unplugged-system/hardware/nxp/uwb/halimpl/hal/phNxpUciHal_ext.h

53 lines
2.0 KiB
C

/*
* Copyright 2012-2020, 2022 NXP
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _PHNXPUCIHAL_EXT_H_
#define _PHNXPUCIHAL_EXT_H_
#include <phNxpUciHal.h>
#include <string.h>
#define UCI_GID_NXP_PROPRIETARY 0x0D /* 1101b Proprietary Group */
/* Extended device core configirations */
#define EXTENDED_DEVICE_CONFIG_ID 0xE4
#define UCI_EXT_PARAM_DELAY_CALIBRATION_VALUE 0x00
#define UCI_EXT_PARAM_AOA_CALIBRATION_CTRL 0x01
#define UCI_EXT_PARAM_DPD_WAKEUP_SRC 0x02
#define UCI_EXT_PARAM_WTX_COUNT_CONFIG 0x03
#define UCI_EXT_PARAM_DPD_ENTRY_TIMEOUT 0x04
#define UCI_EXT_PARAM_WIFI_COEX_FEATURE 0x05
#define UCI_EXT_PARAM_TX_BASE_BAND_CONFIG 0x26
#define UCI_EXT_PARAM_DDFS_TONE_CONFIG 0x27
#define UCI_EXT_PARAM_TX_PULSE_SHAPE_CONFIG 0x28
#define UCI_EXT_PARAM_CLK_CONFIG_CTRL 0x30
#define UCI_PARAM_ID_LOW_POWER_MODE 0x01
/* Extended Uci status Reason code */
#define UCI_EXT_STATUS_SE_RECOVERY_FAILURE 0x72
#define UCI_EXT_STATUS_SE_RECOVERY_SUCCESS 0x73
#define UCI_EXT_STATUS_SE_APDU_CMD_FAIL 0x74
#define UCI_EXT_STATUS_SE_AUTH_FAIL 0x75
tHAL_UWB_STATUS phNxpUciHal_send_ext_cmd(uint16_t cmd_len, const uint8_t* p_cmd);
tHAL_UWB_STATUS phNxpUciHal_write_ext(uint16_t* cmd_len, uint8_t* p_cmd_data,
uint16_t* rsp_len, uint8_t* p_rsp_data);
tHAL_UWB_STATUS phNxpUciHal_process_ext_rsp(uint16_t cmd_len, uint8_t* p_buff);
tHAL_UWB_STATUS phNxpUciHal_set_board_config();
#endif /* _PHNXPNICHAL_EXT_H_ */