq codes
|
|
- debian: stop placing archive directory under examples
|
|
- add build_debian.sh script
|
|
|
|
Changelog for sg3_utils-1.20 [20060418] [svn: 68]
|
|
- sg_logs: decode phy event descriptors in SAS port specific
|
|
log page (sas2r03)
|
|
- new parameter control byte format (spc4r03), subpages to come
|
|
- update Makefile (linux) to install sg_io_linux.h + sg_linux_inc.h
|
|
- sg_map26: fix for block device mapping in lk 2.6.16-rc1 and beyond
|
|
- cope with sysfs removal of 'generic' symlink post lk 2.6.16,
|
|
anticipate removal of 'tape' symlink
|
|
- sg_dd, sgm_dd, sgp_dd: fix problem around 0x7fffffff blocks
|
|
- sg_dd: fix read_long processing error (when 'coe=2' or 3)
|
|
- expand 'coe=' to take 0...3 (invokes read long with 2 or 3)
|
|
- allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature
|
|
- sgp_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd)
|
|
- sgm_dd: add 'iflag=' and 'oflag=' arguments; signals (like sg_dd)
|
|
- sg_get_config: double->dual renaming (mmc5r03)
|
|
- sg_read: add 'dpo=' and 'fua=' options
|
|
- allow 'count' < 0 (or 'bpt=0') for issuing zero block READs
|
|
- allow for SG_GET_RESERVED_SIZE yielding 0, lk 2.6.16 feature
|
|
- add 'no_dxfer=0|1' option
|
|
- sg_modes: fix exit value when MODE SENSE fails
|
|
- add '-e' to examine presence of page codes from 0x0 to 0x3e
|
|
- sg_requests: add '--num=' and '--time' options for timing multiple
|
|
invocations
|
|
- sg_inq: fix vpd 0x83 designator code 8 name: "scsi name string"
|
|
- sg_scan: if lk 2.6, use sysfs to find active sg device nodes
|
|
- sg_map: if lk 2.6, use sysfs to find active sg device nodes
|
|
- sg_ses: expand display element (per 05-011r1)
|
|
- sg_start: add an '-i' option which is equivalent to '--imm=1'
|
|
- sg_senddiag: update man page showing use of two scripts in
|
|
examples directory (sdiag_sas_p0_cjtpat.txt and _p1_)
|
|
- sg_lib: fix sg_get_sense_descriptors_str() case 9 (ATA Return)
|
|
|
|
Changelog for sg3_utils-1.19 [20060127] [svn: 66]
|
|
- sg_start: accept '--' options (e.g. 'sg_start --stop')
|
|
- add '--fl=<n>' option for jump to format layer (mmc5)
|
|
- sg_logs: background scan log page, resync with sbc3r03
|
|
- add '-scum' and '-sthr' for setting defaults
|
|
- add device statistics log page (ssc + adc)
|
|
- fix "last n" deferred errors/error events incrementing
|
|
- partial addition of log subpages (spc4r03)
|
|
- sg_get_config: sync features with mmc5 rev 02b
|
|
- sg_wr_mode: mask out dpofua bit in mode select header
|
|
- sg_inq: try harder with '-A' to identify ATA device
|
|
- broaden meaning of '-d' option to decode ...
|
|
- decode software interface id VPD page ('-p=84 -d')
|
|
- decode device capabilities (ssc) VPD page ('-p=b0 -d')
|
|
- sginfo: correct defect list handling ('-d' and '-G')
|
|
- sg_verify: improve error processing (e.g. medium errors)
|
|
- sg_ses: scsi target_initiator port additional element
|
|
status (ses2r14)
|
|
- many: arguments that currently accept '0x' or '0X' to
|
|
indicate a hex number may alternatively take a trailing
|
|
'h' or 'H' to indicate hex
|
|
- sg_lib: update asc/ascq strings (spc4r03)
|
|
- sg_lib+sg_cmds: make independent of linux via
|
|
sg_pt.h function based interface.
|
|
- linux pass through code placed in sg_pt_linux.c
|
|
- rename sg_include.h to sg_linux_inc.h
|
|
- linux specific code in sg_lib.[hc] moved to
|
|
sg_io_linux.[hc]
|
|
- port to FreeBSD: using sg_pt_freebsd.c
|
|
- port to Tru64: using sg_pt_osf1.c
|
|
- sg_cmds: add sg_ll_get_config(), sg_ll_format_unit(),
|
|
sg_ll_reassign_blocks(), sg_ll_persistent_reserve_in+out(),
|
|
sg_ll_read_long10(), sg_ll_verify10(), sg_ll_write_long10()
|
|
- sg_persist: add "allow commands" to report capabilities
|
|
- sg_persist_tst: (examples) takes device node as argument
|
|
- sg_luns: add "security protocol" wlun
|
|
|
|
Changelog for sg3_utils-1.18 [20051118] [svn:63]
|
|
- sg_map26: new utility to map sg devices in lk 2.6
|
|
- sg_luns: luns > 16,384 (sam-4 rev 4)
|
|
- sg_ses: bump fan speed field to 11 bits
|
|
- SAS connector names (ses2r13)
|
|
- sg_inq: add '-rr' option for "hdparm --Istdin"
|
|
- sg_get_config: tracking mmc-5
|
|
- sg_write_long: add support for COR_DIS bit
|
|
- sg_cmds: add sg_ll_test_unit_ready_progress()
|
|
- sg_turs: '-p' option shows progress
|
|
- sg_dd: add 'iflag=' and 'oflag=' options
|
|
- remove output of mode page info when verbose > 0
|
|
- add control of DPO bit via iflag/oflag
|
|
- sg_lib: add sg_get_pdt_str()
|
|
- update asc/ascq strings
|
|
- sg_modes + sginfo: add SAS(2) SSP shared mode subpage
|
|
- doc: rename "html" directory to "doc"
|
|
- Makefile: add 'libtool --finish' to install
|
|
|
|
Changelog for sg3_utils-1.17 [20050922] [svn: 60]
|
|
- sg_inq: add '-a' option for ATA information VPD page
|
|
- add '-b' option for Block limits VPD page (SBC)
|
|
- add '-A' option for probing ATA or ATAPI device
|
|
- increase raw ('-r') and verbose ('-v') output for
|
|
ATA(PI) devices to 512 bytes (was 256 bytes)
|
|
- output hex ('-H') and verbose response for ATA(PI)
|
|
devices in 16 bit words (corrected for endianness)
|
|
- output bytes if '-HH' option given
|
|
- sync with spc4 rev 02
|
|
- sg_lib: add dWordHex() and sg_is_big_endian()
|
|
- sync asc/ascq with spc4 rev 02
|
|
- sg_cmds: defensive prefill for inquiry commands
|
|
- sg_opcodes: sync with spc4 rev 02 (add tmf I_T nexus reset)
|
|
- sginfo: add EBACKERR in Informational exception mode page
|
|
- add Background control mode page (SBC-3)
|
|
- sgm_dd: add 'verbose=<n>' option
|
|
|
|
Changelog for sg3_utils-1.16 [20050810] [svn: 58]
|
|
- sg_ident: new utility to report+set device identifier
|
|
- sg_map: increase MAX_SG_DEVS from 256 to 2048
|
|
- debian: new directory to support deb package builds
|
|
- sg_get_config: add '--current' option, same as '--rt=1'
|
|
- update for DVD+RW Dual Layer
|
|
- sg_inq: add notes in source about use of SCSI INQUIRY
|
|
- decode Management network addresses VPD page ('-m')
|
|
- decode Mode page policy VPD page ('-M')
|
|
- sginfo: increase device mapping capability (> 78 disks)
|
|
- add '-r' option to scan /dev/raw* device nodes [Tim Hunt]
|
|
- sg_dd: change bpt default value to 32 when bs >= 2048 bytes
|
|
- sg_ses: mention SAF-TE in man page
|
|
- sg_readcap: add '-b' option for brief output (2 hex numbers)
|
|
- sg_cmds: add sg_ll_start_stop_unit(), sg_ll_prevent_allow(),
|
|
sg_ll_report_dev_id() and sg_ll_set_dev_id()
|
|
- sg_lib: add extra argument to sense print functions to enable
|
|
the suppression of the raw output of the sense buffer
|
|
- resid > 0 warnings now includes number actually fetched
|
|
- sg_start: add '-load' and '-eject' options
|
|
- default to start action when no other indication given
|
|
- change -imm=0|1 option default to 0 (was 1)
|
|
- gcc 4.0: cleanup warnings (apart from sgp_dd: revisit later)
|
|
|
|
Changelog for sg3_utils-1.15 [20050605] [svn: 56]
|
|
- sg_cmds: sg_get_mode_page_controls(): improve error processing,
|
|
add double fetch
|
|
- sg_turs, sg_rbuf, sg_requests, sg_test_rwbuf, sg_format,
|
|
sg_dd and sgm_dd: add O_NONBLOCK to open()
|
|
- sgm_dd: switch to use SG_IO ioctl (that leaves only
|
|
sgp_dd using the asynchronous sg write()/read() sequence)
|
|
- sg_ses: sync with rev 12 changes
|
|
- sg_map: extend to cope with sparse disk device names with
|
|
up to 3 letters (e.g. /dev/sdaaa) [Nate Dailey]
|
|
- sg_modes: add '-f' option to flexibly decode broken mode
|
|
sense responses.
|
|
- zero prefill response; stop decoding response after 3
|
|
unit attention mode pages seen (i.e. malformed)
|
|
- add '-L' option for LLBAA bit in msense 10 cdb
|
|
- sg_reset: update man page
|
|
- sg_inq: VPD page 0x83: output eui addresses in hex as well
|
|
- Makefile: fix bug in rules for sgp_dd (when 'make dep' used)
|
|
- sg_format: expand explanations in its man page
|
|
- sg_inq, sg_logs, sg_modes, sg_opcodes, sg_rbuf, sg_readcap,
|
|
sg_scan, sg_senddiag, sg_start and sg_turs: allow command
|
|
line to take concaternated options
|
|
- sg_start: add -start and -stop to parallel "1" and "0"
|
|
- sg_senddiag: set pf bit with '-l' option
|
|
|
|
Changelog for sg3_utils-1.14 [20050506] [svn: 54]
|
|
- sg_rmsn: new utility to read media serial number
|
|
- sg_rtpg: add T_SUP bit report
|
|
- sg_ses: ses-2 rev 11 changes (mainly to additional element status)
|
|
- add 'bay number' to SAS additional element status
|
|
- sg_modes: recognise attached enclosure and medium changer
|
|
- sg_inq: spell out non-zero peripheral qualifiers
|
|
- note VS bit preceding MultiP(ort) when latter set
|
|
- VPD page 0x83: output naa addresses in hex as well
|
|
- sginfo: recognise attached enclosure and medium changer
|
|
- increase device mapping capability (to 78 disks)
|
|
[Tim Hunt]
|
|
- sg_senddiag: add option to send raw diagnostic page
|
|
- sg_get_config: update some BD information
|
|
- sg_reasign: add '-g' option to give grown defect list length
|
|
- sg_dd: note default bpt value (128) may be too high for cd/dvds
|
|
- sg_lib: sync with SPC-3 rev 22a [opcodes + asc/q]
|
|
- add DID_IMM_RETRY and DID_REQUEUE [linux specific "host" bytes]
|
|
- sg_cmds: add send+receive diagnostic, read defect data commands
|
|
- add duration output on some commands when verbose > 2
|
|
- spec: change to produce libsgutils (and -devel variant) as well as
|
|
sg3_utils binary rpms
|
|
- sdparm: new utility like hdparm but for SCSI disks (or other devices)
|
|
- moved to its own package called: sdparm
|
|
|
|
Changelog for sg3_utils-1.13 [20050313] [svn: 52]
|
|
- sg_format: new utility to format disks (perhaps change block size)
|
|
- sg_ses: rename "device element" to "additional element" [SES-2 rev 10]
|
|
- add SAS expander and connector elements; add download
|
|
microcode and subenclosure nickname diagnostic pages
|
|
- fix additional element descriptor for SAS
|
|
- off by 1 error when no type descriptor text in config page
|
|
<David dot Baldwin at anu dot edu dot au>
|
|
- sg_logs: log page for background media scan results
|
|
- sginfo: add "-flba64" option for outputting 64 bit lba defect lists
|
|
- sg_get_config: additions for BD from MMC-5 rev 1b
|
|
- sg_lib: add SG_LIB_CAT_ILLEGAL_REQ sense category
|
|
- add sg_get_sense_progress_fld()
|
|
- SPC-3 rev21d updates: report + set timestamp
|
|
- sg_get_num() + sg_get_llnum(): switch to multipliers that
|
|
are compatible with SI and with IEC 60027-2. Used modern
|
|
GNU's dd command as guide.
|
|
- report field replaceable unit code in fixed format
|
|
- sg_dd: add logic to use read_long on unrecovered read errors when
|
|
'coe' set, read just prior to error if 'coe' clear
|
|
- both 'odir' and 'blk_sgio" are honoured on block devices
|
|
- add 'verbose' switch, output some mode page info when verbose
|
|
- print out elapsed time/throughput when signal received
|
|
- add new web page discussing sg_dd, copy in html subdirectory
|
|
- sg_read: add 'blk_sgio' and 'odir' options
|
|
- sg_wr_mode: clear mode data length in mode select(10)
|
|
- sg_test_rwbuf: add long options, allow test to run multiple times
|
|
- sg_cmds: add sg_get_mode_page_types() [get current, changeable, etc]
|
|
- llseek.c: add Makefile rule without "-std=c99", breaks on some archs
|
|
|
|
Changelog for sg3_utils-1.12 [20050121] [svn: 50]
|
|
- sg_wr_mode: new utility to modify (i.e. write to) mode pages
|
|
- sg_reassign: new utility: issues Reassign Blocks command
|
|
- sg_rtpg: new utility: issues Report Target Port Groups command
|
|
[Christophe Varoqui]
|
|
- ATA IDENTIFY command misspelt as "IDENTITY" in several places
|
|
- sginfo: tweak SAS mode pages to match sas 1.1 rev 07
|
|
- add NV_DIS bit to disk caching mode page
|
|
- sg_map: open /dev/nst* rather than /dev/st* (to stop spurious rewinds)
|
|
- sg_lib: ATA return sense descriptor
|
|
- add sg_get_sense_info_fld() to fetch info field from sense data
|
|
- fix bug in sg_scsi_sense_desc_find()
|
|
- add sense key specific decoding for fixed format sense data
|
|
- sg_modes: extend '-p' option to allow '-p=<page_code>,<subpage_code>'
|
|
- add '-A' option to output all mode pages and subpages
|
|
- extend '-l' option to show subpages, selected command set pages
|
|
- sg_inq: fix LUN WWN output in unit path report VPD page (emc)
|
|
[Hergen Lange]
|
|
- sg_get_config: some additions for DVD-R dual layer
|
|
- sg_modes: show write protect (WP) and DpoFua flags for disks
|
|
- sg_cmds: add llbaa argument to sg_ll_mode_sense10()
|
|
|
|
Changelog for sg3_utils-1.11 [20041126] [svn: 48]
|
|
- sg_sync: new utility: invokes the synchronize cache command
|
|
- sg_prevent: new utility: invokes the prevent allow medium removal command
|
|
- sg_get_config: new utility: get configuration command for dvds and cds
|
|
- sg_request: fix, allocation length wasn't set
|
|
- sg_start: remove '-s', as start_stop_unit implicitly syncs caches
|
|
- sg_ses: add SAS expander element type
|
|
- sg_inq: add sanity check to unit serial number (VPD page 0x80)
|
|
- output ANSI version string (e.g. "SPC-2", previously was number)
|
|
- add '-s' option to decode SCSI Ports VPD page
|
|
- sg_logs: decoding of format status and non-volatile cache log
|
|
pages (0x8 and 0x17 in sbc-2)
|
|
- sg_dd: handle compile error when O_DIRECT not defined
|
|
- sginfo: tighten sanity checks around Unit serial number VPD page
|
|
|
|
Changelog for sg3_utils-1.10 [20041030] [svn: 46]
|
|
- sg_readcap, sg_dd, sgm_dd, sgp_dd: fix sg_ll_readcap_10+16 (sg_cmds.c)
|
|
- sg_luns: new utility to report luns
|
|
- sg_logs: with '-t' (show temperature) ignore extra parameters in
|
|
temperature log page (still show them with '-p=d')
|
|
- sg_ses: clean argument sanity checks
|
|
- sg_cmds: add more common command wrappers
|
|
|
|
Changelog for sg3_utils-1.09 [20041022] [svn: 44]
|
|
- sg_ses: new utility to get status and set control on SES devices
|
|
- sg_verify: new utility to verify block devices
|
|
- sg_emc_trespass: new utility for EMC specific trespass mode page
|
|
- sg_request: new utility that sends a REQUEST SENSE command
|
|
- sg_logs: '-r' to reset to manufacturer's defaults
|
|
- decode last n error events and last n deferred errors pages
|
|
- add names of ADC log pages
|
|
- sg_inq: update to SPC-3 rev 21
|
|
- decode Extended INQUIRY data VPD page [0x86] {'-x'}
|
|
- decode Unit Path Report VPD page [0xc0] (EMC) {'-P'}
|
|
- sginfo: decode SAS protocol specific lu mode page
|
|
- sg_err: convert to sg_lib + update to SPC-3 rev 21
|
|
- change GPL to FreeBSD license
|
|
- flag vendor specific asc/ascq ranges
|
|
- libsgutils: library made from sg_lib.c and sg_cmds.c
|
|
- rpm "spec" file additionally builds a "-devel" rpm with
|
|
static libsgutils.a and sg_lib.h and sg_cmds.h
|
|
- utils/hxascdmp.c: add FreeBSD license
|
|
- sg_persist: additions to man page
|
|
- add sg_persist_tst.sh example script to examples directory
|
|
- sg_turs: add '-v' and '-V' options
|
|
- sg_senddiag: add '-v' option
|
|
|
|
Changelog for sg3_utils-1.08 [20040831] [svn: 42]
|
|
- sg_inq: fix noisy message when EVPD and raw modes set
|
|
- for VPD page 0, list supported page names if known {'-e'}
|
|
- add '-d' option to list version descriptors
|
|
- sg_opcodes: numerically sort list of opcodes unless '-u' given
|
|
- add '-a' to sort alphabetically list of opcode names
|
|
- add '-t' to report supported task management functions
|
|
- sg_persist: add 'register and move" PROUT service action
|
|
- add transportId support, document in sg_persist.8 and example
|
|
- sg_modes: handle subpage code for known pages (e.g. control extension)
|
|
- clean up sense buffer handling (allow for descriptor format)
|
|
- SPC-3 draft revision 20a updates
|
|
- sg_write_long: new utility to exercise WRITE LONG command
|
|
- sg_read_long: new utility to exercise READ LONG command
|
|
- sg_err.c: fix compile errors when SG_KERNEL_INCLUDES defined in lk 2.6
|
|
- sg_includes.h typedef of u64 for BLKGETSIZE64 ioctl in lk 2.4
|
|
- add safe_strerror(), sg_scsi_normalize_sense(), sg_normalize_sense()
|
|
and sg_scsi_sense_desc_find() functions
|
|
- add more sense data descriptor format decoding
|
|
- move multiple implementations of dStrHex() into sg_err.c
|
|
- sg_logs: exit if SCSI INQUIRY fails (e.g. when applied to ATA disk)
|
|
- sginfo: bug fixes and SPC-3 revision 20a updates
|
|
- add '-E' option to access Control Extension mode (sub)page
|
|
- sg_start: change '-d' switch to '-v' (verbose) switch for consistency
|
|
- document extra power condition states in man page
|
|
- sg_readcap: output rto_en and prot_en bits from long read capacity data
|
|
- add COVERAGE file to list SCSI command coverage
|
|
|
|
Changelog for sg3_utils-1.07 [20040708] [svn: 40]
|
|
- sginfo: clean up inquiry vendor,product,revision strings
|
|
- '-Fhead': sort defect list by head
|
|
Tom Steudten <steudten at mx dot ch>
|
|
- rework sg_err for better command name coverage: service actions,
|
|
variable length and peripheral device type
|
|
- update asc,ascq codes to SPC-3 revision 19
|
|
- move scsi_devfs_scan to archive directory
|
|
- add sg_opcodes utility to list supported operation codes
|
|
- add sg_persist utility to support persistent reservations
|
|
- add '-i' option to sg_inq to decode device identification VPD page (0x83)
|
|
- sg_inq tries an ATA IDENTIFY if SCSI INQUIRY fails
|
|
- sg_dd, sgm_dd and sgp_dd calculate block device sizes (if count not given)
|
|
- drop SG_GET_VERSION_NUM ioctl guard in most utilities
|
|
|
|
Changelog for sg3_utils-1.06 [20040426] [svn: 37]
|
|
- sg_logs: some HBAs don't like odd transfer lengths so increment
|
|
- do INQUIRY and output product strings
|
|
- add ASCII rendering of the Protocol specific SAS page
|
|
- add '-v' verbose option to output cdb
|
|
- sg_scan: optionally take device file names (e.g. /dev/hdc and /dev/sda)
|
|
- only request 36 byte INQUIRY responses
|
|
- sg_err: add sg_decode_sense() function
|
|
- sg_inq: update output (ref: SPC-3 t10/1416-d rev 17, 28 January 2004)
|
|
- remove '-p' option to print out PCI address of host
|
|
- add '-v' verbose option to output cdb
|
|
- sginfo: allow '-u' to take hex arguments (prefixed by '0x'),
|
|
when subpage value is 255 show multiple subpages
|
|
- accept /dev/hd? ATAPI devices directly in lk 2.6
|
|
- add '-t <pn>[,<spn>]' argument; like '-u' but decodes page
|
|
if it recognizes it
|
|
- drop '-L' argument
|
|
- add cd/dvd, tape, SES, more disk and more SPC-3 decoded mode pages
|
|
- add transport protocol decoded mode pages for SPI-4, FCP and SAS
|
|
- sg_modes: print all subpages when '-subp=ff' is selected
|
|
- do INQUIRY and output product strings
|
|
- add '-v' verbose option to output cdb
|
|
- Makefile: add -W compile flag and fix exposed warnings
|
|
- .spec file: change to build on Mandrake without errors
|
|
|
|
Changelog for sg3_utils-1.05 [20031112] [svn: 35]
|
|
- sginfo: major rework; add IE page, clean up control, cache +
|
|
disconnect pages (as per SPC-3 and SBC-2).
|
|
- when storing, update saved page (change from previous version)
|
|
- use 10 byte mode sense and select by default (override with '-6')
|
|
- mode subpage support
|
|
- sg_dd, sgm_dd + sgp_dd:
|
|
- 64 bit capable (read capacity; count, skip and seek values).
|
|
- numerical arguments accept hex (prefixed by '0x' or '0X')
|
|
- require bpt > 0
|
|
- fix problem when reading /dev/null
|
|
- sg_dd: Treat SIGUSR1 properly: print stats and continue;
|
|
- sgp_dd: reduce READ CAPACITY response size to 8 bytes
|
|
- sg_read: require bpt > 0
|
|
- sg_test_rwbuf: switch from sg_header to sg_io_hdr interface
|
|
N.B. After these changes no sg3_utils utilities (in the main directory)
|
|
use the sg_header interface
|
|
- sg_scan: switch from sg_header to sg_io_hdr interface
|
|
- sg_senddiag: increase extended foreground timeout to 60 minutes
|
|
- sg_inq: add names of peripheral device types
|
|
- sg_readcap: show total size in bytes, MB, GB
|
|
- sg_logs: read log pages twice (first time to get response length), for
|
|
fragile HBAs; decode Seagate 0x37 + 0x3e pages; display pcbs
|
|
- sg_modes: fix core dump when corrupted response, don't print extra pages
|
|
- sg_map: increase sg device scanning from 128 to 256
|
|
- change man page references from lk 2.5 to lk 2.6
|
|
- examples/sg_iovec_tst: added testing sg_iovec (sg_io_hdr iovec's)
|
|
[retrospective addition to this log: "#define __user" added into
|
|
sg_include.h so user space programs aren't broken if they choose
|
|
to include kernel header.]
|
|
- utils/hxascdmp: add utility for displaying ASCII hex
|
|
|
|
Changelog for sg3_utils-1.04 [20030513] [svn: 33]
|
|
- all remaining utilities in the main directory have man pages [thanks
|
|
to Eric Schwartz <emschwar at debian dot org> for 7 man pages]
|
|
- add CREDITS file
|
|
- sg_simple1, sg_simple2, sg_simple3, sg_simple4, sg_simple16 and
|
|
scsi_inquiry: moved to the examples directory
|
|
- sg_debug: moved to the archive directory
|
|
- sg_modes: add '-subp=<n>' for sub page code, suggests 6/10 byte
|
|
alternative if bad opcode sense received, flip -cpf flag to -pf,
|
|
add page names for most peripheral types
|
|
- sg_turs: default '-n=' argument to 1, only when '-n=1' print error
|
|
message in full
|
|
- sg_logs: print temperature "<not available>" for 255, '-t' switch
|
|
for temperature (from either temperature or IE log page)
|
|
- sg_dd: add '-odir=0|1' switch for O_DIRECT on block devices
|
|
- sg_start: add '-imm', '-loej' and 'pc=<n>' switches plus man page
|
|
- sg_readcap: add '-pmi' and 'lba=<n>' switches
|
|
- open files O_NONBLOCK in sg_inq, sg_modes and sg_logs so they
|
|
can be used on cd/dvd drivers when there is no disk present
|
|
|
|
Changelog for sg3_utils-1.03 [20030402] [svn: 30]
|
|
- sg_senddiag: added, allows self tests and listing of diag pages
|
|
- sg_start: changed to use SG_IO so works on block devices
|
|
- sg_err: print out some "sense key specific" data [Trent Piepho]
|
|
- sg_modes: add "-6" switch for force 6 byte MODE SENSE [Trent Piepho]
|
|
- sg_modes: more information on page codes and controls
|
|
- sg_inq, sg_modes, sg_logs, sg_senddiag: add man pages
|
|
- sg_dd: add "append=0|1" switch for glueing together large files
|
|
- note in README about utilities offered by scsirastools package
|
|
|
|
Changelog for sg3_utils-1.02 [20030101] [svn: 28]
|
|
- sg_inq: check if cmddt or evpd bits ignored
|
|
- sg_inq: warn -o=<n> not used for standard INQUIRY
|
|
- sg_turs: add -t option to time Test Unit Ready commands
|
|
- sg_errs: (used by most utilities) warn if sense buffer empty
|
|
- sg_modes: make safe with block SG_IO (bypass SG_GET_SCSI_ID ioctl)
|
|
- sg_logs: make safe with block SG_IO, self-test page work
|
|
- sg_dd: add "blksg_io=" switch to experiment with block SG_IO
|
|
- sg_read: now use SG_IO ioctl rather than sg write/read
|
|
- sginfo: fix writing parameters, check for block devices that answer
|
|
sg's ioctls, recognize "scd<n>" device names
|
|
- sg_map: stop close error report on tape devices
|
|
- sg_readcap: make safe with block SG_IO
|
|
- sg_start: make safe with block SG_IO
|
|
- sg_test_rwbuf: make safe with block SG_IO
|
|
|
|
Changelog for sg3_utils-1.01 [20020814] [svn: 27]
|
|
----------------------------
|
|
- add raw switch ("-r") to sg_inq [Martin Schwenke]
|
|
|
|
Changelog for sg3_utils-1.00 [20020728] [svn: 26]
|
|
----------------------------
|
|
- update sg_err [to SPC-3 T10/1416-D Rev 07 3 May 2002]
|
|
- "sg_inq -cl" now outputs opcode names
|
|
- add "continue on error" option to sg_dd
|
|
- add _LARGEFILE64_SOURCE _FILE_OFFSET_BITS=64 defines to Makefile
|
|
- drop 'gen' argument from sg_dd and friends, allow any file types
|
|
except scsi tape device file names
|
|
- treat of=/dev/null as special (skip write). Accept of=. as alias
|
|
for of=/dev/null
|
|
- decode various log pages in sg_logs
|
|
- add 'dio' argument to sgm_dd for testing "zero copy" copies
|
|
|
|
Changelog for sg3_utils-0.99 [20020317]
|
|
----------------------------
|
|
- add 'fua' and 'sync' arguments to sg_dd, sgp_dd and sgm_dd
|
|
- improve sg_inq, add "-cl" and "-36" arguments
|
|
- add sg_modes + sg_logs for MODE SENSE and LOG SENSE queries
|
|
- add rescan-scsi-bus.sh [Kurt Garloff] to archive directory
|
|
|
|
Changelog for sg3_utils-0.98 [20020216]
|
|
----------------------------
|
|
- move sg_reset back from archive to main directory + build
|
|
- sprintf() to snprintf() changes
|
|
- add "time=<n>" argument to sg_dd, sgp_dd and sgm_dd to time transfer
|
|
- add man pages for sgm_dd and sg_read, update sg_dd and sgp_dd man pages
|
|
- add "cdbsz=" argument to sg_dd, sgp_dd, sgm_dd + sg_read
|
|
- add "gen=0|1" argument to sg_dd
|
|
|
|
Changelog for sg3_utils-0.97 [20011223]
|
|
----------------------------
|
|
- move isosize to archive since introduced into util-linux-2.10s
|
|
|
|
Changelog for sg3_utils-0.96 [20011221]
|
|
----------------------------
|
|
- add '-p' switch to sg_inq to provide PCI slot_name
|
|
- add '-n' switch to scsi_inquiry for non-blocking open
|
|
- new sgm_dd (dd variant) using mmap-ed IO
|
|
- sg_rbuf now has a '-m' argument to select mmap-ed IO
|
|
- sg_rbuf now has a '-t' switch to do timing + throughput calculation
|
|
- add sg_simple4 to demonstrate mmap-ed IO on an INQUIRY response
|
|
- add sg_simple16 to do a READ_16 (16 byte SCSI READ command)
|
|
- mmap-ed IO requires sg version 3.1.22 or later
|
|
- add sg_read to read multiple times starting at same offset
|
|
|
|
Changelog for sg3_utils-0.95 [20010915]
|
|
----------------------------
|
|
- make sg_dd, sgp_dd and archive/sgq_dd warn if dio selected but
|
|
/sys/module/sg/parameters/allow_dio is '0'
|
|
- sg_map can now do any INQUIRY (when '-i' argument given)
|
|
- expand example in scsi_inquiry
|
|
|
|
Changelog for sg3_utils-0.94 [20010419]
|
|
----------------------------
|
|
- add sg_start, documented in README.sg_start [Kurt Garloff]
|
|
- add osst support in sg_map [Kurt Garloff]
|
|
- improvements to sginfo [Kurt Garloff]
|
|
|
|
Changelog for sg3_utils-0.93 [20010415]
|
|
----------------------------
|
|
- more include file fine tuning
|
|
- some "dio" work sg_rbuf
|
|
- extend sgp_dd so "continue on error" works on normal files
|
|
- introduce sg_include.h to encapsulate sg include problems
|
|
- add scsi_devfs_scan
|
|
- add sg_bus_xfer to archive directory
|
|
- more error info in sginfo
|
|
|
|
Changelog for sg3_utils-0.92 [20010116]
|
|
----------------------------
|
|
- change sg_err.c output from stdout to stderr
|
|
- change sg_debug to call system("cat /proc/scsi/sg/debug");
|
|
- fix in+out totals in sg_dd and sgp_dd when partial transfers
|
|
- lower include dependencies in sg_err.h
|
|
- add sgq_dd + Makefile to archive directory
|
|
|
|
Changelog for sg3_utils-0.91 [20001221]
|
|
----------------------------
|
|
- signalling handling added to sg_dd (and documented in sg_dd.8)
|
|
- add man page for sg_rbuf (and a small change to its code)
|
|
- add "-d" switch to isosize and cope with > 2 GB (and man page)
|
|
|
|
Changelog for sg3_utils-0.90
|
|
----------------------------
|
|
- switch from dated versioning. Previous version was sg3_utils001012.
|
|
Arbitrarily start at package version 0.90 . Start Changelog.
|
|
- incorporate Kurt Garloff's patches from Suse scsi.spm source rpm
|
|
compilation:
|
|
- add Kurt Garloff's sg_test_rwbuf utility to read and write to disk
|
|
buffer
|
|
- clean up Makefile to include a "make install" (and also add a
|
|
"make uninstall").
|
|
- add "-uno" switch to sginfo
|
|
- make raw and sg devices equally acceptable to sg_dd and sgp_dd.
|
|
[Raw devices still not as fast as sg devices doing disk to disk
|
|
copies in sgp_dd but this may be improved soon. Still faster than
|
|
using dd!]
|
|
- change lseek() in sg_dd and sgp_dd to _llseek() [using code borrowed
|
|
from fdisk] so big disks can be properly offset with 'skip' and
|
|
'seek' arguments. [This change is significant for raw devices and
|
|
normal files since sg devices already use 31 bit block addressing.]
|
|
- rename sg_s3_inq to sg_inq. This utility allows the INQUIRY response
|
|
to be decoded as per SCSI 3 and 4. Also can probe VPD and CmdDt pages.
|
|
- change multiplier suffixes on sg_dd, sgp_dd and sg_turs so lower case
|
|
"k, m, g" are powers of 2 while "K, M, G" are powers of 10. This idea
|
|
borrowed from lmdd (lmbench suite)
|
|
- retire a few more less used utilities into the archive directory.
|
|
- add man pages for sg_dd, sgp_dd and sg_map
|