131 lines
4.5 KiB
Plaintext
131 lines
4.5 KiB
Plaintext
###############################################################################
|
|
#Board Varaints and Versions are defined below:
|
|
#BOARD_VARIANT_NXPREF 0x01
|
|
#BOARD_NXPREF_VERSIONS(0x01, 0x02)
|
|
|
|
#BOARD_VARIANT_CUSTREF1 0x2A
|
|
#BOARD_CUSTREF1_VERSIONS(0x01,0x02,0x03)
|
|
|
|
UWB_BOARD_VARIANT_CONFIG=0x01
|
|
UWB_BOARD_VARIANT_VERSION=0x01
|
|
|
|
#Default device node is /dev/srxxx,
|
|
#you can override it if your kernel driver is exposing it as another name.
|
|
#NXP_UWB_DEVICE_NODE="/dev/sr100"
|
|
|
|
###############################################################################
|
|
# Extended CofigID
|
|
#DELAY_CALIBRATION_VALUE E400
|
|
#AOA_CALIBRATION_CTRL E401
|
|
#DPD_WAKEUP_SRC E402
|
|
#WTX_COUNT_CONFIG E403
|
|
#WIFI_COEX_FEATURE E405
|
|
##Note: WIFI COEX CONFIG Disabled by default, if required add the
|
|
## config (E4, 05, 04, 00, 3C, 1E, 1E) and update the
|
|
## Lentgh and number of parameter accordingly in the header part.
|
|
## WIFI COEX feature supports only in user binary.
|
|
#CLK_CONFIG_CTRL E430
|
|
##Note: Config for clock source selection and refer UCI specification
|
|
## for more information.
|
|
#UWB_WLAN_5GHZ_CHANNEL_INTERFERENCE_LIST E432
|
|
##Note: List of problematic channels in 5GHz Range, if required add
|
|
## config (E4, 32, 03, 120, 124, 128) and update the
|
|
## Length and number of parameters accordingly in header part.
|
|
#TX_PULSE_SHAPE_CONFIG E428
|
|
# Refer the NXP UCI specification for below configs
|
|
#ANTENNA_RX_IDX_DEFINE E460
|
|
#ANTENNA_TX_IDX_DEFINE E461
|
|
|
|
UWB_CORE_EXT_DEVICE_DEFAULT_CONFIG={20, 04, 00, 23, 05,
|
|
E4, 02, 01, 00,
|
|
E4, 03, 01, b4,
|
|
E4, 28, 04, 02, 02, 02, 00,
|
|
E4, 60, 07, 01, 01, 02, 01, 00, 01, 00,
|
|
E4, 61, 06, 01, 01, 01, 00, 00, 00
|
|
}
|
|
|
|
##Note: Session specific default app config configured here
|
|
#ANTENNAS_CONFIGURATION_RX E31C
|
|
|
|
NXP_UWB_EXT_APP_DEFAULT_CONFIG={01, E3, 1C, 03, 01, 01, 01}
|
|
|
|
##Note: Below configs are applicable in User_Mode FW only
|
|
##Note: WIFI COEX CONFIG Disabled by default, if required add the
|
|
## config (E4, 05, 04, 00, 3C, 1E, 1E) and update the
|
|
## Lentgh and number of parameter accordingly in the header part.
|
|
## WIFI COEX feature supports only in user binary.
|
|
#WIFI_COEX_UART_USER_CFG E437
|
|
## UART based WiFi-CoEx Interface User Configuration. default value 0
|
|
#FREQ_OF_UWB_REQ_WLAN_CHANNEL_INFO E439
|
|
## Configure the frequency of UWB Requests to WLAN for getting WLAN Channel Information. Default value 3
|
|
## if required add the
|
|
## config (E4, 39, 01, 03) and update the
|
|
## Length and number of parameter accordingly in the header part
|
|
|
|
UWB_USER_FW_BOOT_MODE_CONFIG={20, 04, 00, 08, 01,
|
|
E4, 05, 04, 00, 3C, 1E, 1E
|
|
}
|
|
|
|
###############################################################################
|
|
# Helios PROD Mode FW version
|
|
# Make sure you push the Production FW while using this Macro
|
|
NXP_UWB_PROD_FW_FILENAME="libsr100t_prod_fw.bin"
|
|
|
|
# Helios Dev Mode FW version
|
|
# Make sure you push the Dev Mode FW while using this Macro
|
|
NXP_UWB_DEV_FW_FILENAME="libsr100t_dev_fw.bin"
|
|
###############################################################################
|
|
|
|
###############################################################################
|
|
#enable or disable fw download logging
|
|
UWB_FW_DOWNLOAD_LOG=0x00
|
|
###############################################################################
|
|
|
|
###############################################################################
|
|
# set Crystal calibration seetings
|
|
# byte[6] 38.4 MHz XTAL CAP1
|
|
# byte[7] 38.4 MHz XTAL CAP2
|
|
# byte[8] 38.4 MHz XTAL GM CONTROL
|
|
|
|
NXP_UWB_XTAL_38MHZ_CONFIG={2E, 11, 00, 05, 05, 02, FF, FF, 21}
|
|
|
|
###############################################################################
|
|
# This config enable/disable the Vendor extended notifications
|
|
# 00 for disable
|
|
# 01 for enable
|
|
NXP_UWB_EXTENDED_NTF_CONFIG={20, 04, 00, 05, 01, E4, 33, 01, 01}
|
|
|
|
###############################################################################
|
|
###############################################################################
|
|
# Core Device configurations
|
|
# Below sections needs to be updated with the correct values for needed core device configurations
|
|
|
|
#NXP_CORE_CONF_BLK_1={}
|
|
|
|
#NXP_CORE_CONF_BLK_2={}
|
|
|
|
#NXP_CORE_CONF_BLK_3={}
|
|
|
|
#NXP_CORE_CONF_BLK_4={}
|
|
|
|
#NXP_CORE_CONF_BLK_5={}
|
|
|
|
#NXP_CORE_CONF_BLK_6={}
|
|
|
|
#NXP_CORE_CONF_BLK_7={}
|
|
|
|
#NXP_CORE_CONF_BLK_8={}
|
|
|
|
#NXP_CORE_CONF_BLK_9={}
|
|
|
|
#NXP_CORE_CONF_BLK_10={}
|
|
|
|
|
|
NXP_LOG_JNI_LOGLEVEL=0x05
|
|
NXP_LOG_UCI_CORE_LOGLEVEL=0x05
|
|
NXP_LOG_UCIHAL_LOGLEVEL=0x05
|
|
NXP_LOG_FWDNLD_LOGLEVEL=0x05
|
|
NXP_LOG_TML_LOGLEVEL=0x05
|
|
NXP_LOG_UCIX_LOGLEVEL=0x05
|
|
NXP_LOG_UCIR_LOGLEVEL=0x05
|