40 lines
1.7 KiB
Plaintext
40 lines
1.7 KiB
Plaintext
# This is the output (in hex) of the SCSI REPORT ZONES command
|
|
# from a simulated ZBC device from the scsi_debug driver in Linux.
|
|
# The parameters to the scsi_debug driver given to modprobe were:
|
|
# dev_size_mb=512 zbc=managed zone_size_mb=128 zone_nr_conv=1
|
|
#
|
|
# The hex bytes in this file were generated by:
|
|
# sg_rep_zones /dev/sg1 -HHH > /tmp/rep_zones.hex
|
|
# where /dev/sg1 was a scsi_debug device.
|
|
|
|
# An example invocation:
|
|
# sg_rep_zones --inhex=rep_zones.hex
|
|
|
|
|
|
# parameter data header (64 bytes)
|
|
00 00 01 00 00 00 00 00 00 00 00 00 00 0f ff ff
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
|
|
# first zone descriptor, zone type: conventional
|
|
01 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00
|
|
00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
# second zone descriptor, zone type: sequential write required
|
|
02 10 00 00 00 00 00 00 00 00 00 00 00 04 00 00
|
|
00 00 00 00 00 04 00 00 00 00 00 00 00 04 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
# third zone descriptor, zone type: sequential write required
|
|
02 10 00 00 00 00 00 00 00 00 00 00 00 04 00 00
|
|
00 00 00 00 00 08 00 00 00 00 00 00 00 08 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
# fourth and last zone descriptor, zone type: sequential write required
|
|
02 10 00 00 00 00 00 00 00 00 00 00 00 04 00 00
|
|
00 00 00 00 00 0c 00 00 00 00 00 00 00 0c 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|